Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

17/03/1964 a day of birth Precision bass build


rubis

Recommended Posts

Thats very kind of you Bridgehouse

I intended to use an old pickguard, bridge cover and neck plate to ‘mask off’ areas that would not get UV yellowing and then more clear coat over the top.

Its the first time I’ve used nitro and it does seem to ‘melt’ into the previous coats a bit, so that may help it look more natural

Link to comment
Share on other sites

Yes it will melt in - and it actually does - it doesn't layer at all - they melt together.

Go for a very light amber tint - not a full on amber tint or it will look like algae!

I drizzled mine on from a good 20" or so, and then put a few specific spots on for effect.

Masking off will give you a good effect - I just masked off my pick guard and lightly attached it.

It wasn't difficult at all, and it does create the effect you are after - quick coat of clear after and you are done. I did satin clear to give it a bit more authenticity. Of course, then I lacquer checked it - which is a totally new form of madness and torture all of it's own. 3 months curing the nitro and then in and out the freezer like a mad thing!

Link to comment
Share on other sites

@rubis - managed to find the other shots I was looking for just now - these are outdoor shots on the day I actually sprayed it. First one is the daphne blue as is, and then the overspray so you can see how it looks prior to ageing, relicing and so forth!

yBLifr1.jpg

l9Sg6nX.jpg

1Vom3HE.jpg

 

And here are some outdoor shots after the relic process - it's a heavy relic as I was going for a proper battered look..

 

sEsyWmE.jpg

yPMvkDN.jpg

gruIkAv.jpg

1NZqyh6.jpg

 

Hope that helps - if you need any more help just give me a shout.

Edited by Bridgehouse
  • Like 2
Link to comment
Share on other sites

Just now, rubis said:

That’s awesome mate

It’s reassuring to know I was on the right track with the method, thank you kindly for your help

 

No problem at all! Good luck with it - it's pretty scary shooting that first bit of tint over a pristine daphne blue finish!

Link to comment
Share on other sites

  • 2 weeks later...

Things are at a bit of a hiatus at the moment with the body ageing, I have a Spitfire pickguard on it's way, and until it gets here I can't do the yellowing process. I tried using a pickguard from my son's Westfield p bass, but it's not a very good fit on this body, so I might as well be patient and wait a while so that the 'un-yellowed' bit under the pickguard matches the shape of the actual guard properly. I'm afraid I might end up with a bit showing which doesn't look properly sunburned, like a white tan line! 

I've been online shopping for a few bits and bobs, got some Durham's water putty, which apparently is great for the clay dot markers, a 7.25" radius block and a  a period correct truss rod nut.

I also found this clip on youtube, which may be the simplest way of doing a veneer fingerboard 

 

Link to comment
Share on other sites

I'm contemplating how to go about getting an aluminium shield that goes underneath it. 

you can get them in USA at reasonable cost, but I can't find a UK supplier. 

I will have to wait and see if I get stuck-on for import taxes on the pickguard, it seems a lottery whether you do or don't, and if I could I would rather source parts here. 

I could always make the aluminium guard, I used to be a blacksmith years ago! 

I think they are 14 gauge aluminium sheet, and I will have a template to use!

  • Like 1
Link to comment
Share on other sites

Thank you Andy 

A quick update just to show I haven't been completely inactive, I've done some shopping for some more parts while waiting for the Spitfire guard to arrive (and clear customs.....ouch 🤑)

DSC02628.JPG

Link to comment
Share on other sites

The pickguard has arrived, and very nice it is too. 

Nice touch to sign and date it on the back 

 

DSC02626.JPG

DSC02624.JPG                              

 

The second picture shows it on the as yet, un-yellowed body, so it looks a little bit odd, but it's a nice fit and when compared to the black one from my son's Westfield copy, there's quite a bit of difference in fit.

DSC02625.JPG                                 

 

I'm so glad I waited rather than use the black one to create an un-yellowed patch, as the different profile would have caused a problem

Edited by rubis
  • Like 2
Link to comment
Share on other sites

I've done a bit of yellowing on it now, it was great fun once I got going, in fact quite difficult to hold back and not go over the top with it!

Rick and Bridgehouse were dead right, this is addictive!

I fitted parts onto the body to provide natural masking, leaving the un-aged sonic blue underneath, and didn't screw the scratchplate down tightly so that I wasn't left with a hard line, as it would be (and in fact is) warped with age and so there would be a softer line between the yellowing and the clean colour. I hope this looks more realistic. I know it's only really visible when the scratchplate is removed, but I might as well do it if I can. I did a bit with the bridge cover on and then removed it and did a bit more, to try to make it look like the cover has been on and off 'over the years' 

I will tweak it a bit to rub back a little bit of the yellowing on areas that, from what I've seen in the dozens of photo's I have looked at, seem not to yellow. I can only imagine that this is down to some sort of continual wear pattern from contact against your body whilst playing. 

I mean on areas such as the forearm contour, the belly contour and the lower curve where it rests on your leg when you are seated, but again, I need to remind myself……..less is more!

sorry if the photos don't show the colours or detail up very well, but the natural light was fading and i had to take them indoors. 

I'll take more photos when the clear coat goes on.

 

DSC02630.JPG

DSC02635.JPG

DSC02636.JPG

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Whilst waiting for the lacquer to harden a bit I have got some more hardware to finish off the body.

Strap buttons, neck plate and I was lucky enough to find an aluminium pickguard shield on Ebay Germany which has saved on yet more import taxes as they don't seem to be available in the UK 

DSC02855.thumb.JPG.ef5e0e63a54d37808980a8a3cd1b0efd.JPG

  • Like 1
Link to comment
Share on other sites

Once again however I need the advice and help of those lucky enough to have or had a mid 60's p bass.

Before I 'age' the neck plate I want to add a faux serial number, and instead of beginning L..... I want to use just numbers to read 170364. 

I have seen metal number/letter stamp sets online, and they come in 3mm and 4mm sized stamps, but can someone measure the actual size of the numbers for me please 

 

s-l1605.jpg

Link to comment
Share on other sites

Next question is about the aluminium pickguard shield. 

The red lettering on the back appears to say 'ALCLAD' but I can't make out what the rest of it says 

 

Can anyone help please? 

Once again thanks in advance for any help, advice, opinions or criticisms 

 

 

avbzcbgzey1igznqanly.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...