moley6knipe

@gorandelac - nice board. Morningstar for the win! 

Blue is niiiice. 

Great choice. Brilliant colour. Massively under rated are these basses. As has been said I also get why they didn’t sell - wasn't because they’re not good.

The asymmetric neck profile is so right: a proper epiphany for me. The quality and parts are great. I’m an 18v active 3 band and dual buckers guy so this is spot on, the coil taps are a nice bonus. The EQ is doubtless not the best on the planet but the range and EQ points are fine.

Does it sounds like a ‘Ray? Still no, coz really and properly only 2 band EBMM ‘Rays with parallel alnico pickups really sound like ‘Rays IMHO 😀

Does it sound like a P? Not really, no.

Does it sound like a J? Yeah, you can get close enough.

Do all of the switch positions produce great sounds that are a bit Fender but their own thing really? Yes!

Does the front pup with mid boost reasonably hard into a good comp and then a GK sound utterly perfect to me? Yes!

It’s bright: mine’s wearing 1.5 yo round D’addario Nickel XLs and they still sound good to me. Previously I used to change (steel rounds) like every 4th gig. And it’s been well played at home during lockdown of course 😎

My 2014 Deluxe USA HH fiver… 10lbs on the nose, and being treated to a replacement brown tort four ply guard from WD at the end of August!

1 hour ago, jimbobothy said:

… yet another board finished. A Nano Max this time, very basic but should be useable I think.

I’ve gone for less cable tie mounts than usual as it gets too laborious when you inevitably change things up ha ha 😁

 

The IEC extension cable is a good idea, even where the socket is accessible, to take the strain off the PSU itself.

I need to find a really short right angle (in my case can only be angled in one way else it won’t work) female to male IEC. Worst case chop the plug top off an existing right angle and put a rewireable IEC male on there… but over the years I’ve yet to find a rewireable one that doesn’t suck!

Oh these things are AMAZING!! I had one of thee years ago with the wooden box. GLWTS!

Sweet Lord. That’s my most perfectest  Jazz that I have ever seen. I’ll be in touch after the draw!

@AJ567 - that’s next level ‘boarding, my hat is off to you. The GigRig stuff is great - I snagged a 2nd hand isolator which lets me split a 500mA out on my CS7 to four of my pedals. Great solution!

Back on topic though: I’ve yet to go class D / small but when the current big iron box goes bang it’ll be class d for sure.

In my head this will be: killer preamp pedal (preferably that allows MIDI control) into a class D power amp that gets me 350w or so at 8 ohms.

The problem with this is that the mixing desk sits on top of the RB + flight case nicely at the moment and I won’t want a full size 3U case holding a tiny amp 🤔

3 minutes ago, chris_b said:

I usually buy amps that sound just right with all the controls between 12 and 1 o'clock. Then I only have to worry about the volume. I can't think of anything more simple to manage.

Gallien Krueger for the win here… I have loads of knobs on my RB and they’re all flat / off because it sounds soooo good! 😂

Ignore the overall price, it’s from the original ad, does anyone want any of these bits type bump!!

Same for me with the C4 - it’s replaced octave fuzz and filter pedals AND it can make any synth noise I could conceivably use. But it does need MIDI and setup time for sure. If you can add one using your setup, I’d recommend adding an expression pedal for even more fun!

I’ve started making some nasty fuzz sounds, investigating foldover options. I want to make some chordy things for some song intros. And a sequencer. And. And. And…

2 hours ago, shoulderpet said:

Is the red one, I hate white pickguards as they look so cheap, also I felt that as it was such a lovely colour it seemed a shame to have such a cr*p colour pickguard, the black pickguard was a huge improvement

That IS a nice red. Looks great with the black and maple. Never played an Ibby I didn’t like. My old BTB will need to be buried with me. Too heavy to use any more but it’s a good ‘un!

Right. We’re going with brown tort - @Reggaebass takes the points for this round. Genuine thanks for all the input folks… I love the fact that other people in this world care about the small (but important!) stuff.

If anyone with experience of WD ‘guards knows what “clear removable masked top” means then please enlighten me! I guess “protective, removable covering to protect it in transit”?! I’ll mail them. Now to check thickness and bevel angle… who knew?!

wdmusic

“Made from four layer faux brown tortoise PVC material consisting of faux brown tortoise shell/cream/black/cream with a clear removable masked top. Thickness .110 in./2.79mm.”

As a confirmed Dimension addict of a few year’s standing a sticker would be useful for me. Still can’t remember which position is inner or outer single coils.

Its important to know: my (non-existent at present) audience can really hear the difference when the band’s playing 😂

I guess so yeah. You never know though: gotta be worth an email to fender to ask?

Lovely to see so many dimensions on here! I’m a massive fan… I just can’t stop touching it! 😲

So far I think my order of pref is now:

1. brown tort

2. black

3. Red tort

4. Black pearl 

Hmm. Need to make me a gallery. Wish I had photoshop and the ability to use it! 

1 hour ago, Reggaebass said:

Just to add, it can also depend on the tort, I had one on a natural jazz and it didn’t look that good because it had too much red, I changed it for a darker red/brown tort and it looked great 

True enough. Get the impression WD’s are more red than brown.

Oh VERY nice. I’m leaning towards plain black now!

Thanks folks!! White Pearl is a good shout too. Black’s what most folks change these to judging by results of web search. Hmm

WD do a nice black abalone too. 

I’m being THAT guy. I love this bass more than oxygen but the white scratchplate isn’t sexy enough.

So a Tort guard from WD would be sexier, right?? Am I right?

Page 5 (Elite / Deluxe) basically the same.

Fender American Elite Dimension Bass IV HH 019290XXXX Service Manual REV A 1-15-16.pdf

47 minutes ago, NicoMcJ said:

Dusted, cleaned and fresh velcro. Hopefully it doesn’t look quite so much like my “last gig was in a quarry”! 😂😂
 

Red Velcro!! Very nice, hadn’t thought of that. Gonna go with “not black” next time mine needs a refresh, LIKE this!!

Aye. There’s much about the editor that could be improved. The save as dialogue needs to be bigger by default; once you’ve typed something into search being able to press enter to execute rather than having to click a button etc. But it’s not SA’s core field of expertise so I guess it is what it is. Luckily, programming the sounds themselves is pretty easy.

One hint - when you’re tweaking sounds, get a cheapie looper to sit in front of the C4 so you keep your hands on the mouse! The lekato that’s like £30 on eBay works for me for this!

That’s the method unfortunately 

8 hours ago, Quatschmacher said:

That’s not true - if you’re using MIDI over USB then you can send PC messages to the C4 via its USB port to directly access its internal presets. 

I stand corrected, my bad!