Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

51 Precision Semi Partscaster - The Bass Fender Forgot to Make


Bridgehouse

Recommended Posts

Ever since doing a 51 Precision parts caster build I've always fancied the idea of a single-coil semi acoustic version.

I looked and looked, but Fender never really did what I wanted. Surprised, I decided to do my own. So a chat to Graham at GSPBASSES and a body and neck was ordered.

Body and neck came a while back, and it's now floated to the top of the projects pile - so it's time to make it!!

Here it is as arrived:

eqE1l76.jpg

0aqZptL.jpg

Link to comment
Share on other sites

I quite fancied a stain on this one, and black hardware. So I've been busy procuring suitable black hardware. 

Canvassing the Basschat massive, the opinion was "natural!"

Off I trotted to fetch the Tru Oil. Instead, I found a Danish Oil with a light amber tint. Hmm. Best of both worlds.

Weather is good. It's Friday. I have no more work this week. Time to slather some oil on it.

First coat:

qWUnoiQ.jpg

ua0najl.jpg

  • Like 1
Link to comment
Share on other sites

I'm not an expert. I'm very much a have-a-go amateur, and I know my skills are limited.

I have to say, though. For those of you who fancy a partscaster and are worried about finishing and messy paints - Danish Oil has to be the simplest of them all.

Go to B&Q and get some Liberon Danish Oil. Get a nice lint free cloth. Pour some into a plastic tub. Wet cloth with it. Rub on. Rinse and repeat, and leave for 6-12 hours ever 3 or 4 coats.

That's it. No messing. No over applying. No runs or worries. Dead easy and looks flippin' great.

Link to comment
Share on other sites

It’s good stuff for sure. I used some water based artist’s paint as a stain on my Telecaster and then applied coats of  Danish Oil over it. I let it dry and then lightly waxed - all good.

64FBA2F8-7027-45D6-9A37-FBF4FC06CB36.jpeg

Edited by ezbass
  • Thanks 1
Link to comment
Share on other sites

30 minutes ago, ezbass said:

It’s good stuff for sure. I used some water based artist’s paint as a stain on my Telecaster and then applied coats of  Danish Oil over it. I let it dry and then lightly waxed - all good.

64FBA2F8-7027-45D6-9A37-FBF4FC06CB36.jpeg

Never seen a 6 string bass with a tremelo before.....🙄

Link to comment
Share on other sites

15 minutes ago, BrunoBass said:

Looking forward to seeing how this project  develops, I love the idea of a semi ‘51.

How is the body constructed? Chambered with a top cap?

Yes, it's a swamp ash routed body with a swamp ash cap.

I could have gone with any wood combo, but decided that to stick with the thin line feel would require swamp ash top and back. There's two large routes either side of a block running down the middle - very much like a thin line telecaster. 

It is, however, quite a bit lighter than the solid 51P bass partscaster I did earlier. 

  • Like 1
Link to comment
Share on other sites

I'm a Tru Oil neck kinda guy - I like the silky smooth finish you can get with a nicely sanded Tru Oil finish. 

The neck for this build is a little bit different, but not much. It's a standard telecaster style headstock, but thinned a bit for extra weight relief (I have multiple tactics to stop neck dive including lighter headstock and tuners and a big fat bridge) 

Nut width is 44mm so big and wide. 

Here it is:

0uoxHyI.jpg

And then after a couple of coats of Tru Oil:

KBpI5Pn.jpg

Link to comment
Share on other sites

Small aside..

The bridge on this bass was always going to be problematic. I need heft - as I need to minimise neck dive due to lightweight body, and so a normal bent steel fender style bridge wasn't going to cut it.

Similarly, I wanted black. Anyway, at the guitar show in Birmingham I went to see Grainger Guitars who sold me this rather magnificent lump of (I presume) brass which really is quite a hefty  chunky thing.. 

It's beautifully engineered and has the right weight to it as well..

kCoQnVF.jpg

TptiTyW.jpg

 

Link to comment
Share on other sites

8 hours ago, Bridgehouse said:

I'll rinse and repeat tomorrow with more danish oil on the body and more tru oil on the neck. 

Just had a look at the body and the danish oil has dried nicely. Not sure whether to do one or two more repeats... hmm..

Go for 3, that’ll allow you to knock it back a little and get a nicer finish. 

Link to comment
Share on other sites

Second round done. You have to be careful with colour matching and consistency with the tinted danish oil, but otherwise it’s going on well:

nHhHG7A.jpg

QVV5xN0.jpg

 

It’s starting to take on that nice satin sheen naturally, so I think a third round is in order and then a good drying off before some light buffing. I’m really liking the antique/old refinish look of it - sort of “stripped and refinished in the 60s” look..

  • Like 3
Link to comment
Share on other sites

6 minutes ago, SpondonBassed said:

I enjoyed doing oil finishes on mine too.  I'm crap with a brush or sprayer so it suits me well.

I’ve sprayed a few. I find spraying stressful and oil finishes relaxing. Plus, the grain on this was too good to hide ;)

Link to comment
Share on other sites

6 hours drying and 3rd coat just gone on.. 

slEig6R.jpg

ic06IGM.jpg

5vWfTwd.jpg

MaMjA7E.jpg

 

Needs a dry off and then flatting down - I will use a combination of 0000 wool, wet and dry, and a very fine sanding/finishing block I have - and then a coat of polish to give it some sheen.

  • Like 2
Link to comment
Share on other sites

33 minutes ago, Bridgehouse said:

6 hours drying and 3rd coat just gone on.. 

slEig6R.jpg

ic06IGM.jpg

5vWfTwd.jpg

MaMjA7E.jpg

 

Needs a dry off and then flatting down - I will use a combination of 0000 wool, wet and dry, and a very fine sanding/finishing block I have - and then a coat of polish to give it some sheen.

That's looking great!! 😀

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...