DIY Effects

[bremen]

8 hours ago, paul_5 said:

I came across this problem when fixing my DHA pedal - my solution was to have some solid core wire (about the same diameter as a 24 or 26 AWG multi-strand) and to strip abut 30 cm of the insulation off it. Next I heat the solder pad using a temperature controlled iron and feed the solid core through the hole in the PCB - as it travels through the hole it will pick up any errant nasties or stray wires that remain. Once the solid wire is through you should have a nice clean hole, then I used my wire cutters to chop the 'spent wire' off, leaving the rest of the reel ready for the next use. You may have to do this a couple of times, but I find that it works well in tight spaces where you can only realistically desolder the solder side of the board due to the component side being too full. 

 

Hope this helps.

Another effective variation of that is a pcb drill bit. Heat the pad, push the drill through the hole while the solders melted, then spin the drill bereeen fingers as you remove the iron to prevent the solder sticking.

[LukeFRC]

anyone got a recommended source for Lumberg mono jacks and 2.1mm DC jacks? Musikding is out!

[BabyBlueSound]

36 minutes ago, LukeFRC said:

anyone got a recommended source for Lumberg mono jacks and 2.1mm DC jacks? Musikding is out!

I'd check these:

 

https://shop.pedalparts.co.uk/product/klbm3

 

https://www.rapidonline.com/catalogue/search?Query=lumberg&Size=60

 

https://www.bitsboxuk.com/index.php?main_page=advanced_search_result&search_in_description=1&keyword=dc+socket

[disssa]

On 23/04/2025 at 00:07, LukeFRC said:

anyone got a recommended source for Lumberg mono jacks and 2.1mm DC jacks? Musikding is out!

uk-electronic.de

[bremen]

On 22/04/2025 at 23:07, LukeFRC said:

anyone got a recommended source for Lumberg mono jacks and 2.1mm DC jacks? Musikding is out!

Tried Switchelectronics?

 

[LukeFRC]

Thanks @disssa

 

@bremen - I did but it looks like that just have the unbranded power jacks  like in the picture .

 

i havd however managed to copy in a Spotify link I can’t delete of a friends band. I can’t remove on my phone so enjoy.

 

 

 

[LukeFRC]

I’ve heard some of these non lumberg ones aren’t great - anyone any experience of these from switch 

https://www.switchelectronics.co.uk/products/2-1mm-x-5-5mm-panel-mount-dc-power-socket-dc-022b

 

[admiralchew]

Interesting looking course from Neil at NRG: https://www.pedalpatch.co.uk/workshops?mc_cid=f4d8a5f6c9&mc_eid=377f14edc2

 

Given he makes one of my top three overdrives and it looks like the below inside, it may be worth a look! I think I have a clash that date but definitely sounds interesting for the future.

 

[LukeFRC]

Brian Wamplers courses online are also supposed to be decent. More circuit design than PtP primers

[admiralchew]

5 hours ago, LukeFRC said:

Brian Wamplers courses online are also supposed to be decent. More circuit design than PtP primers

I actually signed up for those in a moment of time-optimism. I haven’t started yet but I’m finally prepared to go down the rabbit hole.

[BabyBlueSound]

Scribd.com has a free trial, where you can legally download Brian's (and of course other) books in PDF.

 

I am about to read it on the train.