mikegrovesmusic
-
Posts
55 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Shop
Articles
Everything posted by mikegrovesmusic
-
Hi, I’m selling my Strymon Zuma Pedal Power Supply. £180 includes postage within the UK Includes an IEC lead, 7 of the original power cables (right angle to straight) and a handful of voodoo labs power cables (right angle to right angle) Specs: 9 high-current, fully isolated outputs. 9 outputs offer 9V DC option. 500mA per 9V DC output powers nearly any pedal. 2 selectable outputs offer 9V, 12V, or 18V DC options. 12V option provides 375mA, 18V provides 250mA. 24V OUT jack allows connection to additional outputs via Strymon Ojai (sold separately). One slight little chip to the paint on the top (photo below) and there’s a bit of sticker residue on the bottom left over from previous Velcro. Thanks, Mike -
Price drop - £135 includes UK postage Hi, I’m selling my Aguilar Octamizer version 2. Well looked after and very little use. £185 price includes UK Postage. Here’s a bit of info from Aguilar: AN ALL-ANALOG OCTAVE PEDAL THAT CREATES A WIDE RANGE OF MUSICAL SOUNDS AN OCTAVE BELOW YOUR BASS SIGNAL. Modeled with old school and new school needs in mind, the Octamizer features independent volume controls for both the Clean and Octave sounds. This makes dialing in the exact amount of each a cinch. The two discrete signal paths also have their own tone controls that were specifically designed to enhance and expand their musical possibilities. The CLEAN TONE control uses a full spectrum tilt EQ, allowing for the boosting of treble while cutting bass or boosting of bass while cutting treble. This unique circuit allows you to create a clean sound that creates an octave doubling effect or to blend the sounds together for a great thick, snarky synth tone. *Pedal powered by universal 9-volt power supply only. Not included. Proprietary detector circuit for superior tracking Continuously variable multipole low-pass filter for Octave sound Dual filter architecture Full spectrum tilt EQ for clean sound Pedal powered by universal 9-volt power supply only. Not included. Cheers! Michael -
Hi Everyone, I’m selling my Sennheiser EW 100 G4 Wireless Instrument System with Ci1 (E Band) £400 - including UK postage I’ve used this once live and less than a handful of times in a pre-prod environment. Owned for a couple of years and it lived in a rack. Complete with all original parts, plus the extra rack components for mounting and a couple of extra right angle cables for the body pack. Cheers! -
Here’s the dimensions straight from the Aguilar website. I think it’s in inches. Hope this helps! Cheers! -
Martin bought a Swan Flight case from me. Great communication and quick to send over the payment. Hope you enjoy the case! Thanks, Mike
-
SOLD Hi Everyone, I’m selling my Swan Flight 3U Rack Case. £125 - price includes UK postage. Here’s some info 3u 2 Door Rack Case Centre sleeve depth - 300mm Sleeve Colours/Finishes - Hexagrip I’m also throwing in a locking rack draw with keys from CPC Farnell. The case has been well looked after, it’s only time outside the house was on a week long run of shows last summer. I think it mainly stayed in the van throughout. Cheers! -
SOLD Hi Everyone, I’m selling my Adam Hall PCL 10 Power Conditioner with rack lighting £95 - price includes UK postage. Here’s some of the info from the Adam Hall website: 19" rack mains socket strips 1U Number of outlets (IEC C14) - 9 Input voltage - 230 V Nominal Impedance - max 10 A The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The AH PCL 10 also has two pull-out rack lights with 5 LEDs, dimmer and automatic on and off switch, as well as a detachable LED gooseneck lamp with USB connection for the lighting of the rack. Comes with a range of M to F IEC cables Used about 5 times and it’s live in a rack for a couple of years now. Cheers! -
Problem solved if anyone cares! Bought a new HX Current Doubler - did nothing. After lots of searching through various sites found that other people had had issue with power pedals using a Strymon Zuma and Y power cables like the one for the HX Stomp. I had a look in to the Joyo but it seemed like it wouldn’t be able to handle the current of the HX Stomp. In the end I bought a Cioks DC7. Bought the extra cables for the HX Stomp and everything is perfect no issues at all. It’s a bit of an expensive fix but I just want everything powered from the same place. The Cioks DC7 is great though. Lots of options for different voltage and also the USB will be perfect for charging a GoPro or other stuff on stage! Also fits under the pedal train metro boards so more space on top of the board too! Thanks to Jakester for the help too!
