Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Help please - Ampeg Portaflex vs RM Cab - Can someone smell burning?


stuckinthepod
 Share

Recommended Posts

I've recently bought a RM Evo 2 112 cab. It is rated at 300w at 8ohms. I have been running at Ampeg Portaflex 350 which delivers 250w at 8ohm in to it. The ampeg has been cutting out and last practice there was an electric short burning smell from the Ampeg as it cut out and I switched it off sharpish.

 

The Ampeg thankfully still works fine and has always performed well with a bigger 410 400watt rated 8ohm cab and zero issue.

 

Is the issue that the cab is not correctly rated or is the Ampeg overloading?

 

Any help appreciated ?

Link to comment
Share on other sites

I had this with the second PF500 I had, happened on the first time I used it (connected to a Barefaced Compact & Midget so not an issue re the cabs). That was my journey with the PF range over, shame really as the first one I had was great, no issues at all.

Link to comment
Share on other sites

Your Ampeg has just about bit the dust. Aka one foot in the grave. Aka on its last legs.

 

I reckon a fault in the cab would have sent the sound bad before the amp quit. Quid pro quo, the amp went toaster mode of its own accord.

 

It's a mystery to me how it reset and continues operating after letting out magic smoke.

Link to comment
Share on other sites

First of all the cab is correctly rated. It should be fine with your amp. if all else is well.

 

Secondly unless the speaker cab is shorting out it is unlikely that the cab ort he speaker lead (which you might want to check) is responsible. The amp should turn itself off if there were anything wrong without causing problems other than temporary silence. There shouldn't be a smell of burning which is more likely to be an indicator of a failed or failing component inside the amp.

 

if the amp is now working then all that has happened is that the protection circuits have taken over and switched the amp off for you, removing the power and letting the amp cool down has allowed it to re-set. It may be something as simple as a faulty joint sparking but something is wrong and I'd get somebody competent to have a look.

 

Good Luck

 

 

  • Like 2
Link to comment
Share on other sites

58 minutes ago, stuckinthepod said:

It was the cab. Opened it up and burning smell present inside. Cab just makes a quiet, buzzy sound now, it is most definitely dead. I'm returning it for a refund.

I wouldn't be too sure about that. Burning up a cab is usually user error, even if it is initiated by unrealistic marketing expectations and a lack of background knowledge.

 

When you turn up and it doesn't get louder you should turn it down some. If you don't it will heat up and can burn up if you lay into the bass for too long.

 

If it ever seems quieter but you turn up some more that is when you burn it.

 

The getting quieter is the driver motor getting hot and increasing resistance. Turning up instead of down makes a runaway condition where the increased voltage makes it hotter still and soon it is very very quiet.

 

Ratings are only a very rough guide to selection for purpose.

  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...
On 28/02/2022 at 19:10, Downunderwonder said:

I wouldn't be too sure about that. Burning up a cab is usually user error, even if it is initiated by unrealistic marketing expectations and a lack of background knowledge.

 

When you turn up and it doesn't get louder you should turn it down some. If you don't it will heat up and can burn up if you lay into the bass for too long.

 

If it ever seems quieter but you turn up some more that is when you burn it.

 

The getting quieter is the driver motor getting hot and increasing resistance. Turning up instead of down makes a runaway condition where the increased voltage makes it hotter still and soon it is very very quiet.

 

Ratings are only a very rough guide to selection for purpose.

Ratings are only a very rough guide to selection for purpose. 

 

So it would seem!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...