Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

de afwerking mk3-6 - A build diary.


blablas
 Share

Recommended Posts


Drilling the position markers with the use of a drilling template.


And glued in the markers, normally I use aluminum rod for these but for this bass I wanted wooden ones, I used toothpicks for them because they have the right diameter. Edited by blablas
Link to comment
Share on other sites


Machined two radiuses at the end of the neck.


Machined the neckpocket and pickup holes.


And the coming together of the two (not yet glued), the neck has a perfect fit in the body and needs to be pushed in with a reasonable amount of force and already stays in place by the way it fits. Edited by blablas
Link to comment
Share on other sites

Sanded the fingerboard up to grain 600.
[IMG]http://i.imgur.com/wDNNUP3.jpg[/IMG]
Hammering in the frets.

[IMG]http://i.imgur.com/xrdL25N.jpg[/IMG]
And done.

Now I still need to glue the fret ends, then finish the sides and level the frets, crowning and polishing will be done after the neck is fully shaped.

Edited by blablas
Link to comment
Share on other sites

It's done to hold the frets really tight in place, even though the fit in the groove is already okay, it's just a extra measure.
This will also fill any visible holes between the fingerboard and the frets.

I use cyano acrylate (funny glue) for this, it will creep in the left over space between the fingerboard and the fret due to capillary effect and if done properly will fill the entire grove.

I prefer a flat fingerboard so there is no radius to follow. :)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...