orangepeelneil

[size=3]Hi Kyle. I'll take the strings if they are still available. My Brand and gauge-are they unused? Is PayPal ok? send me a PM Cheers Neil [/size]

[size=3]Hi Oli, Yeah I has considered that, but the weight of the amp ~35Kg plus the flightcase still is a big consideration. I'm favoring my TE 2x10" combo at the moment, think the Orange Ad200B is around 20Kg It's not an easy choice letting the SVT go, I'd wanted one for nearly 10 years. Cheers Neil [/size]

[size=3]Hi Everyone, [size=4] Now thinking of selling too for £850[/size] I’m looking to trade my U.S.A made Ampeg SVT AV(Anniversary Version) with an Orange Ad200B amp. I realise most people tend to keep their Orange amps, but someone may be looking for a change of amp or a bit more power. I bought this Ampeg off Cameron here on basschat a while ago, and despite totally loving the amp (in every way), it’s just too heavy for my current gigging needs and so isn’t getting used, plus I don’t have a suitable 4 Ohm cab to use with the amp- I only have a 8 Ohm cab. Despite knowing I’ll really regret this-I’d like to trade it... •[i]It’s a made in U.S.A SLM Electronics model (2007) •Immaculate (as new) condition throughout, minimal usage by me, tubes look and perform as brand new. •300W all tube power (see photo for tube line up) at 4 or 2 Ohms. •Comes with original receipt and documentation. •Nice simple 3 band EQ plus 5 position midrange frequency range switch. •Rear self bias pots and indicators following power tube replacement. •This amp really sounds great with the right cab. •Comes with Castle cases ‘liftoff’ flight case (£150)[/i] [url="http://shop.castlecases.co.uk/product_info.php?cPath=29_37&products_id=74"]http://shop.castlecases.co.uk/product_info...;products_id=74[/url] This amp is heavy, plus the flightcase adds a bit of weight-Its typically a two man lift. I’m based in Bristol, but would travel for the right exchange, as discussed I only currently have a 400W 8 Ohm cab so can’t demo-I recommend it’s tested with the new owners cab. Cheers Neil [/size]

[size=3]These are still for sale, but I'll put them on evilbay this week. Cheers Neil[/size]

Bumpy bump

Ok Promised to Geoff... Cheers Neil

[size=3]Hello everyone, FOR SALE:Celestion C10H-100 For Trace Elliot Combos/Cabs This is a 16 Ohm, 10” 100W speaker from a Trace Elliot 2x10“ combo (circa 2000). The speaker works fine,is pretty good condition, ideal for a replacement. It has “Trace Elliot” on the dust cone.Still has the working pull off connectors, one of which I’ve soldered to for testing. I was thinking £25 delivered. Cheers Neil [/size]

[size=3]Price reduced to £30? delivered Cheers Neil [/size]

[size=3]NOW PRICE DROPPED TO £250. Great cab for the price... Cheers Neil [/size]

[size=2]Hi, Yes it's a 6 Ohm cab, don't know if they're doing only 4 and 8 Ohms now- I think it's a 2008 model. [url="http://www.gear4music.com/Guitar-and-Bass/Warwick-WCA-611-PRO-Series-6-Ohm-Bass-Cabinet/C2R"]http://www.gear4music.com/Guitar-and-Bass/...ass-Cabinet/C2R[/url] The Warwick downloads don't work properly on my computer, but I managed to download the wiring diagram. Cheers For your interest. Neil P.S I would ship to the NE if you pay the courier. [/size]

[size=2][size=3] Hi Everyone, [u]FOR SALE : Warwick WCA 611 Pro 6x10" bass guitar cab 6 Ohms, 900W Rms[/u] Had this a while, gigged a few times - but just too big to store and transport for my current needs. Awesome sounding 6x10" bass cab with HF horn, loads of bottom end, punchy and good clarity. Solid plywood construction, bass reflex cabinet design with carpet covering. Slight smaller and easier to move than a 8x10" but just as good. Good condition has a few nicks and dings but nothing serious, just normal wear and tear. (****AMPEG SVT AMP NOT INCLUDED*****) [u]Specification[/u] - 6 x 10" Custom Warwick speakers. - High Frequency horn with rear attenuator. - 900 watts RMS. - 6 ohms enclosure - Ported bass reflex cabinet - Rear tilt grab handle and two wheels for easy transport. - Rear panel = 2xSpeakons, 2x1/4 jacks and Horn attenuation knob. - Dimensions: 990mm(H) x 605mm(W) x 485 mm (D) - [size=4]NOW Only £250[/size] --- Best internet price £600 Cheers Neil , collection from central Bristol (BS3) [/size][/size]

Hi, Sent you a PM regarding the DHA VT1 cheers Neil

[size=3]Hello everyone, [u]FOR SALE: Fender P-bass pickups from 2006 U.S.A made Highway 1 bass. [/u] These were removed off my 2006 U.S.A made Highway 1 Fender P-bass from new (I already had a new pickguard and high output pickups as replacements) These were used for a few months so there are some marks but they are essentially new. They work fine, sound good and have an impedance of 11.5K Ohms. According to the literature that come with the bass they are” Standard Vintage Alnico Split Single-Coil Precision Bass Pickup ” Think they are U.S.A stock but could be wrong. Very good condition, no screws or springs, but have the original foams Thinking £30? delivered Cheers Neil [/size]

