Bankai

Correct. Personally, I use SMAART to achieve that aim and then apply the result via a graphic at the end of the process. I'm a bassist as well as a sound engineer, so have no fear. The two backline heads I have here are an Ampeg SVT-II Pro (which has an in-built switchable DI and is used on post-EQ) and an Orange AD200B (which doesn't have it's own DI, so the 'slave output' connection is used with a high quality DI box). I don't see how picking some generic EQ could produce a better result than an exact EQ replication of a cab, thus a defacto cab-sim. Could you go into a bit more detail on this one and help me understand what you mean? In the case of the Ampeg unit, it rolls off at about 6kHz so compared to a lot of the more modern 12" based units that are increasingly commonplace it certainly is as you say. Still, using the impulse curve as a starting point, I can then tailor something to give the required presence. I hadn't thought of that, but shall start taking a look over there as that's a very good suggestion. I might see if I can find a nice 2x12" replication too, so there's something a bit more FRFR in my arsenal too for if someone has a similiar cab they bring to a gig. Thanks

First of all, money. It’d be £200 for a Sansamp BDDI. Secondly, in this scenario I am not the player, I am the sound engineer. So I need a solution that is simple for the player(s). Not all bassists (or any musician) are created equal. With quick turnarounds, novice musicians, and many things to manage at once, I don’t wish to have an expensive little box on stage that can go walkies, or have its settings changed and mess things up. I dislike DIing a bass straight. It means you get none of the flavour of the amp head, the gain structure, the EQ, etc. All things which make a considerable contribution to our tone when we play. I dislike mic’ing a bass cab. They can get knocked, are an additional expense, and generally don’t capture ‘the full picture’. The mic adds as much colour as the cab does, unless you’re using a very neutral LDC or similiar, which is generally not viable in a small venue. I am aware it is quite commonplace generally to do take a dry DI and mix it with a cab mic, and have done this previously but find it introduces too many variables and still doesn’t really give a ‘gold standard’ end result. The solution I am left with, is using a good quality DI from the head that is being used, so I get the ‘full flavour’. I’m lucky enough to be using a Midas M32R so I can do a lot to the signal once it arrives at the desk, and one of those is replicate the EQ curve inherent in an Ampeg SVT810E (the backline cab), and thus I now have ‘the perfect DI’. Perfect, as I have an exact(ish) replica of the sound on stage, and it requires no additional input from the musician on stage beyond setting up their amp as they would normally, there’s nothing to get knocked, or buttons to get played with by mistake, and it’s easy to manage when you have multiple acts on a night. Plus, the audial end result is (in theory) going to be superior to the other solutions. Coming back to the point I made before; not all bassists are created equal. That goes both ways, in that this is my way of acquiring a good sound from those who are using backline or maybe their own lower end kit, or those who maybe aren’t as experienced and don’t really know how to deal with a Sansamp being put in front of them. And it’ll produce a far better sound than any of the other options. However, when a band is playing who has a bassist who knows what they’re doing with kit (chances are, one of you lot!) they’ll probably have their own Sansamp (or equivalent) and know how to use it. Or potentially, some well thought out rack unit accompanied by a FRFR cab for monitoring. And when that happens, it’s even better as I’ll take what they can give me from that and do even better with it. The aim is to produce a consistent and good quality FoH bass sound, no matter the rig or the player. As I’ve got the 8x10 and not much to do at the moment, I think I might use SMAART and try and produce an exact impulse curve. I asked the question here as I was hoping someone might already have done it to save me the trouble! I appreciate the sound of an 8x10 may not be the desirable tone for a lot of players, but the purpose of this EQ curve is for when someone IS using the provided 8x10, so that when they EQ the head to make the stage sound how they want, it has the same effect out front rather than producing an FoH sound that is different/sub-par.

Beautiful, I’ll use that as a starting point. For those curious, this is the graph on the link:

Thanks but not the solution I’m after.

Not an answer.

Scenario: I DI an amp head live to run it to the FoH PA. This takes the sound of the head, but the head’s gain and EQ have been set for the cab and thus the DI signal doesn’t sound quite right through FoH, as the sound that comes from the PA is not same as the sound that comes from the 8x10 the amp is connected to. This is due to the PA being FRFR (or close to), and the 8x10 being highly colourised. Question: What EQ should be applied to the DI signal when it arrives at the FoH desk to tailor it and make it sound similiar to how it does coming out of the 8x10? So far, I’ve started with rolling off anything below about 30Hz and anything above 6.5KHz, but an 8x10 definitely isn’t linear between those frequencies. I was hoping maybe someone had previously done a plot/graph to show where one would need to cut/boost in order to ‘cab sim’ an 8x10. Specifically in this case, an Ampeg SVT810E. I am aware there are other avenues which achieve varying degrees of success, such as using a specific cab sim DI, or using a clean DI of the bass before it arrives at the amp, or selecting ‘pre-EQ’ on the amp head DI (if fitted). However, they won’t achieve what I’m after so for this scenario please pretend those options don’t exist!

Peavey have just brought out a new guitar head which for the first time features a built-in isolated power out for powering various effects pedals. It’s a feature that has been very well received so we may see it crop up on other peavey models in future.

