rmorris

Hi. Has the buzz / hum come in as a definite 'step change' ? If it was okay before and then developed this 'fault' then logically one of two things seems to have changed - either the bass electronics : maybe a broken or damaged screen / shield - not easily seen if it is a non visible cable shield eg a shield connection into the pickup. Or the 'electrical environment' ie there is more noise. As warwickhunt says computers and striplights are suspects ( alongside crt monitors but they are pretty rare now ! ) but also energy saving bulbs or low voltage led lights and possibly any electronics. Don't ignore lights etc that may be in another room - eg bass in spare room above kitchen - kitchen lights changed to energy saving or low volts led. A wood and plasterboard ceiling is transparent to rf noise ! Once tracked down a regular noise from a guitar amp down to a DVD player in a downstairs room. If it's down to the bass then getting everything back to original should get you back to original noise performance. Shielding may help but the problem won't have been solved. Hope this makes sense and comments welcome. If not blame the time I spent in the EMC lab today :-)

Right. Which cable was it ? Split in the screen or signal or both ? Congrats on sorting it.

Interestingly I have one of thes - Aria Pro II Magna Series 5 string - as pictured. It has 3 pots only Vol / Vol and Tone Pot is where your 'missing' pot is ( there's no pot or switch where your third pot is positioned ). Unless it's a version thing then I think that a previous owner may have moved the tone pot from the original position ? If you remove the third pot maybe you'll be able to see if it looks like the hole for that is original or a diy job ?

alternative view: the effectiveness ( or otherwise) of tone controls in high impedance ( standard passive pickup ) circuits is always an issue due to the electronic parameters involved. Do you really need a high impedance tone control at all or can you better get the tonal variation wanted using amp / preamp / pedal controls ?

well I guess if you sell it you might be able to find out if the buyer would prefer the original tuners or the lightweight tuners ? Would seem a waste of effort to refit the elephant ears if the new owner is going to replace them with lightweights again.

Sounds puzzling. But can you test the SPX90 with another amp with an fx loop ? Is it okay if you plug into the SPX 90 direct from bass (or via pedal / buffer etc ) then into the input ( not fx return ) of the Trace AH250 ? etc...

I reckon it's handy to have an amp sim / DI option so you can go DI into the FOH desk and get an 'amp' sound if the gig setup calls for that. eg Sansamp BDDI ( I have one ) or whatever your preference - DHA / Alembic / whatever - but the point being to have an 'amp' sound rather than an overt overdrive / distortion ( though they are , of course , strictly speaking distortion effects ) and should provide a low impedance balanced ( interference and ground loop defeating ) output if you're sending it to the desk.

He bought my JOYO flanger. Quick with no problems. Cheers.

Did you get to the bottom of this ?

[quote name='winterfire666' timestamp='1327402790' post='1510503'] +1 for reaper, give it a go its free to try and very cheap to buy [/quote] add my +1 to that

[list] [*][url="http://www.audioprointernational.com/news/read/tl-audios-tony-larking-comments-on-plans-to-undergo-brand-restructure/04117"]http://www.audioprointernational.com/news/read/tl-audios-tony-larking-comments-on-plans-to-undergo-brand-restructure/04117[/url] [/list]

[quote name='JohnFitzgerald' timestamp='1328438492' post='1526797'] Cheers Mike I had kinda arrived at that concluion myself. The 1212M, having an ADAT connection seems like a good call. The fact that it's pretty low cost kinda helps too. If there's a little extra cash, I might actually bin it all and get a Zoom R16. 16 track, but able to record on 8 at a time via combo xlr / jack inputs. Also works as an audio interface to the PC via USB 2.0 and again gives 8 discreet ins to the laptop. That would cost £275, so not a fortune. Thanks again. JF [/quote] But I think you can only send a couple of tracks down the USB 2.0 to the PC at a time ? Easy enough to line them up just more time consuming and 'fiddly' Or am I getting that wrong ? from SOS review: Enter The PC The reason I don’t feel too inclined to dwell on the R16’s shortcomings as a mixer is that it is so clearly designed to be integrated with a computer recording system. Once you’ve installed its ASIO driver, you can hook up a USB cable from R16 to PC (assuming you have a USB2 port on your computer, which almost everyone does nowadays). The R16 will happily take its power from the USB connection where it’s available, and when it detects such a connection, gives you the option of starting up in Card Reader or Interface modes. Assuming you actually want to work on material recorded to the R16, you’ll need to use the Card Reader mode first, so that you can transfer the necessary files over to your computer’s hard drive. For some reason, all R16 projects appear to the computer as ‘PROJ001’ and so on, regardless of any name you’ve given them within the R16, but confusion is unlikely unless you’ve got lots of them on a single card. You can’t import Projects themselves into a DAW, but it’s easy enough to line up the audio files — helpfully, even takes that were started halfway through a Project are automatically extended to the Project start.

Don't know if this helps but a few years ago the thread stripped on one of the screw / claws on my Hohner B2A Steinberger Licensed Bridge leaving me a bit stuck. Eventually got one from the Bass Centre workshop for £10. Guess that not an option now but maybe a call to Bass Gallery or similar ?