philw
Member-
Posts
601 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by philw
-
!!! ON HOLD !!! Leduc U-Basse 4 Fretless (UMM4 SF) - *SOLD*
philw replied to Hellzero's topic in Basses For Sale
-
Evening all, Can anybody suggest somebody in Brighton/East Sussex to re-set the fallen sound post in my battered old cheap as chips double bass? Thanks Phil
-
That's brilliant Sandy. Thank you so much. I'll have a look at the bass again over the weekend but your pics should enable me to fix it. Phil
-
Sandy, I've replied to your PM Phi
-
Yeah converting the bass to passive might be an option, but we’re actually planning on selling it so having it working properly is much the better option. Do you still have the preamp you pulled out of your bass? P
-
Hi Phil, Thanks so much for the pics, but yes, it was the battery box end I wanted - in particular, where does the red wire from the battery positive terminal go. If you look in my picture, the red wire from the battery terminal is disconnected. Cheers Phil
-
Hohner Jack noisy - shielding / grounding question
philw replied to pn_day's topic in Repairs and Technical
Hi Phil, Having spent some time looking inside a Honer Jack recently (https://www.basschat.co.uk/topic/481089-honer-jack-electronic-repair/) I suspect the source of your noise problem might be the decidedly messy original wiring and the lack of any control cavity shielding - it really is a huge mess of over-long wires in there. To answer your specific question about bridge grounding, in "my" Jack there is what appears to be an earth wire heading off to the bridge, so I don't think un-earthed strings are your problem (although having just checked the continuity with a multimeter, there's a about 300Ω resistance between the bridge and earth, and that's a bit of a surprise - not sure if it's supposed to be like that). Anybody? And while I'm on, back to my recent Honer Jack post, if you were able to take a couple of pics inside your Jack to show me where the red wire from the battery goes, that would be very much appreciated. Cheers Phil -
Afternoon all, I'm trying to fix the active electronics on my Wife's lovely old Honer Jack bass and I'm stuck, so I wonder if anybody can shed some light ('cause I believe I'm not the first to have tried to fix an active Jack). The active preamp is housed in a battery sized metal box that sits in a double sized battery compartment alongside the actual battery. As you'll see from the pic, there's clearly a 1k resistor with a broken lead-out and that's obviously part of the problem, but there's also a loose red wire from the positive connector of the battery that I suspect ought to make its way back into the battery box to be soldered somewhere on the preamp PCB, but I've no idea where - without it, the preamp has no power. So if anybody here who has a Honer Jack would be willing to open it up and take a few pictures so I can se where that red wire is supposed to go, I'd be eternally grateful. Thanks Phil
-
Fender Player Plus Top Jazz in Greenburst - *SOLD*
philw replied to Precision's topic in Basses For Sale
No reflection at all on your lovely looking bass, a bargain that will surely make somebody very happy, but come on Fender - rusty screws on a 2022 bass! Back when I was a design manager in consumer electronics, one my biggest gripes was my purchasing colleagues thinking there was always pennies to be saved on screws. They'd buy the cheapest they could find that, apparently, met the design spec. They'd be made out of the softest metal known and they'd go rusty almost while you were looking at them. Seems Fender have a not dissimilar problem. Gorgeous bass though. GLWTS P -
I had one of those, an Aria Cardinal CSB300 as my first "real" bass. Well, an un-modded one anyway. Wish I still had it really.
-
Status groove 5 string bass white/cream on hold pending - *SOLD*
philw replied to hen barn's topic in Basses For Sale
-
-
Hi Gareth, Hope you're well. That's a very kind offer but I suspect 120 will be too heavy, especially as I'll possibly be retuning back to E for a couple of songs mid-gig. And @Doctor J - you've never experienced a Paul Diello gig have you? There's typically time between songs, while Paul has the entire audience bent double with laughter, to build an entire bass guitar from scratch, so I reckon a quick re-tune to E will just about be feasible. Thanks again everybody for the help. I think I'll go for a 110 set, or maybe a 105.....Keep your eyes peeled for me selling a little used set of strings shortly. Phil
-
Thanks all. I think the majority of the songs I’ll be playing on the Wal will be down a tone (all strings, not just the E). So I think going up a gauge will be worthwhile - the tension on dropped 100 - 40 (D’Addarios I think) gauge just doesn’t feel right. I guess it’s just a question of whether I go to 105 or 110 (and experimenting with bass strings is an expensive business). P
-
Afternoon all, I have a series of covers gigs in May where a few of the songs will be played down a tone. I’ll be using my Wal fretless and it would normally be strung 40 - 100, but that’s too light a gauge for drop D. So what string gauge/brand/type should I go for that’ll work for both tunings? Thoughts and suggestions please! Ta Phil
-
Not any more but I'm still occasionally in touch with Joe and he's still building some amazing guitars and basses. That red singlecut retro looks an awful lot like the demo model I bought when I first started working with Joe, but I'm pretty certain mine was passive. Anyway it was a really lovely bass. Anybody who goes for the sale one will I'm sure be very happy. P
- 10 replies
-
- 1
-
- 4 string bass
- active
-
(and 2 more)
Tagged with:
-
-
FS: '81 Washburn SB-40 fretless (Bathiki Kumalo/Graceland) **SOLD**
philw replied to Beedster's topic in Basses For Sale
-
-
SOLD:Aria Pro II 1981 CBS-380, Medium Scale, Custom Colour, £350
philw replied to sonicartists.com's topic in Basses For Sale
HEIC (High Efficiency Image Compression) is the default image format in iOS these days. It's a good format (less destructive compression than JPEG) but not widely used outside Apple and some pro image processing (yet). You can change the default format in the iOS settings and put it back to JPEG to make things more easily shareable. Oh and an Aria CS380 was my first proper bass. Bought it, coincidentally in Chichester, the day John Lennon died. P -
This post cannot be displayed because it is in a forum which requires at least 1 post to view.
-
Thanks all. That's all interesting stuff. I had a feeling that the VT 200 might be too good to be true. P