ShaunB

Reduced bum

Hmmmm, I've just realised my inside leg measurement is the same length as the scale length... certainly not what I was expecting.

Morning H.K.H... String spacing: 19mm at the bridge / 11.5mm at the nut Nut width: 41mm / (just under 1 5/8") Neck width at the 12th fret: 55mm / 2 3/16" in old money) Inside leg: 34" helps? cheers Shaun

Splunk!

...and replied :-)

It is indeed and Facebook!

Bump, bump-a-diddle-it

[color=#333333]Great little mixer in good condition - only [s]£40[/s] £35! + £5.50 P&P[/color] [color=#333333]...From Tapco/Mackie: [/color] [color=#333333]We've seen and tested plenty of small-format mixers but few can match the quality and features of the TAPCO Blend 6. The compact Blend 6 is a great-sounding six-channel mixer with genuine Mackie-designed mic preamps and robust construction. Its sound quality lives up to the Mackie heritage of low noise and transparency. [/color] [color=#333333]TAPCO by Mackie Blend 6 Mixer at a Glance: [/color] [color=#333333]Compact mixer with plenty of input options [/color] [color=#333333]Outputs can feed main plus monitor signals [/color] [color=#333333]Rugged design to withstand constant use [/color] [color=#333333]Compact mixer with plenty of input options [/color] [color=#333333]Despite its small size the Blend 6 is loaded with I/O. It has two mono mic/line channels with input gain controls and level-set LEDs. The balanced XLR mic inputs have switchable phantom power, and the 1/4" TRS instrument input jacks accept balanced or unbalanced line-level signals. In addition, the Blend 6 has two stereo line-input channels, accepting balanced or unbalanced line-level input signals. All the channels have high and low EQ controls, one monitor aux send (pre-fader), one effects aux send (post-fader), a pan control (balance control on the stereo channels), and a rotary level control. Channel EQs on the Blend 6 are comprised of a 12kHz high-frequency shelving EQ, and an 80Hz low-frequency shelving EQ. [/color] [color=#333333]Outputs can feed main plus monitor signals [/color] [color=#333333]The Blend 6's Aux Return to Mains knob controls how much of the effects signal to add to the main mix. The Aux Return to Monitors knob lets you add effects to the stage monitor mix independent of the effects levels added to the main mix. The outputs on the Blend 6 include TRS balanced/unbalanced main outputs, control room outputs, and aux sends, RCA tape outputs, and a TRS stereo headphones output. The control room output can be switched between the main stereo bus or the stereo tape input. The "Tape to Main" switch can also route the tape input to the main stereo bus. The Blend 6 includes 8-segment LED meters to indicate the signal level at the control room/phones outputs. [/color] [color=#333333]Rugged design to withstand constant use [/color] [color=#333333]The Blend 6 is designed for rugged, 24-hours-a-day use. Its sturdy construction houses durable double-sided SMT-plated fiberglass circuit boards. Impact-resistant knobs are mounted so they "ride" just above the steel chassis, absorbing impact to minimize damage. It's great for continuous operation in any sound reinforcement and mixing application. With these features and practical routing capabilities, the Blend 6 offers versatility plus the peace of mind that comes from owning a Mackie-designed mixer! [/color] [color=#333333]TAPCO by Mackie Blend 6 Mixer Features: [/color] [color=#333333]Mackie-inspired design [/color] [color=#333333]Two high-headroom mic preamps [/color] [color=#333333]Two mono mic/line, two stereo line channels [/color] [color=#333333]Pre-fader aux (monitor) send [/color] [color=#333333]Post-fader aux (effects) send [/color] [color=#333333]Effects-to-main control [/color] [color=#333333]Effects-to-monitor control [/color] [color=#333333]Level set gain-setting indicator LEDs [/color] [color=#333333]2-band EQ, Pan (mono channels) and Balance (stereo channels) controls on all channels [/color] [color=#333333]Headphone output with level control [/color] [color=#333333]Control room output with level control [/color] [color=#333333]8-segment stereo LED metering [/color] [color=#333333]CD/Tape stereo inputs with Tape to Mix switch and Tape to Control Room switch [/color] [color=#333333]Master 48-volt phantom power switch with LED indicator [/color] [color=#333333]Power LED indicator[/color]

Updated with Jazz-orientated trades considered :-)

I'm not using this any more so it should go to a new home. Trade wise, something jazz orientated. Here's Fleabay85's link from whence it came: (and great pics BTW). [url="http://basschat.co.uk/topic/240840-fsft-parker-fly-bass-graphite-custom-shop-32kg-sold/page__p__2602105__hl__parker%20fly__fromsearch__1#entry2602105"]http://basschat.co.u..._1#entry2602105[/url] It's still in fab shape and now comes with an oversized Hiscox case and a Parker gig bag. Any questions, ask away - and sadly, no trades. cheers Shaun

Bumperooney

...to the top!

