Recently Browsing 0 members
No registered users viewing this page.
"all I nil" - work in progress bass/drums/vocals psychedelic progressive stoner rock/metal solo project, and something about my 5 string Ibanez Mikro Bass! (Now with some actual sound clips!!!)By Baloney Balderdash
Here is the Ibanez GSRM25 5 string Mikro that I mentioned in the "Show off you short scales" thread, where I posted a picture of and talked about my main 4 string Ibanez Mikro Bass:
It got a poplar body and a maple neck with a jatoba fretboard, and I also did some visual mods on it, among other added a silver lotus flower decal with an OM sign in the middle and painted the pickup covers grey, the 2 stock J pickups I wired in series directly to the output jack socket, bypassing the pots, which means that the knobs and the switch are just there for the sake of being decorative.
To be honest, in my opinion, as the pickups were wired from stock they sounded like crap, no matter how I adjusted them, they sounded like a caricature of the famous Jazz Bass burp, a really over emphasized burp there was no way of getting rid of, on top of them just sounding somewhat underwhelming and anemic, except, as I found out by wiring the pickups in series, which not only got rid of the ludicrous bad sounding burping sound entirely, but actually also made them capable of a genuine great full sounding tone overall.
Otherwise this bass was perfect from factory, and I mean absolutely perfect, just to mention one example I would be able to get ridiculously low action if I wanted to without any fret buzz whatsoever, the frets are just dead on perfectly leveled.
On the particular picture above it was actually strung with the 5 lightest strings of a 6 string D'Addario set, gauge .100 to .032, but I later put on the Ernie Ball set meant for Bass VI type instruments, using the 5 lowest strings, gauge .090 to .030, and tuned it F# to D, as in F# standard tuning, 2 half steps above regular 4 string bass E standard tuning, threading the strings through the cut off ball ends of some old bass strings I had, to be able to fit it on the bass's bridge, since those Ernie Ball strings have guitar sized ball ends.
I intend to use it for some songs in the making for a sort of progressive psychedelic stoner rock/metal solo project I am working on called "all I nil", which is supposed to predominantly consist of just bass, programmed drums/percussion and vocals, with a few extra instruments added more sparingly mostly for flavor, like for instance glockenspiel, programmed flutes, cello, violin, piano and synth.
I am still working on my setup/rig for this thing, but one thing that is certain is that an octave up effect will be added to my bass signal, sometimes with separate effects used respectively for the octave up signal and the regular bass signal, sort of giving an effect similar to a 10 string octave bass with pairs of bass and octave strings, just with the advantage I get from doing it this way of being able to process the bass and octave up signal separately.
For this I am using a TC Electronic Sub 'n' Up Mini, which seems to actually work really well for this, as good as flawless and super fast tracking, and in my opinion being capable of sounding more natural/realistic than for instance the EHX POG pedals, which tend to have a slight somewhat organ or synth like quality to the octave up signal.
Pitching your signal up a whole octave is always going to sound somewhat artificial though, no matter how well it is processed, but it has actually still worked surprisingly well and sounded reasonable naturally in my preliminary test runs of this idea, and adds a lot of extra sonic space and flavor, exactly as will be needed for this project, where my bass is going to be the main, and most of the time only, instrument that carries the melodic content of the tracks (well beside the vocals of course).
Other than that heavy thick distortion with fuzz like qualities mixed with a bit of clean signal, and secondarily chorus, flanger and phaser, will see a lot of use for this project.
Just in the process of figuring out which kind of setup will give me the best results for what I have in mind currently, and so far only got fair deal of the basic bass parts down so far (I believe I more or less got the bass parts and final form for 4 to 5 tracks at the moment), then when I got my setup perfected the actual recordings can start, then the programming of the drum/percussion parts and eventual additional flavor instruments comes, and eventually writing the lyrics and getting the vocals laid down.
All in all I think at least another 6 months, very likely even more, before I got an EP, or less likely a full length album, ready for release on Bandcamp and various online digital music streaming services and shops, perhaps even a self released physical version, but we'll see about that when it eventually that time comes.
