Jump to content
Chris85

On Hold **Warwick Streamer made in Germany***
£1880
Germany

Recommended Posts

Hi, 

for sale is a special piece of art from Germany. A Warwick Streamer 5 in very good condition. It has the typical Warwick-sound. Very even over the whole fretboard and a tight and punchy low b. Craftmanship is extraordinay good. 
Retail price was 3799€ - now are the prices for german made warwicks much higher.
It comes with a massive Warwick rockcase and new daddario 165s strings.

I may consider trades or part exchange.

 

Big Price Drop: 1550£

 

 

  • Warwick Machine heads
  • Just a Nut III Brass
  • 34″ scale
  • 24 Jumbo Brass frets
  • Maple fingerboard 
  • Blackwood block inlays
  • Blackwood neck with Maple stripes
  • 2/3 Maple with 1/3 plain Blackwood top body
  • Finish: Natural Oil
  • Passive Seymour Duncan Soapbar’s SSB-5n (Neck) and SSB-5b (Bridge) Pickups
  • Seymour Duncan 3-way with slap contour presets electronics
  • Dome speed control knobs
  • Warwick 2-pieces bridge
  • Warwick security locks
  • Chrome hardware color, maple tuning pegs 
  • RockCase flight case

 

 

 

 

 

 

 

 

 

 

 

 

 

Edited by Chris85
  • Like 5

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By SaimoN
      For sale my Warwick Thumb BO 5 bass.
      Made in 2003, body & neck ovangkol, wenge fingerboard, 2-way MEC preamp & MEC pickups.
      Bass is in great condition for it's years. Electronics are working fine, it's fully adjustable (no trussrod or bridge problems), frets show no signs of wear. Nut changed to Just-A-Nut III, new tailpiece installed (can fit thicker B string now).
      Bass sounds great, has lots of that famous Warwick growl, and is really "in yer face" punchy in the mix. Neck isn't that thick (at least compared to my '08 'Vette $$) and it's more of a C shape than a D shape really. You can set your action really low. Either way, it's really comfy to play. It has no neckdive & isn't much of a neck heavy.
      The price is £1250/€1400 - including case, insured shipment within the EU, and PayPal costs (I can do this money transfer only).
      Sound samples:
      https://youtu.be/4etbpK805t8
      https://youtu.be/R8Nszum5Was
      https://youtu.be/rUDZm9-KWv0
      https://youtu.be/t-pTqTUhU8I
      https://youtu.be/rM3YOqgLz-I
      https://youtu.be/UoGz8JbMfEE
       
       
       
       
       
       
       
       
       








    • By gorandelac
      Hi all, I'm selling my Alembic MK Signature Deluxe with Coco Bolo top, so here is little about the bass.
      Bass has no scratch, no belt buckle scratch, it's almost as brand new, as you can see from pics.
      Scale: 34"
      String spacing: 19 mm
      Fingerboard: Ebony with abalone
      Top: coco Bolo
      Back: Coco Bolo
      Body: Mahogany with maple and purplehearth as accent woods
      Neck: Maple with Purple Hearth stringers
      Finish: clean gloss with satin finish on the neck
      weight: 5.7 kg (with 5 9v batteries that goes into the bass, 4x for LED)
      Electronics: volume, pan, 2x filters, 2x q switches, 1x LED on/off, 1/4" mono output.
      LEDs are amber and red (check pictures)
      Bass was done in 2015, so it has 2+3 machine heads.
      Bass has original case, papers, everything. New one like this is 17.600 dollars, you can check here on Alembic site my bass is Sig Dlx Coco Bolo.
      This is I think only signature bass in EU that is available with this price. For any questions you can contact me. Here are some pic that justify the whole thing, other pics you can see on my dropbox:
      https://www.dropbox.com/sh/huwja8inhg3pt5e/AAAZ_-yhsAWuU_Zi-cx5C75fa?dl=0
       
      Price says 6000 5600 pounds but it's actually 6500 6200 euros, just conversion is different every day.
       
