Jump to content
Why become a member? ×

Differing outputs/tone between basses you use


Tinman
 Share

Recommended Posts

[quote name='Crazykiwi' post='559878' date='Aug 4 2009, 06:56 AM']Just some thoughts Pete:
Do you need to use two basses or will one do?
Do you need to use two basses that sound so different?[/quote]
It's more of a desire than a necessity Steve.
The Jazz suits some stuff - the Shuker others. I'd like to have the opportunity to use them both

[quote name='cytania' post='559944' date='Aug 4 2009, 09:41 AM']Way I figure it is your backup bass is there for dire emergency. If your main bass goes horrible in the middle of a set the band won't be too picky about how you sound, so long as there is bass. I have little stickers on my amp so I never lose the sweet settings, perhaps a second set of stickers for bass two? Of course the real ultimate backup is the exact same model as your main bass.[/quote]
I'd say I'd consider them joint 1st choice basses rather than one being a backup and stickers......now there's an idea


[quote name='Mrs Tinman' post='560008' date='Aug 4 2009, 10:45 AM']I think he'd just like to be able to as required :)[/quote]
Yup


[quote name='Dr.Dave' post='560023' date='Aug 4 2009, 10:59 AM']I keep life simple.[/quote]
Have you met the Wife :rolleyes:

Link to comment
Share on other sites

I swap between my passive P and a Stagg electric upright with an active pre-amp. Both go through my Ashdown ABM. I use the passive/active button and the flat/shape button then swap instruments via an A/B foot switch. In a gig situation, that seems to manage the job fairly well. Both instruments sound so different to each other, slight variations in EQ don’t make a great deal of difference as far as the audience is concerned.

Link to comment
Share on other sites

[quote name='leschirons' post='561389' date='Aug 5 2009, 07:29 PM']I use both passive and active basses for gigs so I have an Aphex exciter in line and just switch it on when I use the passive bass.[/quote]
I have this problem .. albeit more with volume issues than eq issues .. between my Roscoe Beck V and my Fender Jazz Deluxe V at gigs. And I also use a 4 string Wal bass on a couple of down-tuned numbers and that is as loud as the Deluxe V, if not louder, so it can be and has been a real problem trying to keep levels consistent..

In a nutshell, the Deluxe V has an EBS pre-amp in it and is so much louder than the RBV that it causes me monitoring problems when I switch basses during a gig and the levels into the band's PA are affected too.. I've tried a number of different approaches to getting around it .. I've got a Zoom B2 Pedal and that works well for controlling the volume difference .. but it does add some noise to the signal chain which isn't ideal really.

I also have an Aphex exciter and that does help to provide an eq boost, but that on it's own doesn't solve the problem because the volume differential is so great. The Boss LS-2 line selector I had worked pretty well though because it provides a 2 channel facilty with the ability to boost and/or cut the volume on each channel quite drastically!

Now though, I can use the 2 channels on the Eden Metro to get around the problem without having to many problems.. :)

Link to comment
Share on other sites

I'm drifting to Dr.Dave's position. Inspired by the posts here I took my spare bass to rehearsal last night and tried it for the first run through. Sound was fine, but the neck felt wrong, then the body heft was wrong (who put that horn in my chest?), I was stuck in second gear...

Once I'd gone back to my Spea the sound was suddenly better and playing more fun. It's probably familiarity. Like meeting up with an old girlfriend and wondering what you ever saw in her.

Now I'm angling to get another singlecut and p-ex my Ibanez. Darn, darn GAS...

Link to comment
Share on other sites

How about this.....

[url="http://www.tonebone.com/re-bigshot-io.htm"]http://www.tonebone.com/re-bigshot-io.htm[/url]



[url="http://www.dolphinmusic.co.uk/product/27947-radial-engineering-tonebone-bigshot-i-o-input-switcher.html"]http://www.dolphinmusic.co.uk/product/2794...t-switcher.html[/url]


Regards

Dan

Link to comment
Share on other sites

[quote name='Bassmurf' post='561900' date='Aug 6 2009, 12:21 PM']How about this.....

[url="http://www.tonebone.com/re-bigshot-io.htm"]http://www.tonebone.com/re-bigshot-io.htm[/url]



[url="http://www.dolphinmusic.co.uk/product/27947-radial-engineering-tonebone-bigshot-i-o-input-switcher.html"]http://www.dolphinmusic.co.uk/product/2794...t-switcher.html[/url]


Regards

Dan[/quote]

Thanks Dan. That may actually be the answer......hrmmmm

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...