fleabag

I'll check that - thanks

Dont go walking round New Hampshire in one of these

Cheers Stub - though i may feck it up by pressing the wrong buttons. I dont know what i'm doing with something like that

Had a look but couldnt find any " stretch " button. There is something called Analyze , which i tried, and this is what the result was. As above , dont know how useful this is

Ok, last try - did a phone recording, since at least i can save those to Laptop. Open E plucked at mid point , 12th fret. Then open file in Audacity, and screen shot it, but how this might help, i dont know bass recording.mp3

Here's a screen grab. I've tried a couple of times, but since there is no SAVE button, i'm stumped as to why this recording prog even exists

Aha Found internal recording thingy, and its recording the bass, but bizarrely, there is no SAVE button. I dont get it. Such a palava. Back in the cupboard

Just tested the mic and its working fine. Problem is, googling how to record sound hasnt revealed any answers. I spoke into the mic, and can hear that on headphones, but whether it was recording or not, i have no idea. Do i need external software recording proggy ?

Googled my lenovo lappie and it has built in mic, but never used it so i can only assume it works. Which website are you thinking - i didnt see any mention of that

How to attach a mic to a laptop - i suppose it would have to be a USB mic ? I dont have a mic and not sure how you record a waveform

One last test before storage - as the amp was detached from the combo, i hooked it up to my 1x15 and got the same buzzing / light farting, so i'm pretty sure its the amp. At least i know that much

Wise words The cupboard is the only place for the combo

Unfortunately i've reached the end of my lectronic talents, which is poor to start with, so that went over my head

Decided to pull the whole PCB out and check all the solder joints but nothing seems amiss. Looking like a tech problem, and since i cant take it to my local tech, its back in the cupboard for this combo.

If in doubt -

Yup, that white gunk looks messy - i'll give it a wiggle

There doesnt seem to be any problem with TR5 that i can see Its quite a large photo, but it seems you have to click on it a few times to get a big picture

I've done an equal pressure test of cones and they're fine. I dont have a spare amp, to try that tone test

Thanks stub - i'll pull the amp out tomorrow and check that pesky TR5 If it needs a bolb , i'll sort it

Just as a guess, i reseated the drivers, equal torquing down , in case the basket was slightly warped due to uneven mounting, but that changed nothing. I'm beginning to wonder if its the amp

The crossover is disabled as the tweeter is just a hissy pile of poo. I dont use the sub-octave, so its permanently switched out ... same with the compressor. I dont know what the letters mean any other ideas Stub ?

Recording - just using open E. Bass EQ rolled off completely. Sounds like i;m really attacking the string but it was just a normal bedroom level pluck Voice 001.mp3

Oh boy. Failure to sort the problem. Now with Beymas fitted, still getting this low volume buzzing ( like a delicate farting i suppose ) nothing like what i thought a speaker farting would sound like Its from both drivers, and it happens at any volume, input gain at low medium or high, bass eq rolled off completely, varying the main volume , varying eq , changing cables. I'm stumped right now

Thats not what you asked. See your own post