∆ upwards...

...and replied.

[color=#333333][font=verdana, arial, helvetica, sans-serif][size=4][font=verdana,geneva,sans-serif]Couple of D5 mics - great condition... £30 each or £55 the pair. (+p&p)[/font][/size][/font][/color] [color=#333333][font=verdana, arial, helvetica, sans-serif][size=4][font=verdana,geneva,sans-serif]From AKG:[/font][/size][/font][/color] [color=#333333][font=verdana, arial, helvetica, sans-serif][size=4][font=verdana,geneva,sans-serif]AKG D5 Professional Dynamic Vocal Microphone that will easily give the SM58 a run for it's money![/font][/size][/font][/color] [color=#333333][font=verdana, arial, helvetica, sans-serif][size=4][font=verdana,geneva,sans-serif]Cuts through the mix! For lead and backing vocals the D5 professional dynamic vocal microphone for lead and backing vocals delivers a powerful sound even on the noisiest stage. Its frequency-independent supercardioid polar pattern ensures maximum gain before feedback.[/font][/size][/font][/color] [color=#333333][font=verdana, arial, helvetica, sans-serif][size=4][font=verdana,geneva,sans-serif]The D5 stands for a crisp sound that cuts through every mix. The dual shock mount eliminates any kind of mechanical noise for trouble-free live use. The audience will hear the pristine sound of your voice![/font][/size][/font][/color][list] [*][size=4][font=verdana,geneva,sans-serif]Patented laminated Varimotion diaphragm for crisp sound that cuts through every mix[/font][/size] [*][size=4][font=verdana,geneva,sans-serif]High feedback suppression with supercardiod polar pattern for trouble-free use with on stage monitoring[/font][/size] [*][size=4][font=verdana,geneva,sans-serif]Dual shock mount of microphone capsule that eliminates any kind of handling noise[/font][/size] [*][size=4][font=verdana,geneva,sans-serif]Integrated pop filter for elimination of pops and wind noise[/font][/size] [*][size=4][font=verdana,geneva,sans-serif]Spring-steel wire-mesh grille and rugged die-cast housing to withstand every live performance[/font][/size] [/list] [color=#333333][font=verdana, arial, helvetica, sans-serif][size=4][font=verdana,geneva,sans-serif]Specification[/font][/size][/font][/color][list] [*][size=4][font=verdana,geneva,sans-serif]Polar Pattern: supercardioid[/font][/size] [*][size=4][font=verdana,geneva,sans-serif]Audio Frequency bandwidth: 70 to 20000 Hz[/font][/size] [*][size=4][font=verdana,geneva,sans-serif]Sensitivity: 2.6 mV/Pa[/font][/size] [*][size=4][font=verdana,geneva,sans-serif]Electrical Impedance: 600 Ohms[/font][/size] [*][size=4][font=verdana,geneva,sans-serif]Recommended Load Impedance: 2000 Ohms[/font][/size] [/list]

Stageclix Jack Wireless system - the best wireless system I've used. I believe this is Version one (or two) not the 5.8GHz - but fully functional and the only system I've had that sounds the same as plugging' it in! The transmitter charges by plugging it into the receiver, so you can always charge it up. More bumpf here: [url="http://www.andertons.co.uk/guitar-amp-instrument-wireless/pid16128/cid761/stageclix-jack-digital-wireless-guitar-38-bass-system.asp"]http://www.andertons...bass-system.asp[/url] [url="http://www.profitron.fi/Ajankohtaista_files/stageClix%20Digital%20Wireless%20Guitar%20and%20Bass%20Systems%231.pdf"]http://www.profitron...Systems%231.pdf[/url] This also comes with the strap pouch and extension lead if you don't want an unsightly dongle sticking out of your bass. Any questions, ask away... pics:

Just looked out of the window and indeed I am in Sunny Poole in Dorsetshire... (I did PM Jake earlier)

Behringer B205D Eurolive monitor - Great personal monitor - really loud - good condition, comes with mic stand mount and top mount for mic stand boom arm - however, this top fitting is quite loose and the boom tends to droop (know the feeling!)... perfect for floor or stand mount. [size=4][font=arial,helvetica,sans-serif]Specs and details here:[/font][/size] [size=4][font=arial,helvetica,sans-serif][url="http://www.behringer.com/EN/Products/B205D.aspx"]http://www.behringer...ucts/B205D.aspx[/url][/font][/size] [size=4][font=arial,helvetica,sans-serif]Collection or courier at cost.[/font][/size]

Bump :-)

No longer needed, so off it goes. Very good condition. £50.00 + post/courier at cost. cheers, Shaun

Thanks all - I have amended the post to include the very specific trades...

Very deep bump....

Bumpaliscious!