Woodinblack Posted April 21 Posted April 21 Any idea why the VIP is €50 more than the normal case? Quote
Quatschmacher Posted April 21 Author Posted April 21 6 minutes ago, Woodinblack said: Any idea why the VIP is €50 more than the normal case? Yes, it cost extra to develop and is a smaller run so unit price is higher than the regular which has been produced en masse and was designed 10 years ago. Quote
Quatschmacher Posted May 9 Author Posted May 9 4 minutes ago, itu said: Now what's that?! Kool! Have you been off-world? https://www.pandamidi.com/store/future-impact-vip 1 Quote
Quatschmacher Posted May 15 Author Posted May 15 (edited) A nice all-FI4 feature. Edited May 15 by Quatschmacher Quote
Quatschmacher Posted May 26 Author Posted May 26 It’s been brought to my attention that there’s a bug in the “convert folder of prg/pr3 programs to pr4” function. Until it is fixed, I’d suggest either loading older patches as normal via the manager as they get converted automatically when they get written to the pedal. If you need to do any bulk conversions, load 99 older patches into the manager and then use the “save” function within the manager to save the files to your computer and they’ll be converted at the point of saving. 2 Quote
Quatschmacher Posted May 27 Author Posted May 27 (edited) V4.12 should be available to download imminently. It fixes a bug with MIDI thru where PC messages on other channels other than the FI4’s own weren’t being forwarded. It also adds a feature which is mainly for the VIP version - it suppresses the EDIT dial’s function when the on/off footswitch is pressed, thus preventing accidental bank changes when engaging/disengaging the pedal. I’ve uploaded it to my google drive for now so users can access it there until it’s live on the panda site: https://drive.google.com/drive/folders/1j5siBd_MoGfvHDYcISal42VjkFAdwp71 Edited May 27 by Quatschmacher 2 Quote
Quatschmacher Posted 22 hours ago Author Posted 22 hours ago (edited) Finally been sent my FI4 VIP unit. Lovely. Obviously thanks are due to @GisserD who designed his own aftermarket mini housing years ago which undoubtedly created the groundswell for this official Panda one to eventually happen. Edited 21 hours ago by Quatschmacher 7 Quote
Quatschmacher Posted 12 hours ago Author Posted 12 hours ago Front shots for folks asking about the clearance between the footswitch and the encoder: 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.