Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Squier Affinity P Bass Re-finish


Bigjas
 Share

Recommended Posts

Having built my first Bass from scratch, I thought I might try my hand at re-finishing an existing one. So when I was offered a second hand Squier Affinity P Bass, I thought I would give it a go. The Bass is a 2005 (stamped on the neck) and had clearly not been looked after. The frets were grooved, the body had a lump out of it near the input jack, the pots were scratchy when turned, neck was quite dirty, clearly not loved.

[url="http://www.flickr.com/photos/87323611@N03/9215622286/"][/url]
[url="http://www.flickr.com/photos/87323611@N03/9215622286/"]IMG_2222Cropped[/url] by [url="http://www.flickr.com/people/87323611@N03/"]bigjas42[/url], on Flickr


So the plan was to strip it back to just the timber and then upgrade all the components. Looking through hundreds of pictures I decided I would like a white body, black scratch plate and white headstock. All the hardware would be black, along with the strings. I didn't see many like this so thought it would be something different.

First job was to take it all apart and start preparing the woodwork. I used a sander and lots of elbow grease to get a decent base to work from.

[url="http://www.flickr.com/photos/87323611@N03/9215607294/"][/url]
[url="http://www.flickr.com/photos/87323611@N03/9215607294/"]IMG_2247[/url] by [url="http://www.flickr.com/people/87323611@N03/"]bigjas42[/url], on Flickr

Then the primer coats were sprayed on. I am using automotive rattle cans to paint it. I will upgrade and get some decent spray equipment in the future, although I have got quite a good finish by spraying plenty of thin coats and flattening it off between coats.

[url="http://www.flickr.com/photos/87323611@N03/9212831015/"][/url]
[url="http://www.flickr.com/photos/87323611@N03/9212831015/"]IMG_2249[/url] by [url="http://www.flickr.com/people/87323611@N03/"]bigjas42[/url], on Flickr

[url="http://www.flickr.com/photos/87323611@N03/9212829747/"][/url]
[url="http://www.flickr.com/photos/87323611@N03/9212829747/"]IMG_2251[/url] by [url="http://www.flickr.com/people/87323611@N03/"]bigjas42[/url], on Flickr

I have put my logo on the headstock and cleaned up the fretboard. I have re-oiled it and dressed the frets.

[url="http://www.flickr.com/photos/87323611@N03/9215603910/"][/url]
[url="http://www.flickr.com/photos/87323611@N03/9215603910/"]IMG_2295[/url] by [url="http://www.flickr.com/people/87323611@N03/"]bigjas42[/url], on Flickr

I have put Wilkinson tuners on. They are too big for the Squier headstock so need filing down and touching up with black paint.

[url="http://www.flickr.com/photos/87323611@N03/9215592766/"][/url]
[url="http://www.flickr.com/photos/87323611@N03/9215592766/"]IMG_2336[/url] by [url="http://www.flickr.com/people/87323611@N03/"]bigjas42[/url], on Flickr

The scratch plate is 3 ply, the volume and tone knobs are black aluminium, Black bridge, black strap buttons, new pots and input jack, and new Tonerider pickups.

[url="http://www.flickr.com/photos/87323611@N03/9215580190/"][/url]
[url="http://www.flickr.com/photos/87323611@N03/9215580190/"]IMG_2368[/url] by [url="http://www.flickr.com/people/87323611@N03/"]bigjas42[/url], on Flickr

And the finished Bass is just what I wanted. I have set it up and its had its first gig. I am really pleased with the finish and the sound. The new pickups are much better than the stock Squier ones. I like the DR Black Beauty strings too.

[url="http://www.flickr.com/photos/87323611@N03/9212785743/"][/url]
[url="http://www.flickr.com/photos/87323611@N03/9212785743/"]IMG_2401 Cropped[/url] by [url="http://www.flickr.com/people/87323611@N03/"]bigjas42[/url], on Flickr

More pictures [url="http://www.flickr.com/photos/87323611@N03/sets/72157634496323236/"]HERE[/url]

Jas

[url="http://jasebass.webs.com/"]http://jasebass.webs.com/[/url]

Link to comment
Share on other sites

  • 4 weeks later...

That looks very cool , well done mate . Ive just bought a set of Toneriders for my , ahem, project , what's the sound like ? I've also got black tuners and bridge which I'm going to give a thin coat of Hammerite !

Edited by mike 110
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...