Jump to content

hen barn

Members
  • Content Count

    419
  • Joined

  • Last visited

Everything posted by hen barn

  1. Ashdown after eight 15w bass amp combo Fantastic practice amp. Has line in for iPhone play along etc. Can be very loud for small amp and you can add extension speaker collection from Brighton
  2. Carlsbro stingray bass combo Free to collector I picked this up free with a bass yesterday. no use to me he said it just needs a fuse????? im in Brighton!
  3. Sound and plays lovely! I have never been a p bass man but this is a keeper! thanks again
  4. Finished!!!!!!! thanks everyone for your help! steve
  5. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  6. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  7. I don’t know what pick ups they are? Let me know if you have a wiring loom , I will buy it off you cheers steve
  8. Me again, just putting it back together and the wiring a bit of a mess? It’s not standard p bass wired so do I just replace all the wiring and pots and Input?
  9. Thanks everyone for your help. It does look like there might have been a silver series on the headstock but the punk had Sticker on it so might have come of when I originally started work on it 4 years ago!
  10. I got an old Squier Off a old punk a couple of years back that was pretty knackered and been painted Matt black. So during this awful time I have finally started doing it up. It’s a Japanese Squier precision bass with the serial number M039366 I have stripped the Matt black off (what a nightmare that was) and now tru oiling the body. my question is when was it built? Are they any good? I have seen a couple of JVs on here for big money, is this worth anything? the plan is to make it look like a vintage p bass what do you think??
  11. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  12. Seen videos on c4 but not just a synth bass as on PYT Micheal Jackson
  13. This post cannot be displayed because it is in a forum which requires at least 1 post to view.
  14. Hi , did this work? I have the same problem with my tecamp puma 900. I have a short lead going to my mixer. Is it as simple as unsoldering pin 1?
  15. Hohner the jack bass guitar project In need of a bit of TLC I brought this a while ago as a project but haven’t got the time at mo. A few marks on it Jack socket needs replacing (very loose) Needs 2 screws on front pick up. I think it all works ok but hard to test as jack socket makes it cut out. Action looks great! So if you have some spare time grab yourself a bargain!
  16. Don’t suppose there is any sound clip/you tube of this bass?
  17. I teach kids at my local school. Some one them could do with better strings but can’t afford them. Always welcome to take them off you. A boil up and they will sound much better! = happy you bass players!
  18. Gator shallow rack case 4u in excellent condition I House my amp and wireless for the last few months. No longer needed collection from Brighton or you organise couriers
  19. Thanks mate, yes they are awesome amps. I had a 250 but this is another level!!
  20. 10 x 2 Roto Rack/Mixer Console Model: 1SKB-R102 Fantastic lightweight case Very hard to get hold of in the UK My desk etc not included The spec 10 x 2 Roto Rack/Mixer Console Model: 1SKB-R102 The 1SKB-R102 is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece... Exterior Length: 23.50 in (59.69 cm) Exterior Width: 23.50 in (59.69 cm) Exterior Depth: 14.50 in (36.83 cm) | The 1SKB-R102 is a 10U slanted top and 2U front, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear. Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking in transport and storage. Features * 10U Slanted rackmount on top * 2U rackmount in front * Steel threaded rails * Hard lid and doors * Side access ports for cable routing * Injection molded front and rear doors and lid * Two TSA locking patented trigger latches * Stackable for storage and transport Specifications Exterior Length 23.50 in 59.69 cm Exterior Width 23.50 in 59.69 cm Exterior Depth 14.50 in 36.83 cm Carton Length 24.00 in 60.96 cm Carton Width 24.00 in 60.96 cm Carton Depth 15.00 in 38.10 cm Rack Space Units Top 10 10 Rack Space Units Bottom 2 2 Rack Depth Front Rail to Back Lid 0.00 in 0.00 cm Shipping Weight 23.00 lb 10.43 kg Product Weight 19.80 lb 8.98 kg The top rack has 17.5" rackable depth plus 2.25" in back for cables for a total of 19.75" on the top. The lower 2U Rack is 3.5" high in front and 5.75" high in the rear with a 19.5" of useable depth
  21. Ashdown 220 touring bass combo Sound great but the MID knob has sheered off . It still works as you move it with screwdriver. I’m having a clear and can’t be bothered to fix it. Here’s the spec First heard in the 427 Small Block, Ashdowns Dual Tube bass preamp was an instant hit, thanks to its solid, articulate bottom end and sparkling highs. Now it forms the front end of the Touring Series combos to deliver tube tone without the price tag. It features solid construction, a quality speaker and a 220 watt power stage. Great-sounding amp, presentable in any professional playing environment. This one features a 12" speaker.
  22. Hohner The Jack headless bass guitar With a maple body and matching neck. “The Jack” has a natural finish, with a rosewood, 24 fret, fingerboard and truss rod. All of the hardware is in black, with 2 EMG Select humbuckers and the licenced Steinberger bridge/tailpiece. There is an active on/off switch powered by a 9v battery, 1x tone control and 2x volume controls. Everything works as it should. It has a few nicks and scratches, all indicated in the images but apart from that a lovely bass I have 2 of these which I use as back to my status kingbass. I Need a new amp so selling one. Spec · Neck wood: Maple · Body: Maple · Neck joint: Through neck · Fingerboard: Rosewood · Radius: 12” · No Frets: 24 · Profile: C · Nut: Zero-fret · String tree: n/a · Width at nut: 39mm · Width at 12th Fret: 53mm
×
×
  • Create New...