Jump to content
Why become a member? ×

JazzBassFan

Member
  • Posts

    24
  • Joined

  • Last visited

Everything posted by JazzBassFan

  1. Bump again for the new price...
  2. [font="helvetica, arial, sans-serif"][color="#282828"]nothing here [/color][/font]
  3. 60s bridge jazz bass pickup position - 798mm from the nut, 70s - 808mm from the nut. 60's has more bass, 70's more middle tones, I like it more when I'm using distortion. It is possible to place two of them in the MM pickup routing, but it has to be fitted by somebody who nows what he's doing good luck!
  4. [quote name='lettsguitars' timestamp='1359503138' post='1955995'] The adhesive on slug tape isn't generally conductive. Stick it to your plant pots instead. That's what it's for. wd music, allparts, axetec etc. Soldering onto copper tape which is stuck to wood isn't always straight forward. The wood sucks the heat up see. One 12"x12" sheet of the real deal should do a few guitars for under a tenner. [/quote] Actually it's a pretty good idea to use slug tape on guitar. It has to be conductive and it is, the capacity (measured in farads) is more less the same, so it doesn't make any difference at all, both do the job as they should no complaint on slug tape comparing to sheets and glue is ok. Use whatever is easier/cheaper to find/use. Graphite paint is not that good actually, has bigger capacity than copper shielding.
  5. [quote name='mr.noisy' timestamp='1359714852' post='1959098'] Demanufacture is a great guy, deal with absolute confidence. Very few people here know that in the past he was making custom cabs that were and still are highly regarded. [/quote] agreed sir! BTW playing this bass is a real PLEASURE, if I only had the money...
  6. hi mate. http://www.tdpri.com/forum/tele-home-depot/169606-1960-jazzbass-build.html get in touch with him cheers, Andy
  7. [color=#282828][font=helvetica, arial, sans-serif]1. Jimbothy[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]2. Paul JH[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]3. Lord Sausage - could I be after you please? If yes, then:[/font][/color] [color=#282828][font=helvetica, arial, sans-serif]4. JazzBassFan[/font][/color]
  8. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  9. badass or hipshot a brass not alu version
  10. change your cabs mate, leave the head alone well I'm not ashdown lover at all but abm head can sound ok, but their cabs (especially budget series called mag) are rubbish! not even suitable to be used as a bed side table... if you have no money - try to find peavey tx/tvx or hartke 410XL or old trace elliot 4x10 cabs - your sound will improve straight away.
  11. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
×
×
  • Create New...