Jump to content

*SOLD* REDDI Tube Direct Box - £425
£425
Swindon, Wiltshire


Recommended Posts

Hi folks,

Here's a great piece of kit... REDDI Tube Direct Box. It was great for recording - and, coupled with my Aguilar DB751 (selling here) and Bergantino NV412, (selling here) an unbeatable combination live.

  • No trades.
  • Bank transfer preferred (I'll provide bank details in private message).
  • £425 including postage within the UK. For price outside UK, please message me.

Cheers!

Steve

IMG_1060.thumb.JPG.647bddee51f3b43d82221e9c96cb6792.JPG

IMG_1061.thumb.JPG.75a9c64106cc817c444343225af57394.JPG

IMG_1062.thumb.JPG.ad8145fd414047508f4a0fca26402f80.JPG

"The number of A-Designs REDDI's in use on stages and studios all over the world is nothing short of staggering. Quite simply, there just is no better sounding way to convert an instrument or line level signal to XLR. Designed with the help of  top studio engineers and bass players, REDDI has been widely praised by engineers and bassists all over the world as the  best-sounding DI solution on the market today. It is important to note that the REDDI is not a high-gain device! Its gain structure has been painstakingly engineered to avoid the slightest compromise in sound quality. Inspired by the glorious sound of the Ampeg B-15 tube bass amp, REDDI’s 6N1-P  tube-driven amplifier feeds signal directly into a hefty custom output transformer by Cinemag – a key component to providing  a harmonically rich tone."

  • All-tube direct box with custom output transformer.
  • Ultra wide frequency range (20Hz-60kHz).
  • Neutrik input connector, balanced XLR out, and 1/4'' thru jack
  • Inspired by the Ampeg B-15.
  • Clean and airy high end, warmth, transparency, and ultra high-quality sound.
  • Level control.
  • Ground lift.
  • Ultra bright blue LED on/off lamp.
  • Zero-feedback loop design.
  • Massive, custom-wound transformers.
  • 6N1P tube
  • Low-Z, transformer-balanced output.
  • Frequency Response 20Hz - 60kHz
  • Input impedance: 1M ohm
  • Gain range: 16dB
  • Noise (EIN): -126dB
  • Output impedance: 600 ohm
  • Maximum level: +22dBu
  • Distortion THD: > .08 @ 1kHz
  • Power Requirements: 100/120/230VAC - 42W
  • Dimensions (W x H x D) 3-1/2 - x 3-1/2 - x 14-1/2
  • Weight 10 lb. (4.54 kg.)
     
Edited by mildmanofrock
  • Like 3
Link to comment
Share on other sites

  • MB1 locked this topic
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...