      Also check my feedback page:
       
       











       
       
    • By Acebassmusic
      I've reduced my Ritter down to £4,400 Trade offers welcome.

      Here’s something you don’t see up for sale everyday……a Ritter! Not only that, it’s a 10th Anniversary Limited Edition from 2007……and its number 1 of 10.  I have taken great care of this bass and it in mint condition only having had light use. I am the second owner and bought the bass in July 2008. It comes with the original certificate of authenticity, truss rod tools and lightweight Ritter case as shown in one of the links below. I'm open to partial / full trades. Lets see what ya' got.

      The Roya has a one piece quilted redwood top, one piece flamed maple back. The flame maple back is by far the most 3d piece of flamed maple I've seen. Flamed maple neck with an ebony fretboard and a 24K solid gold sword inlay at the 12th fret. The electronics are active / passive.

      Shape: Roya
      Number of Strings: 5
      Scale 35" (889mm)
      Adjustable 17 to 19mm string spacing at the bridge
      Hardware : Gold
      Body-Wood: Flamed Maple - One Piece
      Body-Top: Quilted Redwood - One Piece
      Body-Finish: Transparent High Gloss
      Neck-Wood: Maple Construction Bolt on 3-Piece
      Neck-Finish: Transparent High Gloss
      Fingerboard: Ebony
      Electronics: RITTER MASTER Parametric
      Pickup Bridge position: RITTER MASTER Triple/Slim with ebony cover
      Pickup Neck position: RITTER MASTER Triple/Slim with ebony cover
      Weight 4,2 ( 9.24 lbs)
      Bridge / String Attachment: Ritter 3D / B1 String Attachment
      Tuners: RITTER BT - Custom made by Gotoh
      Nut: Bone
      Strap Buttons: Schaller Security Locks
      Special Features: 10th Anniversary 24K Gold Inlay Limited Edition Nr. 1/10

      Link to my Google photos album : https://goo.gl/photo...qNUK1UxboVm4sy7
      Ritter 10th Anniversary Bass Page : https://ritter-instr...dition-10th.php
      Ritter 10th Anniversary Bass Page showing my bass and me (hopefully that won’t put you off!) : https://ritter-instruments.com/instrument.php?id=0615
      Similar Ritter 10th Anniversary Bass on Reverb website : https://reverb.com/i...maple-bass-2006

       
    • By HumblePie
      Superb bass, custom made in Markneukirchen.
       I got this bass in a trade and enjoyed it very much. Due to a permanent switch to fretless bass, I am selling this very special instrument.
      Mint condition.
      Half the price of a new one (£6,000/6,500).
      https://shop.warwick.de/en/instruments/electric-basses/warwick-masterbuilt/thumb/thumb-nt/20511/warwick-masterbuilt-thumb-nt-6-string-natural-oil-finish
      The specs:
      Six strings Schaller Machine Heads with wooden knobs Just-A-Nut III Brass Neck Wood: Wenge neck, 5 laminates Fretboard: Tigerstripe Ebony fingerboard Fluorescent Side Dots Fingerboard Radius: 26" Scale length: 34"  Width Nut: 45,0 mm / 1.8" - Width 12th fret: 60,8 mm / 2.4" - Width 24th fret: 69,11 mm / 2.7" Fret quantity material and size 26 Jumbo Bronze (extra hard) frets (width: 2.9 mm / height: 1.3 mm) - Frets: IFT - Invisible Fretwork Technology Body Shape: Curved Body Shape Bodywood (Topwood / Backwood): Bubinga Pommelé body Pickups Active EMG soapbar H/H Electronics: Active MEC 3-way electronics Pot layout: Volume & Balance stacked P/P for active/passive / Mid / Treble & Bass stacked Bridge system: 2-piece solid Brass Warwick Bridge Strap system: Warwick security locks Construction: Hidden neck High Polish Finish Hardware colour: Chrome Weight: 5,6 kg Included accessories: Warwick User Kit including hex key tools and Cleaning cloth Certificate: Individually issued certificate of authenticity Original and super solid flightcase.  
×
×
  • Create New...