Jump to content
Why become a member? ×

Scruffy Fender Precision Lyte


Paul S
 Share

Recommended Posts

I picked this up recently unseen - a red '90-91 Fender Precision Lyte. Sold by a daughter whose bass playing father had recently died.

[attachment=82330:lyte1.jpg] [attachment=82331:lyte2.jpg] [attachment=82332:lyte3.jpg]
[attachment=82333:lyte4.jpg] [attachment=82334:lyte5.jpg]


I paid a reasonable price for it - £300 - but must admit I was disappointed to see the condition of the bodywork as it has been badly refinished at some point in it's life, although the colour is right I think. A few little other minor issues - jack socket and 1 pot need replacing, clean and set up mainly. But so far as I can tell from bedroom levels it sounds great and plays fantastically well - superb neck. And really lightweight and comfy. In fact everything it said on the tin, really.

What would you do with it if it were yours? I am *really* undecided. The paint is so bad that I look at it and think 'I could do much better myself' and am tempted to have a bash - especially after reading a lot of the refin threads on here by novices. In which case I would probably want to paint it black (I know, not an easy colour to paint but anything would be better than it is now). The major issue with a re-fin is the headstock decal has all the info on it - serial number etc. Is it too cheeky to get this reproduced? I guess not and maybe this way wouldn't completely devalue the bass. My inclination is to completely stealth it, change all the hardware to black Gotoh - I would prefer the look of it but imagine also it would devalue it considerably, especially if I did away with the original style of headstock decal. But does that, in fact, matter?

Or should I just leave thing alone, get used to the paint finish and stop being so shallow? :) It doesn't affect the playability, after all, and is a part of the basses history.

Be really interested to read different points of view and tips.

Edited by Paul S
Link to comment
Share on other sites

A lot of the problem with that finish is because it has been oversprayed without cutting back. I'd be tempted to try working up through the grades of finishing paper to get rid of the orange peel, then either polishing it to a shine directly or clearcoating it. You'd keep the colour that way.

I'd do it on the back first though in case it didn't work as well as I hoped!

Link to comment
Share on other sites

If the finish isn't great (and bothers you enough to do something about it) but refinishing it in a different colour would cause issues with the headstock why not have the body refinished in the same colour?

Better finish but no issues with headstock & decal?

Depends how set on black you are I suppose.

Edit - doesn't look too bad to me anyway

Edited by rOB
Link to comment
Share on other sites

[quote name='LawrenceH' post='1265958' date='Jun 12 2011, 12:31 PM']A lot of the problem with that finish is because it has been oversprayed without cutting back. I'd be tempted to try working up through the grades of finishing paper to get rid of the orange peel, then either polishing it to a shine directly or clearcoating it. You'd keep the colour that way.

I'd do it on the back first though in case it didn't work as well as I hoped![/quote]


Just out of curiosity what do you use to polish?

Link to comment
Share on other sites

[quote name='waynepunkdude' post='1266519' date='Jun 12 2011, 07:55 PM']Just out of curiosity what do you use to polish?[/quote]


I use cutting polish from Halfords as most of the resprayed basses I've owned have been done with rattle cans. Just don't press too hard with the cloth or you end up going through to the wood very quickly :)

Link to comment
Share on other sites

[quote name='waynepunkdude' post='1266519' date='Jun 12 2011, 07:55 PM']Just out of curiosity what do you use to polish?[/quote]

On a couple of mine I took it up to 2000 grit and then use Halfords rubbing compound in the yellow tube, and then T cut. How easy it was to get a good shine differed between a polyurethane finish (quite easy) and rattlecan lacquer (slow, and easy to cut too far as Delberthot says!). My father is a mechanic who used to do a lot of bodywork with lacquers back in the day - he reckons the 3M stuff would do it quicker and go very fine indeed.

Edit: Oh yeah, and the key to getting a decent finish with the rattlecans from my experience is in putting down a decent amount of clearcoat, in really thin layers, with plenty of waiting between each, which is a nightmare if you get picky about dust etc. That Halfords stuff takes an age to harden if you put it down too thick. That was my mistake and after a month it was still soft enough that firm pressure would leave an imprint. I think now after about 6 months it's sufficiently hard for me to use in rehearsals etc without having to worry about dents!

Edited by LawrenceH
Link to comment
Share on other sites

I do a lot of refins and usually I'm happy with a matt finish but I'm doing one at the moment that I want a gloss Fender like finish with, I have been doing the usual stuff, primed, lots of cutting back between coats but when it's finish I want it to come up nice.

I'm using this


[url="http://www.manchesterguitartech.co.uk/shop/surf-green/"]http://www.manchesterguitartech.co.uk/shop/surf-green/[/url]

Link to comment
Share on other sites

[quote name='LawrenceH' post='1266853' date='Jun 13 2011, 12:35 AM']Oh yeah, and the key to getting a decent finish with the rattlecans from my experience is in putting down a decent amount of clearcoat, in really thin layers, with plenty of waiting between each[/quote]

and another useful tip is to warm the rattle can before spraying by standing it in warm water, it helps the lacquer to fully atomise in the nozzle meaning less droplets hitting the body. Just remember to fully dry the rattle can with a cloth before spraying as wet lacquer and water dont mix :)

Link to comment
Share on other sites

[quote name='JPJ' post='1267273' date='Jun 13 2011, 01:36 PM']and another useful tip is to warm the rattle can before spraying by standing it in warm water, it helps the lacquer to fully atomise in the nozzle meaning less droplets hitting the body. Just remember to fully dry the rattle can with a cloth before spraying as wet lacquer and water dont mix :)[/quote]

Oh and by the way, I had one these in the same candy apple red. Was a great lightweight bass with powerful active eq. The only downside was a rather flexible neck, I felt like I was constantly tweaking the truss rod.

Link to comment
Share on other sites

[quote name='JPJ' post='1267273' date='Jun 13 2011, 01:36 PM']and another useful tip is to warm the rattle can before spraying by standing it in warm water, it helps the lacquer to fully atomise in the nozzle meaning less droplets hitting the body. Just remember to fully dry the rattle can with a cloth before spraying as wet lacquer and water dont mix :)[/quote]

Oh yes, I did that as well - only thing is it makes the stuff flow a LOT faster so you have to adjust or you very quickly build up too thick for one coat. Gently warming the body itself also drives off residual moisture and means the lacquer flows on neatly and hardens quicker too. Helps with the dust.

Wayne, from what I understand the nitro clear coat they supply will be easier to work with than the Halfords stuff - plus I think the nozzles are better on those cans making it simpler to get coats thin and even. If not you can get replacement nozzles that angle the spray flatter and wider which is useful.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...