bass_dinger Posted August 19, 2023 Share Posted August 19, 2023 I mentioned in my previous post that I was looking for an XB925, and found two in Hungary. I bought the intact one - here However, the seller had a second one, in bits but complete, apart from three items. A saddle for the low B string. A positioning screw for the tuner. The truss rod. The previous owner tells me that the two-piece neck had twisted, and he had removed the neck, and fretboard, and then the truss rod. Steam the neck, twisted it straight, dropped a length of hardwood in there, glued it in, and waited for the neck to reset into the shape of the hardwood insert. However, he tells me that it didn't reset, and instead twisted back to where it was. So, he offered me the bits - swamp Ash body, flame maple cap, two Bartolini pickups, and all the hardware, including what may be a Gotoh bridge and set of machine heads - for a low price. I said yes, and now have a project that is beyond my capabilities! However, I am pleased that I agreed to the second bass, if only to save it from being broken for parts. When I opened the case, it was like that moment when one finishes a box of Milk Tray chocolates, and you then realise there is a second layer to enjoy! Photos of my own to follow, but for now, I will share the seller's snaps. Quote Link to comment Share on other sites More sharing options...
bass_dinger Posted August 19, 2023 Author Share Posted August 19, 2023 The Flame Maple xb925. 1 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted August 19, 2023 Share Posted August 19, 2023 Oh good lord. would love to do it in that blue of the 928 and have the neck plain maple… wooof! 1 Quote Link to comment Share on other sites More sharing options...
bass_dinger Posted August 19, 2023 Author Share Posted August 19, 2023 @AndyTravis I like the idea of putting some colour on the body - more than putting some Danish oil on it, which was my original plan. As for the neck, I have three options. 1. Buy a twin truss rod, get a friend to route the wooden centre block out, and rebuild the neck myself. 2. Get a local luthier to build a neck for me , at around £1,000. 3. Go to the person in America who designed the XB series. He still makes custom basses, and has the exact specifications of the original necks. He offered to make a new neck for $400. I was concerned about CITES certification if I had a rosewood fretboard. A maple fretboard may not cause an issue, however. I was also wondering whether to make this one into a fretless bass. Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted August 19, 2023 Share Posted August 19, 2023 I’d speak to our very own @Andyjr1515 (or @Jabba_the_gut - or any of our amazing basschat luthiers) to see if they can make you a 1:1 copy of the neck - and add a Washburn decal from Rothko and Frost. if you ever sell, include the original neck so you’re not hoodwinking anyone with the decal? looks a lovely body. very jealous Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted August 19, 2023 Share Posted August 19, 2023 But…original luthier, $400… get someone good for body finish though… Quote Link to comment Share on other sites More sharing options...
itu Posted August 20, 2023 Share Posted August 20, 2023 7 hours ago, bass_dinger said: I was concerned about CITES certification if I had a rosewood fretboard. A maple fretboard may not cause an issue, however. This was an issue few years back. My understanding of the current situation is that an instrument with an ordinary rosewood is not under CITES. Of course, if you try to use some rare, CITES controlled wood, that's another story. Papers do no harm, but the super strict times should be gone. A much bigger issue is furniture. Many exotic woods are used to tables and chairs, and it seems that their market is in the far east. One tree gives hundreds of fretboards, while a big table, well, you do the maths. 1 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted August 20, 2023 Share Posted August 20, 2023 9 hours ago, bass_dinger said: 1. Buy a twin truss rod, get a friend to route the wooden centre block out, and rebuild the neck myself. 2. Get a local luthier to build a neck for me , at around £1,000. 3. Go to the person in America who designed the XB series. He still makes custom basses, and has the exact specifications of the original necks. He offered to make a new neck for $400. Yes - as @itu points out above, a CITES exemption came through at the end of 2019 in terms of most commonly used species of rosewood used in guitars, including parts and accessories. Also, there are plenty of dark wood alternatives that most luthiers can use. $400 for a neck made by the guy who designed it - grab it. It generally costs me well over $200 just for the wood! Oh - and two truss rods won't sort a 'naturally twisted' neck. The only thing worth trying would be planing the joining face flat and straight - but, as you can imagine, that has it's own challenges and consequences And the third option - £1000 to make a neck??? Really??? Did he/she have a royal 'By Appointment to...' crest? 1 Quote Link to comment Share on other sites More sharing options...
bass_dinger Posted August 20, 2023 Author Share Posted August 20, 2023 3 hours ago, Andyjr1515 said: And the third option - £1000 to make a neck??? Really??? Did he/she have a royal 'By Appointment to...' crest? @Andyjr1515, that's the same luthier that quoted the same price for fixing the truss rod on my green XB500, that you fixed for me. Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted August 20, 2023 Share Posted August 20, 2023 2 hours ago, bass_dinger said: @Andyjr1515, that's the same luthier that quoted the same price for fixing the truss rod on my green XB500, that you fixed for me. Goodness... Well - I 'spose no harm in asking Quote Link to comment Share on other sites More sharing options...
Richard R Posted August 20, 2023 Share Posted August 20, 2023 18 hours ago, bass_dinger said: Go to the person in America who designed the XB series. He still makes custom basses, and has the exact specifications of the original necks. He offered to make a new neck for $400. This, quick, before he changes his mind! Quote Link to comment Share on other sites More sharing options...
bass_dinger Posted August 20, 2023 Author Share Posted August 20, 2023 1 hour ago, Richard R said: This, quick, before he changes his mind! Had I asked him 4 months ago, he actually had a suitable neck in stock, that had been hanging around, unsold. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.