Fender Preamp, Warwick Tuning Peg, *Sold, or now on Ebay* £12345 Marden, Kent

[WarPig]

Fender Elite Jazz Preamp

I'm more of a Dimarzio VVT jazz bassist. 18v Controls: Master Volume, Pan Pot (Pickup Selector), Treble Boost/Cut, Midrange Boost/Cut, Bass Boost/Cut, Active/Passive Mini Toggle. Switching: 2-Way Mini Toggle Switch for Active/Passive Mode. In Passive Mode, Only The Volume, Pan and Passive Tone Controls Function. In Active Mode, All Controls Function. Includes battery cables and jack socket. You can solder the wires onto the connectors. The PCB is 18cm long and the depth from under the bell plate is 27mm, it's for a side-jack mounted bass. On Ebay Now

MEC BEC3 3-band complete system

Taken out from Warwick Thumb NT bass. It is 3-knobs (incl. 2 stacked) Master Volume/Balance stacked, Bass/Treble stacked, Mids. There is a push-pull switch for true passive mode. Black knurled knobs included. Not long ago imported from @koval123 but I don't think I'll get round to fitting it. £60 Posted *SOLD*

Warwick Bass Tuning Peg

Removed from my Thumb.....bass when I installed a D-tuner. So it's from the top/bass side. W marked and screw included. £5 Posted

Zebra-style wood Telecaster body

Bought from eBay for a project I never got any further with. It's a one-piece body, 25.5" Scale, 56mm wide neck pocket. Routed for neck, controls and pick ups. It's a pretty bit of wood. £45 Posted *SOLD*

 

 

Edited January 29, 2021 by WarPig

[therealting]

What’s the weight of the Tele body?

[WarPig]

11 minutes ago, therealting said:

What’s the weight of the Tele body?

Good question, I'll weigh it in the morning and add it to the post.

[Beedster]

Hi mate, am I missing something, can't see how the Jazz circuit would fit in a standard jazz control cavity?

[WarPig]

34 minutes ago, Beedster said:

Hi mate, am I missing something, can't see how the Jazz circuit would fit in a standard jazz control cavity?

Good point, will amend now and add measurements tomorrow.

Edited January 28, 2021 by WarPig