Si600

Dang, I was going to PM you this evening about it! Never mind, another one will come along no doubt.

I don't know how cabs are made so this may be a stupid question, but can you swap out the 4 ohm bits for 8 ohm bits? Just thinking about running the 4 ohm (If I get it, have to wait until the new year anyway I think now) until it needs changing and then swapping out the electrics and get an 8 ohm cab. Wild speculation on my part, so if I'm wrong so be it.

Why won't a 4 ohm cab be able to handle extra power?

Thank you all for your input, even if it wasn't percieved as being particularly encouraging or helpful at times .

As the GK MBE212 has popped up quite a few times in the suggestions then I'll try and find one to try/buy, or even a Neo, there was one for sale on here in May for £280 so although it's a stretch it might be worth it to get the next level up as it were.

I guess the suggestion for going 8OHM instead of 4 is that it will probably be loud enough anyway, and it gives scope to extend to another cab if needed?
Though quite what venue will require that I have no idea, nothing I'm going to be playing any time soon anyway .

I've made representations to Santa, so while I doubt a whole cab will appear, a contribution to it might and then I can peruse the classifieds!

Cheers all.

Simon.

I suppose that at the moment my budget is maybe a couple of hundred quid, whilst saving up to maybe replace whatever I end up with should I discover that it no longer fulfils my needs as a rig. Looking at the suggestions, a MBE212 seems pretty good.

[quote name='The Dark Lord' timestamp='1354792888' post='1890374']
So you buy a relatively expensive and good quality amp head, but you're after cheap speakers? Nice one.
[/quote]

I'm not sure that's quite fair This looks a good option, possibly a little too large physically, [url="http://basschat.co.uk/topic/193603-fs-eden-n410rs-4x10-cab-l190/"]http://basschat.co.uk/topic/193603-fs-eden-n410rs-4x10-cab-l190/[/url] Are Eden classified as "cheap speakers"?

Because I'm probably a fool, and my money and I are easily parted, I've just got a GK MB Fusion. Now I need a cab to go with it...

So, has anyone any recommendations for a small footprint, lightweight, 500w @4 OHM single cab solution that will suit the amp?

If anyone says Barefaced I'll be very rude to you as I want one anyway but I can't afford one, at least, not new, and even second hand they're a bit frisky for me.

[quote name='daz' timestamp='1354738826' post='1889929']
Ford are well aware of it but are denying any responsibility for a recall (like in Fight Club)
[/quote]

Not surprised. It's still available if anyone wants it after reading this!

Any idea how much I'd get for it as scrap value?

I did bang it into a pothole at over 70 so you can't really blame it . I chopped my Zetec S TDCI in for a 120ps Titanium, and didn't think to put the extra wheel in the boot when it went

I had it serviced not long before I changed it and was advised that both near side wheels were buckled... I think even Quality Street is too good for them

One 17" current model Ford Fiesta Street Pack alloy wheel. It's been professionaly straightened but it's still scruffy. Collection from near Daventry if you want it.

Roger Manganelli from Less Than Jake

[quote name='thisnameistaken' timestamp='1354106805' post='1882087']
Well the signal coming out of the FX loop is usually a line-level low-impedance signal, so it will survive cable travels better than the signal from your bass. But most pedals are designed to operate with an instrument-level signal at the input - not line-level - and some (vintage fuzz circuits particularly) operate best when fed a higher impedance signal from the passive pickups of a guitar/bass and don't sound so great when fed by active electronics, so they would no doubt be even worse in an FX loop.

In short: 9m is (IME) enough cable to suck tone, but after the first 3m you've got your amp so the signal gets buffered right there. From there you're looking at a mere 6m run to the board and back which isn't too bad at all, but you might find your pedals don't like the signal you're giving them.
[/quote]

Thanks
At the risk of properly derailing the original thread, what's the FX loop for if it doesn't supply the right signal for a pedal board?

What happens to signal degredation via cable if you use the FX loop? 3m from bass to the amp, 3m out to the board and then another 3m back to the amp before it hits the speaker?

Just asking really, 9m of cabling may not make a huge difference but I'm curious whether it does.

[quote name='MB1' timestamp='1352369652' post='1862174']
MB1.
Why turn a seven string into a six string?
[/quote]

If you're going to do something as daft as that, at least change the pickup to a six pole one so they line up with the strings...

I wonder how much a seven string Jackson is new, the only reverse headstock hardtail Jackson I can see is the JS32RT which retails from GAK for £226.

I'd like to take credit for it, but it wasn't my idea. I got it from the 'net somewhere. I'll accept your plaudits and beer though

I'm probably being extremely dense here as usual, but can you use a wireless as IEM as well?

My understanding of wireless is that it goes from the bass to the amp via the ether, through the effect send/return if needed and then to the speaker. At what point does the signal come back to you if you're using it as IEM if it can be used so?

Presumably the IEM pick up point is your transmitter on the bass so that you get the clean sound in your ear before any amp/effect processing?

I'm looking at the Line6 G90 Relay at the moment more for bling and rackability than any real need for it, damn GAS

With the "Master Axe Sharpener"'s penchant for cutting the "zero fret nut" to within a gnats cock of the fingerboard, I wonder what he'll do if he ever gets a guitar with a locking nut on it?

It's been removed...

Can't say I blame him, those last C# A# C# sound horrible in context with the D and E preceding them

Shall we stop there then and go away and contemplate the horror of our creation?
Watch this space for links to odd jazz tunes

Actual responses and from a decent number of people who all seem to be insomniacs

We've got 13 tones so far,

D F# Ab B A E G# C F F C Bb D

How many do people think we need before we stop the thread and start interpreting and posting our efforts?

MODS: Should this thread be in the Recording section?

How about this; we each post a note, wait until there is a good number of posts and then put up our interpretation of what we get?
Rules:

1 One note per post
2 No double posts, wait until someone else has posted, but you can post the same note
3 When playing, any pitch goes but the notes must be in order posted
4 You can play in any time and rhythm you like, if you want to do it all in sixteenths that's up to you

Any takers? Bearing in mind that I am the death of posts so you'll all ignore me anyway but I'll start with

D

[quote name='bassace' timestamp='1351243019' post='1849071']
Anyone else a GD fan?
[/quote]

ep, both myself and the missus watch it. This weeks was interesting, liked it but I wouldn't want to live there.

I thought Man Made House was interesting, if a little self indulgent, but it was fun to watch I love the chair from a tractor linkage, want one!

Hmmm, I hadn't considered damage to the decor from a mishandled metal edged box

How about hybrid valve/ss amps?

I'm going to start this here, but if it's thought that it should be in the Gear section then please will a mod move it.

I'm looking at flight cases, for no better reason than I can and I want to make one for my pedal board. I'm also considering getting one for my amp when I actually get one that I can case up.

My real question is, ply/hex board or ABS cases? I personally prefer the old skool black box with silver edges look and think the ABS ones just look plain fugly, but I'm prepared to overlook that if they are better than a solid wood case. Also, shockmount or not?

Discuss

I've ssen lots of instructional bits on the net about building a flightcase, make a box cut the top of and mount with extrusions, but has anyone any experience of making rack cases? How do you mount the rails in them, are they just screwed into the inside of the case?