Roland Rock Posted August 14, 2012 Share Posted August 14, 2012 (edited) I have a few bits lying around which were originally acquired for a quirky furniture project which was abandoned. There is a neck and red body from a Yamaha 4 string, no hardware. GONE There's also a J shaped body. This is definitely an amateur job. Pine body with wenge top. Again, no hardware. In fact I'm not even sure there's a neck socket! Collection only from Bulwell, Nottingham. Edited September 17, 2012 by Roland Rock Link to comment Share on other sites More sharing options...
neepheid Posted August 15, 2012 Share Posted August 15, 2012 What kind of Yamaha bass is/was it? Link to comment Share on other sites More sharing options...
alyctes Posted August 15, 2012 Share Posted August 15, 2012 BB450. My diagnosis was that the trussrod was maxed out, but I am a n00b and may have got it wrong. I've got most of the hardware still. Link to comment Share on other sites More sharing options...
rubis Posted August 15, 2012 Share Posted August 15, 2012 I'd like the Yamaha bits please if they're not already taken Link to comment Share on other sites More sharing options...
Roland Rock Posted August 15, 2012 Author Share Posted August 15, 2012 Yes, Alyctes kindly sent these to me when I had ideas about making quirky tables from old bass bodies. Since then, my designs have gone in quite a different direction, and quite successfully so. Consequently I don't think the bass table thing will happen. Rather than have these sit in my workshop, I thought another BCer should have the use from them. Yamaha bits now gone to the turnip-headed Gibsonphile Link to comment Share on other sites More sharing options...
JJ Bass Posted August 26, 2012 Share Posted August 26, 2012 Hi, Interested in what you have left - PM me! Link to comment Share on other sites More sharing options...
Roland Rock Posted August 27, 2012 Author Share Posted August 27, 2012 iPad won't let me initiate a PM. Why not PM me? The wenge faced body is left. Strictly pickup only Link to comment Share on other sites More sharing options...
tommorichards Posted September 15, 2012 Share Posted September 15, 2012 do you have any pictures? Link to comment Share on other sites More sharing options...
Roland Rock Posted September 15, 2012 Author Share Posted September 15, 2012 I'll take some and post them up on Monday Link to comment Share on other sites More sharing options...
Roland Rock Posted September 17, 2012 Author Share Posted September 17, 2012 (edited) OK - as requested, some pics: As you can see, it's an inverted body. The new owner may wish to undergo some inversion reversal work ;¬) Routs are rough and ready. There's a slight saw overcut near the neck The joins seem structurally sound, but not seamless aesthetically The neck pocket is 15mm deep! Edited September 17, 2012 by Roland Rock Link to comment Share on other sites More sharing options...
Roland Rock Posted September 17, 2012 Author Share Posted September 17, 2012 This has now GONE Link to comment Share on other sites More sharing options...
.gif.9ad672bb8b84505709f76b39c8c256ec.gif)
Recommended Posts