jay-syncro

He is indeed, very creative too.

Yes that's the Dragonfly forearm contour, Danny mentions it in the video. It's easier to make out on this bass - https://bassdirect.co.uk/bass_guitar_specialists/Dragonfly_FAT-J5.html

It's 47mm at the nut and the string spacing is 18mm.

Me too. I've just realised I really like buying & trying basses. Quelle surprise.

It is indeed. I did the same only I have no self control 😬

Dragonfly Fat J5 Jazz up for grabs. This bass is absolutely awesome in terms of build quality, looks and sound. To get the full lowdown and hear this actual bass in the hands of a master, check out the video below. The Bass is 5 string custom Jazz Bass, Alder Body, 5 piece maple neck with walnut stringers, the headstock is capped in Maple and the fingerboard is flamed maple. The Bass is handmade and the finish and build quality is second to none, up there with Atelier, Xotic etc. The hardware is all high end GOTOH, the pick ups are hand wound Dragonfly customs, flush finished in walnut casings. The pre-amp is the Harrys Engineering DFBP-3, LOW/MID/TREBLE boost/cut, with mid notch. There is a mid cut/boost switch, active/passive select, master tone, master volume and balance. It's and absolute beast. It's in very good condition but does have a few small knocks as shown in the photos. Collection from Margate or buyer to arrange courier etc.

Thanks 👍

Bump for this beauty.

Thanks mate 👍 Just to confirm, this isn't one of the RSD Metro Express basses! This is a pre-warwick made in Japan bass..

£675?

Bump.

Price drop bump.

PM'd

Fair point!

I'm open to electric guitar trades, too.

Two fairly solid reasons to not buy it 😁

£725?

Electric only please.

Well, I've read that three times and am none the wiser 😁

Thanks, has a great smooth feel to it too. I may trade for a guitar if anyone has one gathering dust?

On hold in record time!

Correction, it's not a flamed maple top and back, it's a solid flamed Alder body! OP updated.

Vigier Excess in the trans black with beautiful solid flamed Alder body. Maple neck with carbon rod (90% maple, 10% carbon) means no truss rod is required and it's solid as a rock. It's easy to get a very low action if desired (currently set up pretty low), and the neck is an absolute joy to play. The 18v Vigier preamp has bass and treble cut/boost and is a great match for the single coil hum cancelling pickups. Modern articulate tones are easily achievable but boost the bass and cut the treble and it's an absolute beast. These are often described as an updated Rickenbacker tone-wise and I can see why. It has been gigged and has the odd small ding but is in great condition overall. Comes with the Vigier/Hiscox case and user manual, tools etc

Errr, pass! Looks nice though.

Bass Monkey P Bass made by @Walshy. This is a very lightweight (3.75kg), resonant, high quality Precision made with some excellent parts. The neck is an old Fender Allparts "B" width neck made of quarter-sawn maple with a lovely ebony fretboard. It has a bone nut and Gotoh Resolite reverse tuners. The body is lightweight swamp ash and is fitted with a Badass II bridge, Kent Armstrong vintage pickups, CTS pots and Switchcraft jack. The nitro Lake Placid Blue finish was done by Dave Wilson to a high standard, very special indeed. It's in excellent condition, but being nitro it does have some light swirls here and there as it's been played. It'll age and wear very well over time no doubt. The bass sounds great, really punchy and full sounding. It's very loud acoustically too which is always a good thing in my book. I'm attempting to stick to one bass at the moment (stop laughing at the back!), hence the sale. Collection from Margate or I can package it up if you'd like to arrange a courier to collect. It comes with the flight case pictured.