Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Hofner solid body basses + NBD


Dazed
 Share

Recommended Posts

Any experts on here? Recently picked up an interesting one I’d never seen before, not that I know much about Hofners in general other than the Beatle bass connection. 
 

I’ll get some pics up hopefully later today. 
After some research I’ve found it’s from the early 70’s, possibly only made for a year, two at most. Model number 192. 

 

1972 HOFNER MODEL 192 BASS GUITAR

HOFNER MARKETING PHOTOGRAPH

 

PHOTO COURTESY OF KARL HÖFNER GmbH & Co. KG, HAGENAU, GERMANY

 

 

IMG_3457.thumb.jpeg.eb5b31c840b29897c2924ab5d3640080.jpeg

 

Edited by Dazed
Link to comment
Share on other sites

I didn’t see one on eBay? Have you got the link saved or remember anything if the ad, location etc?

 

I found it in fb marketplace and it has to be one of the most difficult purchases I’ve ever made, considering it was in the same country and I replied within 4 hours of the ad going online. Took 6 weeks to finally get to buy it!

Link to comment
Share on other sites

Some pics I took yesterday, haven’t cleaned it yet. Spot the 5 pence 😉

 

I’m really impressed with the build quality and materials. It’s a solid body, looks

to be some form of maple, not sure about the neck but it’s a bound jazz width with rosewood fingerboard. Decent tuners, hefty bridge. A thick 3 ply tortoiseshell type pickguard and your common or garden P bass electrics that sound good so far. Still have to set it up for me. As much as I like the Hofner branded bridge cover and pickup cover I’m don’t like how restrictive they are so they’ll be coming off. 

Seems I’m becoming a Sunburst collector

too… a colour I avoided for 30 odd years but have grown to like in the last 10. Weighs a smidge over 8lbs. It’s got a few dings and scratches, genuine wear and really nothing to drastic considering it’s 50+ years old. 
 

IMG_3798.thumb.jpeg.2d1ff12447f9401c8c9c4933fdadd95b.jpeg
 

IMG_3802.thumb.jpeg.a0adebe606e1971b8fb291dd6fb67711.jpeg
 

IMG_3799.thumb.jpeg.d82e16f0a262d76ee50ed4dc0fc51a0c.jpeg

 

IMG_3805.thumb.jpeg.7c67eb526f9120609caf2e6e4a6407c3.jpeg

IMG_3800.thumb.jpeg.fb062e940165df566664cceec6ede0ab.jpeg

 

IMG_3809.thumb.jpeg.2be96830c9e244905a9ae832fdb6131c.jpeg

 

IMG_3807.thumb.jpeg.e79b16c6afe7e0fafb678603e2b242cd.jpeg
 

IMG_3793.thumb.jpeg.450ad51e648b80fc0253ed247befa863.jpeg


 

After some research on what little info I can find online it seems these were only made for a year or two around 1971/2 which also means it’s a YOB. Bonus. The jazz version must have been more popular as that was made or sold for quite a few years before and after. 

  • Like 2
Link to comment
Share on other sites

  • Dazed changed the title to Hofner solid body basses + NBD

That's a nicer looking burst than most Fender basses, and I particularly like the matching burst on the back of the neck, which IMO is far more classy than a mis-matched natural neck. However the shape of the black in the body burst would suggest a fancy veneer over a plywood or butcher block body core - not that there's anything wrong with that. You'll need to neck and/or pick guard off to check the actual construction.

  • Like 2
Link to comment
Share on other sites

I do wonder if it’s a veneer, don’t think fotoflame was around back then? Seems too light to be solid maple to me. 
Scratchplate is coming off today to have a dig about. Feels like the thread on the pickup screws or the pickup itself is shot so can’t adjust the pickup height. 

Link to comment
Share on other sites

Scratch plate now off. Pickup threads are worn out so have to find some way to sort that. PTFE tape 🤔

 

IMG_3834.thumb.jpeg.534d4156155347e9e09389f24e202886.jpeg
 

IMG_3836.thumb.jpeg.7c8f05c2e22451b78f63cd2d02f6bfd2.jpeg
 

IMG_3837.thumb.jpeg.85380b47471aed5ace21f1758f44d994.jpeg
 

 

 

No pickup covers, routing in the plate doesn’t leave room for them either. 

 

IMG_3838.thumb.jpeg.001c9b1a81c71e6f7f0efed8f6e5ed58.jpeg

 

 

 

Still not sure about the body, could be a veneer. I don’t mind it’s light and looks good either way. Resonant too. 
 

IMG_3833.thumb.jpeg.ad9454ae1de28a86f10fa000ba71d802.jpeg
 

IMG_3829.thumb.jpeg.a35d4f7588c6ead3ff30d03752930928.jpeg
 

 


I’m going to need to swap these bits of the bridge, I’ve seen these saddles in other basses and never understood the point of them, they’re so big it’s impossible to get the string height remotely low. 

 

IMG_3831.thumb.jpeg.1fbfd65547f8138123eeb59a1114b468.jpeg


 

The neck isn’t in bad condition there’s a couple of small areas that look more damage than wear but nothing that affects playability. Frets aren’t too bad either. I like the accessible truss rod. 
 

IMG_3832.thumb.jpeg.1eb4fef2534af27b58e22241269794c1.jpeg

  • Like 2
Link to comment
Share on other sites

On 29/09/2023 at 17:07, TheGreek said:

Did you knab the 4 string P type that was on ebay recently?

I looked at that but I'm not playing my 4s so passed on it.

 Did you have anymore info on that ? I did a search on eBay but couldn’t see anything for the past 3 months or however far it goes back now. 

Edited by Dazed
Link to comment
Share on other sites

On 03/10/2023 at 09:21, miles'tone said:

Nice. Years ahead of Musicman with that trussrod adjustment function too!

 

Hayman used the same system at around the same time. Much better than taking the neck off to adjust it.

  • Like 2
Link to comment
Share on other sites

21 hours ago, TheGreek said:

So did I after I asked the question - not on eBay so I thought it must have been Gumtree. Couldn't find it there either.

 

It was black and IIRC the seller had bought it, not gelled and was selling.

The seller said she bought it locally on Facebook not that long before. 
Buying it was hard work. Had to message her every week or so, think she thought I was a scammer because I was prepared to travel 100+’miles for it. After a couple

of weeks she pulled the ad, then put it back up at over double the price…..

 

Someone must have give it some love over the years as the flatwounds sound quite fresh still that it came with. 

Link to comment
Share on other sites

21 hours ago, tauzero said:

 

Hayman used the same system at around the same time. Much better than taking the neck off to adjust it.

I’ve never understood why that became an accepted way of servicing an instrument. Either have an accessible cutout or do from the headstock. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...