Jump to content
Why become a member? ×

Simo

⭐Supporting Member⭐
  • Posts

    126
  • Joined

  • Last visited

Everything posted by Simo

  1. Reduced to £130 including postage.. or £175 for both the bridge and the Richter MX2 blend control.
  2. Richter BassXX preamp. Previously fitted to 1 pickup bass, so there's no balance pot included. You can either use a standard passive balance control, or I have an active Richter balance pot available separately (click here). SOLD 👍
  3. Richter MX2 - Active Balance Control. Used but in full working condition. 10mm shaft - For full specification click here. Can be used to balance 2 magnetic pickups, or mix a piezo signal with a magnetic pickup. Comes with the battery connector, which as you'll see from the picture was been cut short (previously connected to a battery box), so the wires will need extending/connecting to a battery clip. I'll throw in a battery clip for free if you need one, just ask. SOLD including UK delivery - please contact me for other locations. Payment via bank transfer (preferred) or PayPal.
  4. Hipshot 5 string bridge, with Graphtech 'Ghost' piezo saddles - Used but in excellent cosmetic condition. SOLD
  5. For Sale: Aguilar Super Single 5 string soapbar pickup (P2 size). Neck pickup only. Previously fitted to a bass, but it's in excellent condition.. fully working and sounds great! Mounting screws included, no original packaging but it will be well packed for delivery. £75 £55 including UK delivery (tracked & insured). Payment via bank transfer (preferred) or PayPal. I'm happy to post outside the UK, feel free to message me for a quote 🙂
  6. Everything you need to make a pair of 6 string guitar, rail humbuckers.. apart from the wire. All parts are new/un-used. Black EMG style covers, black bobbins and rails, large (60mm x 15mm x 5mm) ceramic 8 magnets. I'll also include some 4 conductor wire. SOLD
  7. If gluing it back together isn't an option, then Cermag should have what you need.. https://www.cermagmagnets.co.uk/ceramic-magnet-page-36-c.asp
  8. Chantry acoustic and Ashwood (by Crafter) electro-acoustic guitars - Saved from the skip after being left in a storage unit for years by the previous owner. Both are in shitty condition.. covered in scratches, tuners are rusty, tops bellied, etc. You could resurrect them with A LOT of work, but as they’re both super cheap guitars, I see them more as wall hangers, some sort of art project? or simply practice instruments for those wanting to learn more about repair work or fretting etc. FREE TO COLLECTOR from Burntwood, Staffordshire (Sorry I’m not willing to post).
  9. Encore project, LP style with bolt-on neck. Approx 25 years old. The neck is nice and straight, some fret wear on the first few frets but plenty of material left for a fret level. The paint work has it’s fair share of scratches, along with some marks in the finish by the jack socket, courtesy of a rusting jack plate. Missing pickups & electronics (apart from the toggle switch), truss rod cover and jack plate. Comes as pictured, with tuners, nut, scratchplate, control cavity cover, neck plate & screws, tailpiece, bridge (plating has seen better days), knobs and pickup surrounds. SOLD
  10. Dunlop ''Dual Design'' Strap Lock Buttons (Black) - Brand new, never fitted. Buttons only, sorry NO screws included. SOLD
  11. If your strings are hitting the magnets, then your pickups are set too high. However, if the noise is being caused by your fingers touching the magnets, then grounding the magnets will solve the problem. Apply some copper tape to the underside of the pickup, making contact with each magnet. Solder a wire to the tape and solder the other end to the back of a pot (or ground lug on the jack). The noise will now be shunted to ground. Just be sure to use copper tape that has conductive adhesive, or it won't work 👍
  12. Check that the capacitor leg that connects to the pot lug isn't touching the pot casing, and therefore shorting out the cap. If that's OK, then check that pot lugs aren't making contact with any shielding foil/paint (or metal control plate).
  13. D'addario XL Nickel Bass Strings - EXL170S - 45-100 Regular Light Cut for a 2x2 headstock. Genuinely only used for 10 minutes! (customer decided he wanted tapewounds instead). SOLD
  14. Pete recently purchased a case from me. Payment was made immediately, good communication, etc.. a pleasure to do business with.
  15. Mick recently purchased a pack of strings from me.. payment was made straight away, a pleasure to deal with.
×
×
  • Create New...