Here's a short sound sample of a preliminary distortion tone, using some riffs I have been working on for this project (notice that if you are not logged into Dropbox a box might pop up when you click the link, encouraging you to sign up, blocking for the audio player, in that case you just click somewhere outside that box and it will disappear, making the audio player accessible):
https://www.dropbox.com/s/8m02vfjf7dv5ojx/all I nil - New Distortion Sample.mp3?dl=0
And here's a couple of older very rough takes of 2 songs in the making, respectively with the working titles "3rd Eye of Hypnos" and "In Orbit", playing both of them in a bit faster tempo than was is really intended ("3rd Eye of Hypnos" since this recording having had a much melodically expanded variation of the intro and outro riff added) :
https://www.dropbox.com/s/3u06k5cct75coi9/all I nil - 3rd Eye of Hypnos.mp3?dl=0
https://www.dropbox.com/s/7f5wbstq5wh318w/all I nil - In Orbit (Take 2 F%23).mp3?dl=0
Please note that the above linked to recordings are fairly old, recorded directly and not with a miked up amp or any form of amp emulator added or other post production done to them, as well as this was a preliminary temporary setup, and as a result the tone/sound of these recordings are admittedly pretty crappy, and pretty seriously far from how it is actually eventually going to sound after I have managed to find just the right pedals for the effects I intend to utilize, just the right setup for these, recorded with a properly miked up amp, and having been edited, mixed and mastered properly, it is not even remotely close to how it eventually is going to sound live either, as it, already at this point, where I haven't actually found just the right setup that I am 100% satisfied with, sounds way way better than these recordings, but thought those crappy sound snips might still be able to give you at least some idea of what I am heading at with this project.
Breedlove Studio in mint condition. - Price drop - £500 inc UK delivery.
Happy to post overseas at buyers expense.
Studio Bass Specifications:
Solid Wood Top-Solid Sitka spruce
Tuners Hardware-Bass, chrome
Lower Bout Width-17"
Waist Width-9 5/8"
Upper Bout Width-11 3/8"
String Gauge-D'Addario EXPPBB170
Anazing acoustic. Barely played due to injury.
Any questions, please ask.
Also interested in trades for a short scale electric.
"Tic-tac bass" is a method of playing, in which a muted baritone guitar doubles the part played by the bass guitar or double bass. The method is commonly used in country music"
Emily Sings is experimental and new for me and I ended up revisiting an old bass technique. I needed to as with sparse playing and no percussion it does the job of the rhythm section well. It's a fretless with a bass Vi picking out the beat. There is similar treatment in the other tracks. Doing your own thing and being able to experiment is fantastic. I hope that you like it.
Emily Sings is the first of several planned singles and videos from the experimental new album “Blue and Hazy”, which is scheduled for release late in 2020. I hope you enjoy it.
Recording took longer than I expected due to a number of errr challenges. There is only vocals, acoustic and bass guitars on this track but without drums the guitar and bass are also the rhythm section and had to be spot on to get the sound I wanted.
I envisaged using double bass but in practice that didn’t have enough sustain and notes faded out too quickly. Pete suggested trying his Ibanez SRH fretless bass. This sorted the tone and sustain but it lacked high end and bite. Additional bass was added with a Eastwood Sidejack Vi, a 6 string bass that was played over the top in tic-tac style with a pick.
The guitar signal was split into two and recorded as both an acoustic and effect signal. These were then blended back together for a tighter sound. That also allowed sume subtle fading in and out of the reverb. I used a favourite Taylor (mahogany) guitar, with a Strymon Big Sky reverb pedal. It generates all of the choral, background swells and is also used on the solos.
Vocals were tweaked by Charlie Lintern in the studio. Some lines were changed later and I found that my voice had changed slightly, as I’d had corona virus. A permanent change I’m told, not that it sounds better or worse, just slightly different.
Eddie Mole: Guitars, vocals and bass
Peter Brownbridge: fretless bass
Sound Engineer: Charlie Lintern
Recorded at 13 sound studios at Weston super Mare