I was going for the vintage look on this one, the cab will match it but the cab will be just rectangular and the front of it will be replaceable so I can make it look a bit more modern if I do a different style head............😀
It’s almost done just need to put my logo on it and wire in the jack socket on the back
I don’t think it’s come out too bad for s first attempt...........😀
The lower horn and the bridge end is quite angular then the top horn is curved I would probably try and make it a bit more angular so it ties in with the rest but don’t get me wrong it does look good the way it is.............👍
Here’s the original body back on I’m thinking of removing the block as I don’t think they go too well with the body or I might change them to white instead............😀
i weighed the bass before I changed the body and it weighed 5.4kg and now with the original body back on it weighs 3.6kg...............👍
It’s really not that big it’s only 300mm wide x 150mm high it would look a bit pathetic of it was only just bigger than the control plate as that is 210mm wide x 45mm high
I managed to skive off work a bit this afternoon so I made a start on the head casing
I was going to do it rounded on the top edges but after looking at it I’ve decided not to and I’m going to mitre the corners instead
I think I’m going to do the face in Beige speaker cloth and Black carpet on the outside to match the cab............😀
Because that’s far too easy!!............😜
My plan is to buy an Amp head at some point so if I build the 2 x 10 cab now I’ll have it ready.............
This going to be running along side a 2 x 10 bass cab build aswell so unfortunately till the cab is done I can’t test it? But if it works I might do it with a more powerful combo............🤔
I’ve seen on YouTube a few videos saying you can make a nice sounding head out of a crappy 10w practice amp so I thought I’d give it a go
So far I’ve dismantled my bb blaster 10w practice amp and will start making the new case for it................🤞
Bit of an update on this project the body is too heavy and a bit uncomfortable for me to play so I’ve decided to refinish the original body in satin black and add a pickguard to make a look a bit different
i still need to strip off the veneer and either colour match the headstock or leave it Maple I’ll decided once the veneer is off.........😀
I’ve been offered a 30w practice amp for next to nothing because the speaker is farting a bit the rest of the amp works fine
My plan is to build a sealed 2 x 10 cab with a removable back and use the amp to power them I know that the amp isn’t really powerful enough to run them at volume but it’s only going to be home use and my plan is to re-use the cab with a separate amp head when I can afford one
So my question is if the amp is rated at 4ohms then would the 2 new speakers need to be 8ohms to run them in parallel so they would end up being 4ohm or would that not work?? I haven’t got a clue when it comes to this kinda stuff so any advice would be greatly appreciated.........😀
I don’t take offence at all mate extract away!!
Sometimes I need to curb my spontaneity because some of the time the choices I make are sooo wrong!!!!.............😳