[size=3]Hello everyone, [u]FOR SALE: Fender P-bass pickups from 1985 Made in Japan (MIJ) bass.[/u] These were removed off my 1985 (Made in Japan) Fender P-bass and replaced by some SD ¼ lbs I had spare. They work fine and have an impedance of 10.5K Ohms. They are off a PB57 model P-bass so the ground wire (black) is short where it was soldered to the pickup brass base plate. There is some blue paint on the (hot) white lead from the scratchplate(see other Ad) which was creatively sprayed blue. Condition reflective of age, no screws, springs or foam as I used them. Suggesting £20? delivered Cheers Neil[/size]

[size=3]Hello Everyone, [u]FOR SALE: Realistic ( Tandy/Radio Shack) MPA-30 PA amp 20Watt mains or 12Vdc battery amp.[/u] Nice compact amp, two main 1/4" inputs and stereo aux/phono plus tone and master volume. Drives 4, 8 or 16 Ohm speakers plus 70V transmission line . Tried this with a few speakers I’m selling and It sounded pretty good with a bass. Ideal for a cheap practice amp- pretty loud too-Just hook it up to some speakers. This item is boxed with instructions and good condition. It also has a 12V DC supply lead so you can run it off a battery for portability. Pretty heavy – was thinking £20 Delivered. Cheers Neil [/size]

[size=3]Hello everyone, [u]FOR SALE:Celestion? 10” speaker 8 Ohms (date code T3876 =1985)[/u] This was pulled from an old cab, unsure of origin. It has 50W 8Ohms hand written on it, which I possibly believe. Pretty sure its a Celestion has the right style cage plus the “MADE IN ENGLAND” like my other Celestion speakers. The speaker works fine -tried it with an amp (for sale on basschat too) and tatty but GWO, ideal for a replacement or project etc. Thinking £15 delivered Cheers Neil [/size]

[size=3]Hello everyone, [u]FOR SALE:Celestion C10H-100 For Trace Elliot Combos/Cabs[/u] This is a 16 Ohm, 10” 100W speaker from a Trace Elliot 2x10“ combo (circa 2000) I have. The speaker works fine ( tried it with an amp for sale on basschat too) and is pretty good condition, ideal for a replacement. It has “Trace Elliot” on the dust cone.Still has the working pull off connectors, one of which I’ve soldered to for testing. Pretty Heavy, so I’ll have to see how much exactly postage is? I was thinking £25 delivered if postage is not too expensive may end up as nearer £30 Cheers Neil [/size]

[size=3]Hello everyone, [u]FOR SALE: Fender scratchplate from 1985 Made in Japan (MIJ) P-bass.[/u] Three Ply 13 hole scratch-plate W/B/W. Along with the Pickups this was removed from my 1985 PB57 P bass. The previous owner had sprayed the pick guard blue. I removed this and lightly wet ’n’ dried the surface to clear all the paint away, the scratchplate is now matt and had lost its glossy finish-I did used it for a while (may be some bits of paint in the screw holes).Ideal for a project. £7.00 Delivered [/size]

[size=3]Hello everyone, [u]FOR SALE: Fender P-bass pickups from 1985 Made in Japan (MIJ) bass.[/u] These were removed off my 1985 (Made in Japan) Fender P-bass and replaced by some SD ¼ lbs I had spare. They work fine and have an impedance of 10.5K Ohms. They are off a PB57 model P-bass so the ground wire (black) is short where it was soldered to the pickup brass base plate. There is some blue paint on the (hot) white lead from the scratchplate(see other Ad) which was creatively sprayed blue. Condition reflective of age, no screws, springs or foam as I used them. Suggesting £20? delivered Cheers Neil[/size]

[size=3]Hello everyone, [u]FOR SALE: Fender P-bass pickups from 1996 U.S.A made Highway 1 bass.[/u] These were removed off my 1996 U.S.A made Highway 1 Fender P-bass from new (I already had a new pickguard and high output pickups as replacements) These were used for a few months so there are some marks but they are essentially new. They work fine, sound good and have an impedance of 11.5K Ohms. According to the literature that come with the bass they are” Standard Vintage Alnico Split Single-Coil Precision Bass Pickup ” Think they are U.S.A stock but could be wrong. Very good condition, no screws or springs, but have the original foams Thinking £40? delivered Cheers Neil [/size]

[size=3]Hello everyone, [u] For SALE : Digitec Bad Monkey Tube Overdrive pedal,[/u] Bought new a few months ago just haven’t been using it-good solid bit of kit. Ideal for guitar, does loose a bit of low end with bass (if i’m honest) but can be modded easily. Gain, Level, 2 band EQ Dual outputs Boxed. VGC hardly used. £25 Delivered Cheers Neil [url="http://www.digitech.com/products/Pedals/BadMonkey.php"]http://www.digitech.com/products/Pedals/BadMonkey.php[/url][/size]