Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

de afwerking mk3-6 - A build diary.


blablas
 Share

Recommended Posts

[IMG]http://i.imgur.com/ZXAkuNf.jpg[/IMG]
All the bracing and blocks are glued to the back.

[IMG]http://i.imgur.com/Vs9tVWT.jpg[/IMG]
Finished the access cover transition to the body and mounted it.

Next step, sanding flat the back, roughing up the front side and gluing on the top.

Edited by blablas
Link to comment
Share on other sites


Decided to give the final straight edge of the access cover a binding as well.


Glued a reinforcement rib on the inside of the top, also drilled the small holes in the top (and back) for the toothpicks to align the top when gluing. Edited by blablas
Link to comment
Share on other sites

At last after 1.5 weeks of preparing and gluing, today I've been happily busy with shaping the outside.

[IMG]http://i.imgur.com/Ut3ZuPa.jpg[/IMG]
Sanded the outer body contour, routed the radius on the edge of the body and and routed out the soundholes.

The top:
[IMG]http://i.imgur.com/73v0Zps.jpg[/IMG]

The back:
[IMG]http://i.imgur.com/aRF8rgo.jpg[/IMG]

Edited by blablas
Link to comment
Share on other sites


Decided on the position where the knobs and switches should come and drilled the holes for these.
Centered the holes for the single string bridge parts.


Rough cut the wood for the neck.
Wenge fingerboard, maple/wenge/maple/wenge/maple neck, merbau - with body matching walnut top - headstock. Edited by blablas
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...