shoulderpet

Bit confused as to why this is a "conversion" neck, surely there is no conversion needed you just buy a jazz neck and stick it on a precision bass.

Ok, I have a Kent Armstrong ceramic hot pickup on the way to replace the Wilkinson. Next question is, what colour for the pickguard? What colour would go well with red? The existing pickguard is ok but a little boring

Not much to add to this other than the few basses I have played that have had 2 tone controls, the tone control for one pickup always seemed to also turn down the tone for the other pickup, I'm sure there must be a workaround but worth knowing.

Ok so I seem to have got the pickup dialed in now after a lot of farting about with the pickup heights and it actually sounds pretty decent now so that is good 👍

And the Wilkinson ceramic P pickup is junk, they used to make a decent ceramic pickup but they have moved to these newer "variguass" pickups for there ceramics. Strange considering there alnico pickup is really good, I am waiting for the wiring harness to arrive but i wired it straight to the output jack and the string to string balance is terrible, lesson learnt I should have paid a few quid more and got there alnico pickup which is much, much better.

And, I managed to get the action at the nut sorted, now with the 3rd fret pressed there is just a sliver of a gap at the first fret for each of the strings, action at the 17th I'm not that picky about and as long as it is in Fender spec ballpark I am happy but action at the nut affects the playing feel far more imo, also swapped out the strings for some Rotos I have a cheapy Wilkinson ceramic P pickup on the way that I will fit until I have the funds to upgrade to something a bit more flash. Oh and something I don't think my previous pictures showed very well was the bridge, I love these old school notched saddle bridges

They are good pickups, better than some of the big name ones I have used

I wish that was low action, that photo is to show how the nut is cut too high, that is the action at the first fret with the 3td fret fretted, the action is ok lower down the neck but is way high at the first fret, I plan to get that sorted soon.

So, technically more me putting parts together than a build but first time I have done this, still a work in progress, I still need to add the pickup and wiring, the cream pickguard has to go(not a fan) also the nut height on the neck is on the high side so I need to lower that somewhat. Neck and body, I added the tuners and string tree ages ago Neck added to body Bridge, pickguard and strings added Nut is cut too high, I will need to address this, this is at the first fret with the 3rd fret fretted

Thanks, the body has a cutout for neck heel truss rod adjustment, the pickguard has 9 holes but I dont think it is the original pickguard as there is no notch for the truss rod adjustment, I will have to take off the pickguard and see if there are any additional holes in the body.

Thanks, I am not really bothered about the existing screw holes as long as the pickguard physically fits the bass, quite happy to re-drill new ones

Hi all I am going to be starting a build soon and by end of this week I should have most of the components to make the barebones of the build (I have the bass body, neck, neck plate, bridge should be arriving this week) however I have no idea what bass the body actually came from (pickguard is a 9 hole job and the bass is apparently from the 90s if that helps at all) so my options are a)pop the pickguard in the post and get someone to cut one based on the exisiting pickguard b)order one and hope it fits I would love for option B to be a viable option as i am building on a bit of a budget at the moment So my question is, I know Jazz bass pickguards can vary quite a lot and it can be a complete cr*pshoot as to whether a pickguard fits or not, are P basses the same or are the pickguards more universal in there measurements? thanks

Brilliant, I will PM you, thank you, hopefully will just be the sides that need it

Hi I am soon starting a build and I have the neck already and waiting on delivery of the body, I found a used p bass body online and bought it as is an ash body and with the maple fretboard on the neck and the ash body it should hopefully be a nice bright sounding bass However the neck pocket is a little bigger than the neck being fitted and there will be half a mm gap either side, what is the easiest most foolproof way of filling the gap? Thanks

Me too

Ok, try the below video but basically an Epiphone Thunderbird https://youtu.be/EdI6EU-gYd8?si=ENCJpE81--hqrOFy

Hi I have a Northwest P bass neck that I have been meaning to use for a P bass project that I am yet to start, anyway I was looking a P bass bodies and the cheapest option I can find that is (as far as I can tell) likely to be a fit without too much faffing around is the Northwest P bass body however for the same price I could get a Squier sonic precision bass and can keep the parts I like and swap out the parts I don't so I was wondering if anyone could confirm the width of the neck pocket/neck heel on the Squier sonic precision basses, thank you

For me this epitomises the term dark https://youtu.be/yCd1vXsvkV4?si=HjmTdyQUaLG_SXHk Kings of Leon charmer for anyone that doesn't want to click on the link

when I think of dark it brings to mind a tone with a slight bump in the low mids with naturally slightly rolled off (as opposed to the low pass filter effect of rolling off a tone control)sounding treble and low treble frequencies but without a loss of definition in the tone which for me is what makes it different to a muddy tone which has rolled off treble and no definition.