Dandelion Posted August 5, 2017 Share Posted August 5, 2017 (edited) [url="http://ibb.co/gRBNPv"][/url] [url="http://ibb.co/iP8GHF"][/url] [url="http://ibb.co/f2zdWa"][/url] [url="http://ibb.co/en8u4v"][/url] [url="http://ibb.co/jF8SPv"][/url] [url="http://ibb.co/c5a7Pv"][/url] [url="http://ibb.co/fSkkBa"][/url] Warmoth Gecko 6. One piece solid mahogany body. 35" scale length 5 piece flame maple neck with dual truss rods. Seymour Duncan Active soapbars ASB6 x2. Kahler USA Bridge with adjustable string spacing. Gotoh Tuners. New Fender Strings. Currently wired in a Volume, Volume, Tone configuration via a Kiogon wiring loom. The microswitch and one of the pots are not currently wired up to anything, but they are of the correct specification should the user wish to install the Seymour Duncan active tone circuit. There is also evidence that a midi pickup was once fitted behind the bridge pickup. The tiny holes which were filled before I received the bass can still be seen on the photos and don't detract from the appearance of the instrument. I use the bass in its current Volume, Volume, Tone configuration without the optional tone circuit. The bass however still requres a single 9V Battery to power the Active Seymour Duncan Bassline Pickups. The bass has no disappointing damage to neck or body, but it is a used instrument, I am not its first owner. The control cavity cover has a thin shard of veneer missing which exposes the plastic plate underneath. I have considered taking all the veneer off to leave the cover uniformly black, but will leave it to the next owner to decide. This is a Warmoth Bass so it is constructed from top quality USA parts, It is a beautifully solid instrument. Ideally, I am wanting a maple boarded Fender Precision, MIM is fine if immaculate, I would bite your hand of for a Roger Waters. Black RW combo also considered. Xx Edited August 27, 2017 by gary mac Link to comment Share on other sites More sharing options...
binky_bass Posted August 5, 2017 Share Posted August 5, 2017 Saw this on eBay... was tempted but sadly no funds for more basses! Link to comment Share on other sites More sharing options...
Dandelion Posted August 5, 2017 Author Share Posted August 5, 2017 Yep, I wanted to raise enough for a new Fender Precision. Alas, not to be. Perhaps I should have let the auction run a bit longer. Link to comment Share on other sites More sharing options...
GBH Posted August 24, 2017 Share Posted August 24, 2017 Still available? Link to comment Share on other sites More sharing options...
Hellzero Posted August 25, 2017 Share Posted August 25, 2017 Usual questions : weight, strings spacing at nut and bridge ? Thanks. Link to comment Share on other sites More sharing options...
Dandelion Posted August 26, 2017 Author Share Posted August 26, 2017 Arrgh.. Sorry folks. This has gone. I apologise... Link to comment Share on other sites More sharing options...
herbass Posted August 27, 2017 Share Posted August 27, 2017 Perhaps you could put that info in the title? Link to comment Share on other sites More sharing options...
Recommended Posts