Chopthebass

5 hours ago, YGBASS said:

@ChopthebassMagnific !  I like this bass

 

And the COBRA too !  Is your's ? 

Thanks! Yes the cobra is mine! Do I show a photo somewhere then? 

On 24/11/2021 at 10:26, Reggaebass said:

The fingerboard looks incredible, is that veneer 

Nope, 1/4” camphor burl, hardened before fret install 

On 24/11/2021 at 09:15, benh said:

Looking great! How did you do the black fade around the edges if I may ask, airbrush? 

Thanks! I started with clear lacquer everywhere, maybe two coats, then I used a detail gun with a 1mm tip and sprayed more clear tinted black, around the border, with the ash masked.

I got the burly bass finished. Well, apart from one gold knob. Wood covers worked out well but I may change the pickups and preamp. EMGs need to be super close to the strings compared to other pickups, and having a wood cover, albeit 1.5mm, I feel this hinders the clearance required. The custom preamp pots have values that are specific to EMG, which is why that may need to be swapped out. It’s all good fun though! 

How many basses is too many??  Sorry I don't understand the question 😄

5 hours ago, Chienmortbb said:

The range at Crimson includes oil based fiinishings that are superior to Tru Oil. They also have a number of other options and are made in the UK.  Of course that does not help if you are based in Canada.

I’m not the one seeking help! But thanks for the info. If I was still in the uk I’d be using Morells products. 

41 minutes ago, benh said:

Cheers. One of the nicest black fades I've seen with burly wood

Thanks I appreciate that 

43 minutes ago, Reggaebass said:

The fingerboard looks incredible, is that veneer 

Nope it’s camphor burl. It was a little too thin so it is laminated to a layer of black walnut. The join is hidden by the binding

1 hour ago, benh said:

Looking great! How did you do the black fade around the edges if I may ask, airbrush? 

I have a detail gun, and just sprayed tinted lacquer, set low

As tempted as I am by blue pickup covers 😆 I decided to stick with the matching wood ones! 

I can see a bit of Marleaux Diva in it. Looks cool!

3 hours ago, Richard R said:

Love the blue pickup covers!

 

Oh, wait...  🤦‍♂️

Haha! That would be an interesting look 😆

I decided to add a faded black outline to give more contrast with the ash. A couple more coats to go.

Crystalac is the best water based lacquer in my opinion. Another oil option is Tru-Oil. It goes rock hard like lacquer, but is super easy to apply. Many videos out there.

1 hour ago, Peter-Loke said:

How did you cut the neck?

I made neck template using the Shaper. Then made the neck in the usual way, with bandsaw and overhead router

Just seen a Japanese BB1100s for sale and it’s giving me GAS! I remember as a kid the bass player from Chaz and Dave had one and I loved the sound. I would point out that my parents were watching! I wasn’t an avid fan! 
I wonder if the 1100s is still a desirable bass? 

17 minutes ago, benh said:

Amazing - I get the feeling a few of us around here will be green with envy when this is done!

Thanks ! Well it will be for sale 😀

Waiting on the custom preamp before doing control holes. Threaded inserts installed for pickups and control cover. 
A couple of sealer coats and headstock decal applied. 

Great info there Andy. There is also a trend to leave voids in the finished surface. Mayones and others do a ‘raw’ finish. I haven’t tried the slurry method as I don’t often use tru oil but sounds like a great solution.

6 hours ago, Stub Mandrel said:

 Perhaps if a mod could move to build threads?

 

@Jabba_the_gut

@Chopthebass

@Rexel Matador

 

Hey, I haven’t used tung oil, but I have used Tru-oil. It’s described as a gunstock oil, but it’s used by many guitar builders. It can be applied and buffed to a lacquer like finish, or easily made to look satin. I apply thinned 50/50 with thinners, and apply many thin coats. You have to be patient and allow 24 hours between coats, and rub with 0000 wire wool too before each coat. If you need a satin look, you just need to use 0000 after your final coat has cured. I usually let that last coat cure for 3 or 4 days before buffing with the wool. 

Staining burl wood doesn’t always achieve what’s in your head. I find it absorbs stain at different rates and can be blotchy.  I have done it using Kedo powder stains (water based), but I now tend to seal the wood, apply a few clear coats, and then apply tinted lacquer to get where I need to be. Then clear coats to finish off. 

Nicely done! 

2 hours ago, Jabba_the_gut said:

Absolutely beautiful choice of timbers and stunning work.

Thank you sir 

1 hour ago, Hellzero said:

And so is the magnetic battery backplate...

Ah, if you are referring to the video of the battery cover, then that doesn’t match grain at all. It’s cut from a separate piece of alder for two reasons. It’s going to be a painted bass, and it’s a solid body. With a solid body I can’t cut a drain matching cover. 
But the burly bass has a rear ash cap, and the grain does match.

5 hours ago, SpondonBassed said:

 

It seems odd to have a scarf joint there.  What's the reason for that?

It’s a good way to use lumber that isn’t long enough haha! Check out Grainger guitars. He cuts his neck inserts an accent and then glued back together. Just for looks. And Shuker does a similar joint. I just didn’t want an accent piece. I like how the laminates just stop. 

2 minutes ago, Chopthebass said:

I might need to rotate the front one. The back pickup is correct way round

Haha ignore my reply! They are both wrong way round! But it’s only mocked up. Here is the correct way round.