JJW Posted January 20, 2015 Share Posted January 20, 2015 Hi everyone, I am making a Jerry Only bass, the bass has a double p-bass pickup (you can see in the link). I am not to sure on how to do the electricals. What would be a good way to put in the double p bass pickups and what sort of price would I be looking at? Thanks Josh http://becuo.com/jerry-only-bass Quote Link to comment Share on other sites More sharing options...
joeystrange Posted January 20, 2015 Share Posted January 20, 2015 If you want to do it like Jerry's then just wire them both to the jack. The price depends on what pickups you want, I guess. Jerry's sound is all high mids and almost nothing else. I don't know which pickups will get you near that sound though. Sorry. Quote Link to comment Share on other sites More sharing options...
JJW Posted January 20, 2015 Author Share Posted January 20, 2015 Jerry uses lots of different pickups, so i am not to bothered about what pickups I use. What do you mean wire them straight into the jack, how do I do that? Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 20, 2015 Share Posted January 20, 2015 [quote name='JJW' timestamp='1421782168' post='2664999'] Jerry uses lots of different pickups, so i am not to bothered about what pickups I use. What do you mean wire them straight into the jack, how do I do that? [/quote] The 'hot' wire from the p/up goes to the jack tip. The other wire goes to the jack sleeve (earth...). Repeat for other p/up; job done. Quote Link to comment Share on other sites More sharing options...
joeystrange Posted January 20, 2015 Share Posted January 20, 2015 [quote name='Dad3353' timestamp='1421785745' post='2665058'] The 'hot' wire from the p/up goes to the jack tip. The other wire goes to the jack sleeve (earth...). Repeat for other p/up; job done. [/quote] Yes, this. There are no volume or tone controls on Jerry's basses. Quote Link to comment Share on other sites More sharing options...
JJW Posted January 20, 2015 Author Share Posted January 20, 2015 Last couple of questions how do I know which wire is the hot wire and how do I know which side of the jack? Also would It be fine if I just buy 2 sets of p bass pickups? Thanks Quote Link to comment Share on other sites More sharing options...
gelfin Posted January 20, 2015 Share Posted January 20, 2015 (edited) I have bought these from this ebay shop and think they are great value for money. They come with a wiring diagram for a standard P bass and indicate the colour coding for hot and ground. [url="http://www.ebay.co.uk/itm/231141292709?_trksid=p2059210.m2749.l2648&ssPageName=STRK%3AMEBIDX%3AIT"]http://www.ebay.co.u...K%3AMEBIDX%3AIT[/url] Just connect both pups to the jack socket and don't forget to add a ground from the bridge to the ground Side of jack socket. Edited January 20, 2015 by gelfin Quote Link to comment Share on other sites More sharing options...
JJW Posted January 20, 2015 Author Share Posted January 20, 2015 They look good, thanks for the link. I have just seen some EMG pickups would I be fine if I had one set of those and one set from the link? Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 20, 2015 Share Posted January 20, 2015 [quote name='JJW' timestamp='1421789244' post='2665128'] Last couple of questions how do I know which wire is the hot wire and how do I know which side of the jack? Also would It be fine if I just buy 2 sets of p bass pickups? Thanks [/quote] It sounds to me as if you're a beginner in this field (nowt wrong with that; we all started off as such...). I would suggest finding someone close by willing to show you the 101 soldering/electrical ropes and guide you through this. It's not rocker surgery, but, with all the different p/up and jack models around, it's difficult to give precise help. Publish your location, perhaps (either here or in your Profile...), and maybe some photos of the p/ups and jack would be useful..? Some kind BCer may be close enough to lend a hand. [size=4] [/size] Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 20, 2015 Share Posted January 20, 2015 [quote name='JJW' timestamp='1421790363' post='2665145'] They look good, thanks for the link. I have just seen some EMG pickups would I be fine if I had one set of those and one set from the link? [/quote] Why would you want two different p/up makes..? Beware, too; many EMG p/ups are active, and require battery power to work. Quote Link to comment Share on other sites More sharing options...
gelfin Posted January 20, 2015 Share Posted January 20, 2015 I think Dad has hit the proverbial nail squarly on the head here. Go for the cheapies as it's your first go at this. You can always change them later if the project is successful. Quote Link to comment Share on other sites More sharing options...
JJW Posted January 20, 2015 Author Share Posted January 20, 2015 I am fairly new to the wiring part of this. The reason I mentioned the EMG pickups is because they are a good price and they are not the battery ones. I have made a couple of basses in the past but I had someone else sort out the wiring for me. Quote Link to comment Share on other sites More sharing options...
joeystrange Posted January 20, 2015 Share Posted January 20, 2015 [quote name='JJW' timestamp='1421791091' post='2665161'] I have made a couple of basses in the past but I had someone else sort out the wiring for me. [/quote] Getting someone to help/show you is a good idea. Especially with the wiring for this bass being so simple (you really can't get any simpler than this!) it'd be a great place for you to start. Quote Link to comment Share on other sites More sharing options...
gelfin Posted January 20, 2015 Share Posted January 20, 2015 (edited) Simples [url="http://s970.photobucket.com/user/gelfin5959/media/Pbasswires_zps83abaeed.jpg.html"][URL=http://s970.photobucket.com/user/gelfin5959/media/Pbasswiring_zpseaeadf52.jpg.html][IMG]http://i970.photobucket.com/albums/ae181/gelfin5959/Pbasswiring_zpseaeadf52.jpg[/IMG][/URL][/url] Edited January 20, 2015 by gelfin Quote Link to comment Share on other sites More sharing options...
JJW Posted January 20, 2015 Author Share Posted January 20, 2015 I know getting someone to help me is good but th guy I knew moved away so I don't really have anyone to ask in person. Quote Link to comment Share on other sites More sharing options...
gelfin Posted January 20, 2015 Share Posted January 20, 2015 Tell us where you are, I'm sure we could find someone near that could help. Quote Link to comment Share on other sites More sharing options...
JJW Posted January 21, 2015 Author Share Posted January 21, 2015 I'm in North London. Quote Link to comment Share on other sites More sharing options...
cameltoe Posted January 21, 2015 Share Posted January 21, 2015 If someone can just send you a jack with the hot (white) and ground (black) wires already soldered on, you could just connect to your pickups with terminal blocks, the method our KiOgon uses. This will allow you to swap p'ups too if you needed. I would send you this, but I used the last of my parts creating my bitsa project which incidentally, used a Precision pickup wired straight to the output jack. Quote Link to comment Share on other sites More sharing options...
gelfin Posted January 21, 2015 Share Posted January 21, 2015 I'm up for that. PM me your address and I will get it done for you. Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 21, 2015 Share Posted January 21, 2015 [quote name='JJW' timestamp='1421869846' post='2666087'] I'm in North London. [/quote] Let's try this... Quote Link to comment Share on other sites More sharing options...
JJW Posted January 21, 2015 Author Share Posted January 21, 2015 kiOGon has pm'd me about the electronics I need but thanks! Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted January 21, 2015 Share Posted January 21, 2015 [sharedmedia=core:attachments:167485] Quote Link to comment Share on other sites More sharing options...
bigd1 Posted January 23, 2015 Share Posted January 23, 2015 Can I just ask as it's killing me to know, who is Jerry? Quote Link to comment Share on other sites More sharing options...
BigRedX Posted January 23, 2015 Share Posted January 23, 2015 [url=http://en.wikipedia.org/wiki/Jerry_Only]Jerry Only[/url] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.