- 3 replies
-
- 2
-
-
- hx stomp
- jad freer capo
- (and 1 more)
-
Hi! I use Dunlop Super Bright 40-120 Light Nickel Bass Strings (DBSBN40120) I’m not really sure how much difference string through makes, but I think I prefer it (it might get just be all in my head). -
Thanks for the advice, I’m glad I’m not the only one who’s experienced something like this. I’ve just tried swapping around the outputs and unfortunately it hasn’t helped. I’ve ordered a new power cable for the HX Stomp, to see if that helps. If not I’ll have a look at the Joyo. Thanks!
-
Problem solved - findings below. Hi Everyone, Bit of a weird one that I can’t get my head around. I’m having an issue while using a Jad Freer Capo and HX Stomp together. Both are being powered through a Strymon Zuma. The HX Stomp is using the VL HX current doubler as it’s supposed to. The Capo is being powered properly too. When both pedals are engaged at the same time there’s this whirring electrical noise (ground loop issue?) If I switch the Capo off and leave the HX Stomp on, the noise goes away. If I switch the HX Stomp off and leave the Capo on, the noise goes away too. If I use either pedal on its own but in conjunction with other pedals there are no issues. If I use the original power supply for HX Stomp, plugged in to the same 4 way (and mains plug socket) as the Strymon, and have both the Stomp and Capo switched on, there is no longer an electrical noise and everything is fine. Obviously this solves the problem, but I would much prefer to have everything on one power supply. Each of the power supply ports on the Strymon are isolated, so I thought this shouldn’t be a problem. Clearly I’m wrong. Any thoughts or ideas to potentially fix this or just to explain what is actually happening would be great. Thanks, Michael
-
Ross bought a darkglass pedal from me. Quick payment, great communication and just great to do business with! Hope you enjoy the pedal. Cheers!
-
Thanks! I also have the natural ash and the transparent white versions. They really are great, I just don’t need 3!
-
Dunc bought a TC head from me. Great communication and fast payment, everything you’d want from a buyer! Thanks again and I hope you have fun with it!
-
After much thought I’ve decided I want to keep the bass for now. Hi, I’m looking to sell my Fender American Professional II Precision Bass V in Olympic White with Rosewood Fingerboard. I’ve owned this bass from new and bought it at the end of 2022. It’s been looked after very well, in great condition and has only been on one tour. They seem to retail for just under £2000 in this colour option. It plays really well and the neck feels very similar to a Jazz V. Looking to sell as I really wanted a PBass but just get along with Jazz Basses better. I also prefer active basses. The bass comes with its original case, certificate and other paperwork. I’ve have an off white pearloid pickguard that’ll come with it. I’m based in Birmingham but will provide postage and packaging at the buyers expense. Thanks for looking! Michael- 3 replies
-
- 3
-
-
- fender
- american professional ii
- (and 6 more)
-
Withdrawn Hi, I’m looking to sell my Fender American Deluxe Jazz Bass V in black with maple neck and abalone block inlays. The controls are volume, blend, active 3 band eq, passive tone control and an active/passive switch. It takes two 9V batteries. These basses are my favourites, but I bought this as a back up for my tour rig. I currently have three of them and this one just isn’t being used really. The bass weighs approximately 4.4kg I bought this bass from Basschat in January 2024. It’s been played and toured by its previous owner and has always been fantastic and reliable whilst I’ve had it. I’ve taken it on two tours last year as a back up and have played it on a handful of shows. It’s been looked after by myself and the previous owner. There’s a couple of dings and chips on the body which I’ve attempted to photograph. I can provide more photos. It comes with the original black pickguard (I’ve placed this over the top in some of the photos) and a dark tortoise shell one which I bought to replace it because I like how they look. It also comes with the original Fender strap locks. The original Fender case has a big crack in one of the corners so I’ve replaced it with this Stagg Hardcase. If you wanted the original you can have that instead though. I’m based in Birmingham but can provide postage and packaging at the buyers expense. Thanks for looking! Michael.
