Jump to content
Why become a member? ×

Geek99

⭐Supporting Member⭐
  • Posts

    8,192
  • Joined

  • Last visited

Everything posted by Geek99

  1. hi all can I have your thoughts on this? Its about a twelve string Tanglewood Oddyssey (bought off here). Its a narrowbody with a bowlback. It had an Artec APC Pro with a [u][b]solid[/b][/u] PP607 piezo in the bridge, 75 mm saddle with symmetrical min height of 4mm and rises to 6mm high at the centre, Width is 3mm. When I got it, the preamp didnt work, but since I had no need of it, I didnt pay too much attention. It sounds awesome acoustically. Fast forward and I find tuning it a pain; I wanted an onboard preamp with a tuner so after much searching for a narrow preamp I finally found that a Fishman Presys + would fit with a little chopping of the cutout. It comes with a mesh style piezo.I kept this as A) its hard wired into the preamp the existing piezo had a 3.5mm jack on and I didnt want to chop and join. Its fitted, it works and I threw the rubbish away, its was only when I went to retune it that I noticed the bass E strings were a bit low and buzzy,. two reasons 1. The mesh squashes, in a way that the solid preamp didnt so the saddle sits a little lower. 2. There is less bulk (no solid right angle) where the wire passes though into the bridge and so the saddle "wobbles" on the bass E position and sits lower as it tips slightly under the tension. I'm aware that the mesh style allows fuller contact between saddle and body and so has some advantages, Equally I need it to work. My thoughts are 1. buy another a solid piezo and join it (I foolishly threw the existing one not realising they cost about £13 2. get a taller saddle(possibly a compensated one) and sand it down. Issues - 1) most of the claimed bone ones seem actually to be plastic 2) I might cock it up ( any tricks tha tI can pickup) 3. Prop the saddle up with some match sticks and sand those down What do you recommend, folks ?
  2. I use cheapie fender phosphor bronze on my shortie They are peanuts on amazon
  3. [quote name='highwayone' timestamp='1484775696' post='3218420'] Tinkered with guitar on and off for years and never really mastered it. Any tips on the best way forward,had some lessons but all the tutor was doing was learning me a new song every week but nothing else. Any good books or sites out there to have a gander at? Cheers. [/quote] Yes change the strings for bass ones
  4. [quote name='Grangur' timestamp='1484663983' post='3217279'] NO!! Well, now tell me this isn't a true blue USA Fender http://www.ebay.co.uk/itm/OLD-HOUSE-CLEARANCE-BASS-GUITAR/112270155837 Encore I believe. [/quote] To be fair he never claims it is one, and notes that the decal has probably been added
  5. why would you bother? Squier VMJs are perfectly respectable and hold their value well. They punch well above their weight in my humble opinion. Actual fenders have faces that discolour more quickly that the side or rears as they used to use a different varnish to cover the decal so it really doesn't matter what you use and it may even end up looking cool, as a poster above noted.
  6. Totally unreasonable buyer
  7. Nice !
  8. [quote name='The-Ox' timestamp='1484068915' post='3212421'] yeah agreed, when done well, a subtle bit of sunburst does look good in my opinion. Just debating whether or not to refinish it all olympic white and let the sunburst come through naturally, as its nitro [/quote] I would - and I would also stick with the tort
  9. [quote name='lowdown' timestamp='1483291345' post='3205965'] Not sure what you mean.... http://youtu.be/QAVm2bWulLc [/quote] Ugh that is now burned into my retinas .....
  10. He is a hero of mine
  11. [quote name='SpondonBassed' timestamp='1483734527' post='3209764'] You filthy minded individual you...! Heeheehee. Just clean the floor before you leave for H&S please? [/quote]
  12. [quote name='silverfoxnik' timestamp='1483730222' post='3209705'] Totally agree Pete; she was sensational! [/quote] And I really like that purple dress
  13. Hmm That's quite a toss up (to Chaka khan in bondage gear, not the nice looking Imelda may)
  14. I've yet to watch this actually. Was it any good, or should I just hit the yellow Sky button in Planner and consign it to the recycle bin of history?
  15. Gas free
  16. I have.normal hands and manage a chunky precision bass, consider a thin neck bass to increase your reach Equally there are plenty of short scales about, no shame in playing them
  17. Alimony seems a good reason
  18. [quote name='YouMa' timestamp='1483443236' post='3207116'] she has a fantastic ass though. [/quote] Pictures please
  19. https://www.sheetmusicdirect.com/se/ID_No/116967/Product.aspx
  20. [quote name='mentalextra' timestamp='1483470343' post='3207433'] Who played bass for ABBA? [i]Lay all your love on me[/i] sounds fun [/quote] Rutger gunnarson
  21. Is white with a black plate particularly characteristic of the 60s ?
  22. [quote name='SpondonBassed' timestamp='1483131895' post='3205007'] Using these in combination can deepen your "palette" as it were. [/quote] True I tend to swap about depending what I have to play, I see this as preferable to rigid adherence to one mode
  23. [quote name='Bridgehouse' timestamp='1483008524' post='3204037'] You know, at first I wasn't sure - but I've seen the light and the tort is great. Much better than black with natural finish I think.. [/quote] I might buy some tort for my vintage brand mm copy, now I've seen that
  24. Awesome It even has tort
×
×
  • Create New...