Yes, I wouldn't entertain the idea of a 4x12 for a child! To keep it budget safe, I would go second hand and suggest the Blackstar range given his chosen genre, and look at one of their small low power head. I wouldn't get a combo because that'll be limiting down the line. Instead by doing head/cab, as and when the time comes in future he/you can upgrade one of the components individually rather than being 'locked' into a package. Combos are generally open back too, which means you won't get much heft off of the sound and it'll sound thin. https://www.ebay.co.uk/itm/Blackstar-HT5-Guitar-Tube-Amplifier-Head/274293917735?hash=item3fdd310827:g:-V0AAOSwp6ReXZSf The Blackstar HT5 for example. 5 valve watts which through a decent 2x12 (or larger) will be enough for any rehearsing or any small gigs. Plus, as it's only 5 watts you can properly work the amp rather than having to run it on 1! Also has emulated headphone out for late night bedroom playing, and an emulated DI with cab sim should he find himself at a larger gig which the head can't handle on it's own. It's small enough he can put it in a rucksack and take it with him somewhere to a gig/rehearsal room/etc and plug into their cab if needed. There is the HT20 if you feel you want to go 1 more rung up the ladder. For a cab to go with the HT5, I would recommend a Harley Benton G212 Vintage. They are super cheap whether you get them new or second hand, considering their sound. They get rave reviews. I know a lot of local bands using them and have heard one in person and couldn't really fault it. Make sure to get the Vintage variant as it's loaded with Celestion V30s which are the definitive rock guitar speaker and a massive improvement over the standard driver. Run it vertically rather than horizontally and you'll have a rig that doesn't take up much floor space at all. https://www.ebay.co.uk/itm/Harley-Benton-G212-Vintage-Guitar-Cab/193418857997?hash=item2d08a98e0d:g:~Y8AAOSwYodekY7B Second hand, that's £250. On the wattage front, I worked as a guitar tech on a tour with the darkness a few years ago. In O2 Academy venues, with all the proper monitoring and PA, their Vox AC30 2x12 was so loud they had to have it facing the rear of stage in order to produce an acceptable level for the stage and audience. So, when it's valve watts you talk about, 5 can definitely do what most people need!

This was always a big one for me. Without him changing any effects or settings, I loved the dynamic range that came out of his set-up and it introduced serious Thumb GAS in me for a while. The chorus, verse, bridge, outro, they all have a distinct feel and sound. Mostly down to technique but Warwick does contribute significantly to the tone!

an excellent choice! I always loved this live version.

My SVT810E, now accompanied by a well used AD200B..

Yes, that Blue Ric almost almost got me but I managed to escape with my wallet.

On the topic of the active-passive discussion. I’ve found that when using a decent tube amp that using passive on the Sandberg seems to produce better results, but if using a simple DI or poor amp (i.e rehearsal room or venue backline) then active is best. Could it be placebo or has anyone else found similiar?

The Beyerdynamic DT250 is the FRFR of headphones.

If it’s strictly a headphone amp you’re after then I recommend the Fiio Q1ii. Very portable and does the job well, with the ability to act as purely a headphone amp, or to take a signal from USB or lightning.

How much money do you want to spend? https://www.darkglass.com/creations/microtubes-b7k-ultra-with-aux-in/ Not only a pre-amp, but also a headphone amp, with an aux in, and a world class DI that you can use live.

I should clarify, I mean Todobajos include shipping in their prices on Reverb. Not all of the retailers on there.

If you buy via Reverb, shipping is free and included in the item price

Ask and you shall receive. I'm not a good player, so forgive the very aggressive fingering. I play the same thing four times: 1st time: DI via an amp sim, fingers over the P pickups 2nd time: DI via an amp sim, fingers over the M pickup 3rd time: Straight DI, fingers over the P pickups 4th time: Straight DI, fingers over the M pickup All without EQ, compression etc. All settings on the bass are flat. Drop D Riedel Demo.wav

If you want to buy a Sandberg, I recommend the following seller: https://reverb.com/shop/todobajos They’ve got a load listed with heavy discounts, plus they are very receptive to the ‘make an offer’ function at the moment due to the economic climate. They’re a bass guitar only store, and really are specialists in the matter and are one of the largest in Europe. Reverb only has some of their offerings, but their website has the remainder. The website had some nice markbass prices too. I ordered the Riedel signature on Wednesday last week from them and it arrived on Tuesday. Perfectly packaged, and exactly as described! Plus I got it at £400 off what would have been the standard price.

That model only has the older ‘standard’ USB

On my 2017 Macbook Air, no matter the default setting Photobooth will still use the built in microphone.

I am not a photographer, but I present my new acquisition. I used to work in GuitarGuitar and so had a lot of time to myself to endlessly play high-end basses. Sadowsky, Lakland, Fender Custom Shop, G&L, the list goes on. In all that time, there were two basses which stood out for me above all the others (yes, even the £3000 Sadowsky!). One was a 1980s Rickenbacker 4001, and the other was the Sandberg VM4. I could afford neither, but resolved that one day I'd buy a Sandberg VM4 and as I didn't really like the stock finishes I'd do a custom order of black body, black pickguard, black hardware, rosewood fretboard, and hardcore aged. Fast forward 9 years, and I discover that Sandberg now make the Oliver Riedel (Rammstein) signature model which has all of the options I would pick myself given free choice. Well, decision made! Plus, the hardware is a very tasteful black nickel rather than the cheap looking glossy black you usually see. It also has their uprated 'Black Label' pick-ups instead of the standard Sandberg ones, so you get a hotter and more aggressive tone. So here we have it; the Sandberg California II / VM4 Oliver Riedel Signature Model. Lucky me. download.mp4

I just acquired a fridge which has seen a hard life. So I thought I'd start a thread in here for those wonderful bits of kit which have been 'hardcore aged' the old-fashioned way. If you've got something that looks like it has seen better days but it's still going then please contribute, but anything that came out of the shop pre-aged is disqualified!