-
SOLD Price drop - £135 includes UK postage Hi, I’m selling my Darkglass B3K. Well looked after and sounds great. I’m just not using it anymore. £160 price includes UK Postage. Here’s some info from Darkglass: An intuitive format that contains brutality and clarity at the same time is what the B3K delivers. A defined and powerful overdrive, with a simple layout, it sets no boundaries or rules to unleashing the desired tone. Blend Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio. Tone Controls the high frequency content of the sound. A variable low pass filter from 3kHz (ccw) to 8kHz (cw). Level Sets the volume of the overdriven signal. Drive Sets the amount of saturation in the overdriven signal. Grunt When engaged provides a massive low end boost to really thicken your sound. Mid Boost Gives a subtle 6dB boost from 300 Hz to 1kHz to help you cut through a bit more. Output Connect from the ¼” Output jack to the input of your amplifier or another effects pedal. Input Connect your instrument or output from your pedal board to the ¼” mono jack. 9V DC Only use a regulated 9V DC adapter with a center-negative plug. Dimensions Width: 75 mm / 3″ Length: 111 mm/ 4¼″ Height: 43 mm / 1¾″ Weight: 250 g / 0.55 lb Warning The Microtubes B3K has a current draw of 20mA. Only use a regulated 9V DC adapter with a center-negative plug. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty. Thanks, Michael -
Price drop - £185 includes UK postage Hi, I’m selling this set of Aguilar 5 string Jazz Bass pickups (AG 5J-HC) The pickups are brand new and have never been installed or used. £235 price includes UK Postage. Here’s some info straight from Aguilar: ‘THE WARM, PUNCHY TONE OF OUR 60'S ERA JAZZ BASS PICKUP, BUT WITHOUT THE 60-CYCLE HUM, IN A 5-STRING VERSION. Noise-free, classic Jazz Bass tone in a pickup that works great for all playing styles. Featuring our split-coil design, these pickups deliver a deep low-end, rich midrange character, and clear articulation – all with no hum! The AG 5J-HC pickup set is a direct replacement in the Fender Jazz V and many other 5 string J-style basses. Wire: 44 gauge, polyester-nylon wire Magnets: Alnico V Leads: Single conductor, heat resistant Teflon® coated’ Thanks! Michael
-
Price drop - £220 including UK postage Hi, I’m selling my TC Electronic BH800 head with Footswitch. £270 Price includes UK Postage. Here’s some info straight from TC: BH800 Tech Specs Input connector - 1/4" jack Input impedance -500 kOhm / 100pF Gain range - -96 to 41dB Tone control: Bass 50 Hz @ Gain -24 to 0 dB; 80 Hz @ Gain 0 to +24 dB Tone control: Low Mids 200 Hz @ Gain -24 to 0 dB; 160 Hz @ Gain 0 to +24 dB Tone control: High Mids 630 Hz @ Gain -24 to 0 dB; 800 Hz @ Gain 0 to +24 dB Tone control: Treble 1800 Hz @ Gain -24 to 0 dB; 4000 Hz @ Gain 0 to +24 dB Tuner - Bass Tuner, always on Tuning range - B0 (30.87 Hz) to C4 (523.25 Hz) Mute - Mutes speaker output, phones output and balanced output Master level / Headphones output Studio quality headphone amp Recommended HP impedance 32 to 600 Ohm Mains supply 100 to 240 V~ 50/60 Hz (200 W @ 1/8 of maximum output) Power module rating - 800 W Speaker output Industry-standard 4-pole twist-lock speaker connectors Balanced output - Balanced XLR, pre/post preamp Balanced output maximum +2 dBu Bal. output optimal load impedance 600 Ohm Rehearsal input 1/8” jack input, fits to iPod® Humidity Maximum 90 % non-condensing Dimensions 275 x 69 x 279 mm / 10.8” x 2.7” x 11.0” Weight 3.0 kg / 6.6 pounds Finish Brushed and anodized aluminum front plate, metal chassis Cheers! Michael -
James bought my Pedaltrain. The sale was agreed finalised almost immediately after posting the ad. Quick payment and great communication! Thanks again, enjoy the pedal board!
-
SOLD Hi Everyone, I’m looking to sell my Pedaltrain Metro 20 with hard case. Price includes UK postage. It’s been toured quite a bit so the hard case has dents and scratches all over. But it’s still strong and secure. The actual board is in good condition, a few marks but nothing that noticeable really. The loop part of the Velcro is stuck to top and bottom of the board. Comes with keys. Size from Pedaltrain website: Metro 20 Pedal Board Dims: 20 in x 8 in x 1.4 in (50.8 cm x 20.3 cm x 3.5 cm) Wt: 1.7 lbs (.76 kg) Hard Case Ext Dims: 21.25 in x 10 in x 6.25 in (54.6cm x 25.4 cm x 15.8 cm) Int Dims: 20.25 in x 8.5 in x 4.75 in (51.4 cm x 21.5 cm x 12 cm) Wt: 5.4 lbs (2.46 kg) I’m only selling because I needed a bigger board and have bought a Metro 24. I’ll re-use the cardboard box for this to ship so don’t be concerned when a Metro 24 box shows up! Cheers, Michael -
Phil bought my Markbass cab. Great communication and a joy to deal with. It was lovely to meet Phil and have a chat. Thanks again!
-
Hi, yes it’s still available. -
Ben bought my rack case. Great communication and quick payment. The whole transaction was great! Thanks again, enjoy the case!
-
I bought Ru’s Deluxe Jazz Bass. The whole process was easy and communication with Ru was great. It was well packaged and arrived the day after shipping. The bass is great, just what I wanted and I’m really happy with the purchase! Thank you!
