Jump to content
Why become a member? ×

DanOwens

Member
 View Profile  See their activity

  • Posts

    1,120

  • Joined

  • Last visited

 Content Type 

Everything posted by DanOwens

  1. DanOwens
    Just put it on after your recommendation. That tone is more fretless than Double Bass, wouldn't you agree?
  2. DanOwens
    This is my full board that I put together for one of my signal paths for a DnB band but I've come to use it for lots of different projects. The Pedals all have heavy-duty hook tape on the underside but I was careful not to put too much on. ZVex Woolly Mammoth £130: I got this pedal around 2004. It’s a nice hand-painted job and different to most of the Mammoths I’ve seen. I used it to clip my signal into square wave territory with the DnB band and loved the sound it created. I’ve seen loads of clones recently but not many originals. Probably my favourite fuzz. Flightcase Warehouse Pedalboard £70: This is a big, sturdy flightcase. Sturdier than my Diago but also a bit heavier. The internal board has been coat with heavy-duty hoop tape but I never take that out of the chassis. The internal dimensions are 73cm x 39cm. Feel free to PM me with questions. Trades I’m not after: electric basses or other pedals. Trades I want: Double Basses and DB preamps. By all means offer everything else but I’m saving for a DB (or my newborn daughter, whichever my wife prefers!!)
  3. DanOwens
    Bump. I've contacted Hartke but I just can't be bothered with faffing with this.
  4. DanOwens
    Bump. Offers, anyone?
  5. DanOwens
    [quote name='MoonBassAlpha' timestamp='1466809485' post='3079155'] There's some great dinky little amp modules on 41Hz, some of which can run off batteries. May need some kind of a preamp too though. [/quote] The preamp in the Hartke works fine so I'll check it out.
  6. DanOwens
    [quote name='3below' timestamp='1466808951' post='3079148'] As this is a low power amp it will be fairly straightforward and low component count.The Tech can locate the fault, I just wonder what can be so wrong that it is not worth fixing? Did you get a clear detailed explanation? [/quote] I didn't get a clear explanation as I got the impression that diagnosing the problem would have been the costly bit.
  7. DanOwens
    [quote name='machinehead' timestamp='1466802889' post='3079067'] Use the volume control and your ears. I'm sure that if you're careful the LM250 will work fine. Frank. [/quote] Thanks Frank. I'll give it a go! I was kinda hoping for a little power amp box. I found a tiny 30w TDA2030 power amp circuit on eBay which looked simple enough (and the size of a credit card) but when I started to look into how to power it I realised I have no bloody clue about all that and would probably end up crispy if I gave it a go!! Anyone done any TDA2030 amp builds? Dan
  8. DanOwens
    I have a Hartke A35 that I put in storage for a while and on taking it out, discovered a fault. I sent it to an amp tech who said there's a fault on the board that wouldn't be worth fixing. So now I've got a nice enclosure, a nice speaker, but no 'head' section. I have a LM250 but I'm worried the little Hartke speaker won't take that level. Any suggestions on a solution? Any micro, low-watt heads around? Thanks!
  9. DanOwens
    Did this sell? ta
  10. DanOwens
    Hi Jez. Did you sell this?
  11. DanOwens
    Bump
  12. DanOwens
    Bump. Any offers?
  13. DanOwens
    Hi there, For sale is the case that my NS Design CR4M came in (I upgraded mine).There are two bags; one suitable for the bass and another suitable for a tripod stand. The main case is a cylinder and its internal dimensions of 135cm long and a circular diameter of 18 cm. The main case doesn't have a shoulder strap, but these can be easily replaced from any other bit of kit. Dan
  14. DanOwens
    Hi there, This Hartke A35 has a fault in the power amp stage (diagnosed by me and confirmed by an amp tech) which means that there is no signal coming from the speaker. He suggested the problem was somewhere on the PCB and it wasn't worth me paying him to repair it. The speaker is in perfect condition (10 inch, very nice sounding Hartke aluminium job), the enclosure is not too heavy and in great condition too, and the preamp can probably be used too (although my limited knowledge means I don't know how). I can post it but at 14kg it'd probably be best collected. I live in Bolton and work in Manchester and I'm happy to meet halfway. Thanks Dan
  15. DanOwens
    Looks like if you respond [url="http://en.audiofanzine.com/bass/forums/t.9653,test-out-elixir-s-new-nanoweb-bass-strings,post.21269.html"]HERE[/url] you get some free strings.
  16. DanOwens
    [quote name='BassBod' timestamp='1436386477' post='2817818'] One more thing - the other side of the bridge is often flatter then the top, so do consider trying that as it may sound better. [/quote] You're absolutely right. I've not even tried plugging it in yet but when it comes to it, I'll give it a go. Thanks!!
  17. DanOwens
    Thanks everyone! I'll check those clip suppliers.
  18. DanOwens
    I'm borrowing this bass and it has a pickup installed. It's missing a clip but looks like it has been attached using putty too; I'm just wondering what pickup it is? Thanks!
  19. DanOwens
    And I only own one so...
  20. DanOwens
    Which amp did you go for? If I could find a tiny power amp it'd be enough.
  21. DanOwens
    I've got an A35 I got out of storage a while back but I recently sent it to an amp tech. He said the fault is in the power amp section (consistent with the fact I get a tiny headphone signal from the effects out). What should I do? If the problem is in the power section then I've got a working preamp and nice speaker. Can I just get a little power amp from somewhere? It'd have to be tiny! Or do I just try and sell the speaker? I'm not keen to sink the £150 or so into a valve amp kit but my father-in-law has experience with audio building. Your help is appreciated!!
  22. DanOwens
    I suppose you could transition to tremolo quickly but no legato!
  23. DanOwens
    Are they quite loud then, Phil?
  24. DanOwens
    I spent my youth as a classical upright player and I'm currently planning my move from NS CR4M (with Helicores) to a Thomann 2W TN. I've been practicing with a Manouche quartet and I'm interested in adding a bit of slap to the set (Dubouchet-style) but since we're hopefully be busking unamped I have to consider the balance between volume and ease of slapping. What would everyone's string recommendations be to be loud, considering I'll be playing mostly pizz with some slap? Thanks!
  25. DanOwens
    Bump for new, unbelievable £300 price. My fiancee needs some expensive makeup brushes for Christmas!
×
×
  • Create New...