Question about Trace Elliot ELF

[Dien_Verstraete]

Hello,

I have been using my Trace Elliot ELF amp for the first time last weekend on a smaller gig, as I have been using it for rehearsal. When we connected the DI to the PA-board, the speaker output didn't work anymore ... Does anyone know if that is the standard setup of the ELF? I couldn't find it in the manual. So, it looks like it is OR speaker output OR DI out, but not both together ... Is that correct? I guess that problem doesn't exist on the TE-1200, as I am considering to buy a TE-1200. Would be great to find out the answer. Can anyone help, pls? Thank you so much!! Cheerz

[Suburban Man]

I used an Elf for a while, DI output didn’t affect speaker output at all, 

[Jean-Luc Pickguard]

I have an elf incoming. I'll check this also

[King Tut]

That’s not working properly. They should both work together. I’ve gigged one a few times with a cab and di out.

[Stub Mandrel]

You aren't taking the di signal from the headphone socket by any chance?

[King Tut]

8 hours ago, Stub Mandrel said:

You aren't taking the di signal from the headphone socket by any chance?

There’s not a headphone socket on these Stub

[King Tut]

Dumb question, but when you plugged into the board are you sure you had the volume AND gain controls turned up? Was your speaker lead connected both ends?

[Woodinblack]

47 minutes ago, King Tut said:

There’s not a headphone socket on these Stub

 

There certainly is, its on the front on the right, opposite the jack and conveniently obvious enough to occasionaly plug in accidently!

[Stub Mandrel]

1 hour ago, King Tut said:

There’s not a headphone socket on these Stub

 

Err...

 

 

[King Tut]

11 hours ago, Stub Mandrel said:

 

Err...

 

 

 

That'll learn me!!