Lekato WS-90 manual

[StingRayBoy42]

My Lekato WS-90s came without a user manual - has anyone got one they could scan/photograph and send to me?

(I realise it'll probably say 1. plug in. 2. turn on. but I wouldn't mind seeing if there's anything else I should know!)

Ta

[Huge Hands]

Looks like you might not be missing much:
 

 

[Stub Mandrel]

The rest of what you need to know:

 

 

[Stub Mandrel]

Ws90 and 80 pair the same way.

[tauzero]

While it's not in the manual, I would like to say that you should always ensure that the one marked "Transmitter" is plugged into the bass and the one marked "Receiver" into the amp/effects chain. Failure to ensure this will result in disappointment. Or so someone told me, anyway.

[Geek99]

12 minutes ago, tauzero said:

While it's not in the manual, I would like to say that you should always ensure that the one marked "Transmitter" is plugged into the bass and the one marked "Receiver" into the amp/effects chain. Failure to ensure this will result in disappointment. Or so someone told me, anyway.

You could always colour-code them for illiterate users, or those who get such things wrong 👍

[tauzero]

On 02/07/2025 at 23:10, Geek99 said:

You could always colour-code them for illiterate users, or those who get such things wrong 👍

 

I have actually put Dyno labels with "Tx" and "Rx" onto them. However, this requires that the user actually looks at them prior to plugging them back in rather than thinking they remember which is which after unplugging them. And colour coding them would mean having to remember which colour means what, and that's not going to happen.

[Geek99]

@tauzero there’s no hope. 👍

[dave_bass5]

On 05/07/2025 at 01:53, tauzero said:

 

I have actually put Dyno labels with "Tx" and "Rx" onto them. However, this requires that the user actually looks at them prior to plugging them back in rather than thinking they remember which is which after unplugging them. And colour coding them would mean having to remember which colour means what, and that's not going to happen.

Ive got some of that day-glo tape, and have T and R in different colours. Less to think about. I also put a small dot of the relevant colour tape next to the input jack. Got all basses (😅) covered.

[StingRayBoy42]

Lekato sent me the manual - as I suspected it's pretty much 1. plug in. 2. turn on (3. make sure they're on the same channel) but I've attached it for anyone who wants it.

It does GENIUNELY say attach the transmitter to "guitars, mussels, blowtorches etc" - I would strongly advise that you do not attempt to attach it to a mussel or a blowtorch.

Anyone who can't work out that the one with the picture of a guitar on goes in the (Bass) guitar and the one with the picture of the speaker on goes in the amp (even with dymo and/or colour coded labels attached) should present themselves to their nearest freelance vivsectionist, police station, glue factory or tannery.

I will ABSOLUTELY plug them into the wrong things at my next gig.

WS-90 USER MANUAL M01582N.pdf