Andyjr1515 Posted November 21, 2016 Author Share Posted November 21, 2016 [quote name='martthebass' timestamp='1479736108' post='3178836'] Same question from me Andy [/quote] PM sent Quote Link to comment Share on other sites More sharing options...
allighatt0r Posted November 21, 2016 Share Posted November 21, 2016 That red one looks great! Quote Link to comment Share on other sites More sharing options...
Chienmortbb Posted December 18, 2016 Share Posted December 18, 2016 My old Peavey P bass copy is plywood and it is why I was eventually convinced that the wood of the body does not affect the tone much (hardly at all). The Peavey has a great necl and I was gong to build a new body but I might try this instead. Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 18, 2016 Author Share Posted December 18, 2016 [quote name='Chienmortbb' timestamp='1482066393' post='3197304'] My old Peavey P bass copy is plywood and it is why I was eventually convinced that the wood of the body does not affect the tone much (hardly at all). The Peavey has a great necl and I was gong to build a new body but I might try this instead. [/quote] That Epiphone Junior turned out to be plywood. One of the best sounding guitars I'd ever had.... Other than the tendency for it to be a bit heavy, structurally there is nothing wrong with plywood at all Quote Link to comment Share on other sites More sharing options...
TheGreek Posted December 18, 2016 Share Posted December 18, 2016 God I hate you guys...I just looked at one of the websites Grangur posted and they have some unbelievably gorgeous veneers...makes me want to change the facings on all my painted basses... Well I know one person Santa won't be making happy this Xmas!! 1 Quote Link to comment Share on other sites More sharing options...
Rich Posted September 7, 2018 Share Posted September 7, 2018 Fabulous stuff, just what i need as I'm planning to have a bash at this sort of thing myself on an old and massively beaten up short scale mahogany Overwater. @Andyjr1515 , is PVA definitely the thing to use or would Titebond 3 be ok? I only ask because I have some TB3 but no PVA. Quote Link to comment Share on other sites More sharing options...
Christine Posted September 7, 2018 Share Posted September 7, 2018 A new thread on me, I've never seen veneering done like that, almost a hybrid hide glue method remelting damp PVA and a very quick setting as it loses heat I imaging Quote Link to comment Share on other sites More sharing options...
Jimothey Posted September 7, 2018 Share Posted September 7, 2018 14 minutes ago, Christine said: A new thread on me, I've never seen veneering done like that, almost a hybrid hide glue method remelting damp PVA and a very quick setting as it loses heat I imaging Yeah I was maybe the same as you only used hide glue for veneering but I used this method on my neck thru build and in my opinion this works just as well and a lot easier than getting the hot pot out, also the smell of hide glue used to turn my stomach so that's a bonus!! 😀 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted September 7, 2018 Author Share Posted September 7, 2018 1 hour ago, Rich said: Fabulous stuff, just what i need as I'm planning to have a bash at this sort of thing myself on an old and massively beaten up short scale mahogany Overwater. @Andyjr1515 , is PVA definitely the thing to use or would Titebond 3 be ok? I only ask because I have some TB3 but no PVA. I think probably yes but have never tried it. Just try a small patch of veneer on an offcut of sanded wood - it's a pretty instant process so you will know straight away. Don't know if the waterproofing of titebond 3 makes a difference... Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted September 7, 2018 Author Share Posted September 7, 2018 (edited) 46 minutes ago, Christine said: A new thread on me, I've never seen veneering done like that, almost a hybrid hide glue method remelting damp PVA and a very quick setting as it loses heat I imaging Yes - almost instant result. Holding the veneer bond for 10 secs or so of cooling is all it takes to fully grip. If you see my current Dreadnought Acoustic thread, I've just applied one of the pairs of binding in the same way and it worked a treat...and there are a lot of bend stresses with wood binding but it seems to hold as well as glued wet and fully clamped. The pva is dry before ironing so you can come back to it hours or days later and just heat to remelt. Seems to be fully repeatable too... Edited September 7, 2018 by Andyjr1515 1 Quote Link to comment Share on other sites More sharing options...
Rich Posted September 7, 2018 Share Posted September 7, 2018 9 minutes ago, Andyjr1515 said: I think probably yes but have never tried it. Just try a small patch of veneer on an offcut of sanded wood - it's a pretty instant process so you will know straight away. Don't know if the waterproofing of titebond 3 makes a difference... I'll give it a trial run. Tb3 is quite PVA-like in some ways -- water-solubility etc -- so hopefully it 'll work. I'll let you know! 1 Quote Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.