BassAdder60

The ABM amps are difficult to improve on for a gigging musician They do the job very well

Rocked the ABM600 head this weekend running it with master volume at 12 o clock ( loudest I’ve had it ) playing another outside gig without PA support. For a change I used my Squier CV70’s PBass ( upgraded ) and it sounded really good. The two Ashdown ABM210H cabs doing a fine job

Used mine yesterday for a gig, superb During the break I unplugged both and put them back into amp and bass ready for second set. Very liberating being unattached to a cable

Ok folks Fender HiMass bridge fitted ( nice ) new mini Alpha pots fitted and new cap. New strings fitted and it’s sounding great with the Dimarzio pickup Pleased with it now and plays well too

Thanks 👍

Quick question about the Boss WL-20 wireless which I’ve recently purchased After use say 4hrs can you charge back up to full capacity or do you need to charge it from fully discharged ? I think the old Nicads had charging memory issues but I believe these are lithium batteries? Will it make any difference if I always charge it before a gig even if I haven’t used it for a week or two ??

No I don’t think so. I should of kept my RM800 as it may of been simpler matching the tone to my ABM600. Although with less EQ on the RM it was never quite the same The Legacy 800 is a great amp and has a distinct growl to its sound when pushed and it has basically a second channel ( drive ) which is foot switch operated and can be used as a minor volume lift or a drive tone ( very mild ) The ABM600 tube warmth and drive really makes it top dog I think and lots of EQ adjustments

Used at rehearsals ( loud ) and it sounds very good. Not far away from my ABM600 tone and is now the tone I need for my second amp Such a difference it makes using the contour switch and then boosting the low mids Unable to get that tone with only the Amp EQ rotary controls Good work GK Sounds amazing with a PBass

The stock PU in my player are very nice and does the job well I’ve put Dimarzio D122 in my Squier CV 70’s and they are very nice too, highly recommend them especially for rock

Used my new Boss WL-20 last night and I’m very impressed Strange thing I kept thinking / sensing I need to watch my lead under my feet only to see there was no lead !!! Years of playing with leads I guess ! Very liberating being able to move about more Sound was spot on

Were the electrics quiet on it ? Im modifying my CV70’s and it’s now a superb bass. As stock it was a buzz fest if you took your hands off the strings Better grounding and shielding and new PUPS has improved it no end.

My Player Series is whisper quiet and was from new. The CV was noisy with stock pickups and even more noticeable with the Dimarzio when fitted. Since the shielding job it’s now as quiet as my Player Series.

My Boss WL-20 just arrived and will be put through its paces tomorrow night Trying it at home so far I like it and the style of it ( far better than a strap pouch models in my opinion, was using Line 6 G30 ) Will be gigged this weekend 👍

My fairly new GK 800 head has been a challenge at times getting my ideal sound ( close to my ABM600) Although it’s my backup or smaller venue amp I still wanted to get a nicer tone from it and I came close to selling it but …., Ive learnt a very good tone feature that wasn’t obvious and not one I would normally choose at first. The Legend has a bass boost, contour and presence switch and on its own Contour is a bit like the ABM600 SHAPE smiley face pulled mids sound. I normally avoid this tone as without the mids it gets lost in the mix. However I’ve found a great sound where you run bass boost on and contour on but back off the bass control and boost the low mids and high mids. You cannot achieve the same tone just using the B, LM, HM, Treb controls ( trust me I tried ) The resulting sound is fuller, more depth yet still punchy and the mid honk sound has gone. It sounds perfect with my PBass and is the best I’ve got out of this amp so far.

After upgrading my pickups to the Dimarzio DP122 which are amazing pickups I decided the shielding buzz was the next thing to tackle. I purchased 20mm copper tape and lined the pickup cavity and the control plate cavity and it made a huge difference. I would like to change the tone pot and capacitor too It’s turned a good bass into a great bass Going to fit a HiMass bridge too as next job ( already fitted this bridge on my Player Series PBass )

Just ordered Boss WL-20 to use live with my PBass

I feel the Ray34 is an amazing bass to play, comfortable feel and balanced. Having said that I do love my PBass and I’m going to stick with that and sell on my nearly new Ray34 on here Tough decision and someone looking for a Ray34 will get a great bass at a reduced price.

I’ve come round to that way of thinking and I’m looking to sell my Ray34 or trade for a PBass

The guys at PMT online are great and very helpful Matt has helped me before, top bloke