Jump to content
Why become a member? ×

sifi2112

⭐Supporting Member⭐
  • Posts

    1,099
  • Joined

  • Last visited

Everything posted by sifi2112

  1. I finally got to try my Koch (guitar) poweramp rated 90w through my two MAS26 cabs at a rehearsal & couldn’t crank it too much coz it was too loud lol !
  2. Traded elsewhere - Earthquaker Devices - Plumes kinda tube screamer pedal, excellent condition with box £80 posted
  3. The original Diamond BCP-1 probably needs no introduction lol .. comes with an eu (2 prong) 20v centre positive psu but will include reverse polarity (red) cable. This pedal takes from 9 up to 24v centre positive power
      • 3
      • Like
  4. Johnk Mini XO - crossover distortion pedal .. see Luke’s original post below (hope you don’t mind Luke) .. really nice pedal but not quite what I was looking for …
  5. Ideally a limiter like Boss LMB3 but would consider other analog pedals, have chorus flanger phaser kinda covered but still open to trades ….
  6. Traded - Demonfx Microtubes X pedal in nice condition (& box) £50 posted .. open to trades
  7. Demonfx Microtubes X .. jury is out ..
  8. @sifi2112 Vigier Excess 4 Mas26 (x2) sfx D3 preamp Koch ATR4502 poweramp
  9. Thanks guys .. I’ve two MAS26 cabs so I’m thinking of having a custom flightcase built to house both, if I start gigging again which is a possibility
  10. Hi all, Are there any (sound) issues stacking a cab on an empty flightcase ? I want to bring the cab closer to ear level but have heard there might be issues putting bass cabs on empty (hollow) boxes ? I don’t have the case but also don’t want to have one made if stacking on top actually detracts from the sound lol Any advice/experience welcome .. guru Bill probably a knows 😀
  11. I have a Koch ATR 4502 which puts out 90w bridged. Freq responds 40-20k Hz .. intention was to use for gigging ( 4 string standard tuning & sfx sound Thumpinator preamp) but never got the chance .. use it at home for guitar & bass with respective speakers .. it’s loud & very well made, think with enough efficient speakers it would be fine …
  12. I made this from a J&D jazz using ETS bridge, ABM string locks & Bareknuckle pups ! It’s definitely not a looker but sounds & plays well … Might be persuaded to part if interested
  13. I did the same for a project & it sounded really good, I got a spare nut for my Vigier which can be interchanged as it’s just for holding strings in place (has zero fret). I didn’t want to go back to 5 string, though I did find it cheaper getting (Warwick) 5 string set rather than dedicated 4 string set 130-060 as there aren’t many available. So like you said just keep playing & get used to it. I’d do it again if I was in a heavy rock or metal band
  14. Price drop £300 or can break & sell as spares …
  15. I’m selling a headless that has ETS bridge .. if I get no interest I may ‘break’ & sell parts separately
  16. SOLD - Darkglass B7K Anniversary preamp pedal in great condition without box but free Velcro lol … posted
      • 1
      • Like
  17. Great clean preamp with two balanced / unbalanced outputs one XLR and one trs or ts / ground lift / phase reverse / newer version of Thumpinator with on/off switch / parallel input (which I used for tuner) 9v 200mA centre negative with 9v parallel out. The D3 does boost the voltage. Internally, it operates to around 35V (rail-to-rail). 3 impedance selector switch & mute switch. Top sticker came off so re-glued but not a great finish. Size 108 x 44 x 168 mm
      • 2
      • Like
  18. Withdrawn - KOCH ATR-4502 2x45w / 90w bridged @ 8 Ohm .. great quality amps these made by valve amp specialist Koch in Holland. It’s loud ! Weighs 5.5kg in a 1U rack format. ATR stands for Authentic Tube Response, each channel has a preamp tube. Frequency response is from 40Hz to 20k I believe, I know this is a guitar amp but I used it for bass, no problem. Jack out speaker connectors that also doesn’t need to change for bridged mode. 2 speed thermo controlled fans. Koch told me they are discontinuing these. Only selling as I’m kinda retired from gigging … more pics to follow https://www.koch-amps.com/guitar-poweramp-atr-4502.html https://www.koch-amps.com/uploads/2/4/0/4/24048927/atr4502_manual.pdf
  19. Withdrawn - Here’s a decent 34” headless 4 string I made from a J & D 75 jazz as a donor neck & body, got frets levelled before modding. One little dent on neck & plenty of rough parts on body etc but was always meant as a ‘distressed’ type lol Not a lightweight but definitely no neck dive ! Schaller strap lock buttons. Cut down hex key for truss rod. ABM (German) bell brass string retainers. They do move a little if you over tighten but I’ve not had any issues with them. ETS (German) bridge / tail piece. Bareknuckle 60 PE jazz pickups. Hardware & pups would probably cost round 400 lol Here are some links etc … https://www.dv247.com/en_GB/GBP/J-D-JB-Vintage-1975-Electric-Bass-Black-/art-BAS0004370-000 https://abm-guitarpartsshop.com/ABM-GUITAR-PARTS/Headless-Systems/Guitar/Headpieces/ABM-7010c-Chrome::435.html https://www.ets-hardware.com/index.php/en/produkte-2 https://www.bareknucklepickups.co.uk/pickup/j-bass/j-bass-60-pe
  20. Looking good Andy .. interested in hearing how the Ashdown compares to the GED ! I’ll patiently await your video lol
  21. I was disappointed with the GED2112 .. too fuzzy for my liking, guess I was expecting a Darkglass X7 esque gritty sound but alas it didn’t deliver for me. Yes two separate outputs for either two poweramps or left / right single poweramp with maybe hi / lo cabs. I think there’s an internal dip switch to run them in parallel though. Pity I couldn’t get it to work for me coz I already own two great poweramps .. the Ashdown looks interesting …
  22. Cheers Rick .. time to face the music lol .. you never know tho but stuff I wanna play is not what most people want. I’ll stick to a bit of home recording for now. Probably gonna list my fab Warmoth jazz too .. too nice just to hang on my wall !
  23. Correct .. I had it up fs on commission at Bass Direct a couple of years ago but decided to keep it, alas I think my gigging days are now over
×
×
  • Create New...