Mr. Foxen

[quote]...and no-one will ever get up and go to the bar.[/quote] And the landlord won't pay you to play any more gigs there.

The single driver cabs use the sensitive driver, the mi loaded cabs use the low driver. The Kappalite 3015 is more sensitive than most 15s, the 3015LF loaded ones are power hungry. 150w amp into the 2x15 does me for my stupid loud with no PA support stuff.

I'd be interested in the Dirnt neck if you o go for that.

Local furniture making place should have a thicknesser.

Apply some force, see if it opens.

Wet look: [IMG]http://i17.photobucket.com/albums/b69/Incarante/Wishbass%201336/secondcoat002.jpg[/IMG]

[quote name='Dom in Somerset' timestamp='1321994693' post='1445351'] That stuff that came out of the knot hole - have you tried smoking it? [/quote] Pretty much everyone that's seen it has suggested stash hole.

Just spotted this in my thread, ha: [quote name='billyapple' timestamp='1317466043' post='1390943'] Although I once finished a bass and it took me f**cking ages! Never again! [/quote] Got that pic yet?

Having trouble with loads of iron filings stuck to it from the wire wool. Been gathering with a magnet, but some are bit ingrained into the craggyness. Went over it all today with 1200 grit an white spirit, then wiped down with kitchen roll wrapped round a magnet. Got some liquid superglue to seal the bark edges, but have to wait for the white spirit smell to clear.

http://www.ebay.co.uk/itm/jones-and-co-bass-guitar-/330646577204?pt=UK_Musical_Instruments_Guitars_CV&hash=item4cfc126034 Anyone got any clues on this?

Wasn't me, only do that on things I want.

You just learned why mixing 4x10 and 1x15 is a bad plan, if you dig the sound of the 4x10, but need louder, get another one. If not, rig rethink time. Then you have to weigh the cost of replacing the 15" speaker against the sale value of the cab, considering it has a value without a speaker.

I like that someone bid so he can't correct it.

Oh yeah, had a good old swing on the headstock an didn't come off, so good to go. Finding the right socket to adjust the truss rod is gonna be more fun, imperial, but all mine are too thick to go in the hole. Edit: Quote made me realise how badly I typed this.

Gonna struggle on that sort of budget for playing with drums. A secondhand Peavey combo is probably best bet there. Features are pretty bad things to pay for at this level.

It isn't the evaporation of the meths that kills it, it absorbs atmospheric water and can rust strings if you leave them in for ages. With the increasing amount of methanol/alcohol in petrol, there is trouble with it rusting the tanks in classic cars that are left with a tank of fuel for periods.

http://en.wikipedia.org/wiki/Thiele/Small

Meths is cheaper than isopropyl, works the same. Absorbs water eventually and lets the strings rust, that's when I use it to light the bbq.

Kay: http://www.ebay.co.uk/itm/Vintage-Kay-20B-Bass-Rickenbaker-Copy-/170733282945?pt=UK_Musical_Instruments_Guitars_CV&hash=item27c07f2681 Much more interesting shaftesbury Semi: http://www.ebay.co.uk/itm/SHAFTEBURY-BASS-60S-70S-SEMI-ACOUSTIC-SEARCHERS-/160686223241?pt=UK_Musical_Instruments_Guitars_CV&hash=item2569a52f89

First coat of oil, rubbed on with wire wool to generate some sludge to fill the pores, will wait till hardens and rub back with fine wet and dry. [IMG]http://i17.photobucket.com/albums/b69/Incarante/Wishbass%201336/firstcoat003.jpg[/IMG] [IMG]http://i17.photobucket.com/albums/b69/Incarante/Wishbass%201336/firstcoat001.jpg[/IMG]

Think those Peavey 4x10s are tuned pretty low. Still curious about the dimensions so I can find out.

Shockwave was asking after them, and couldn't get, if enough people were interested, I could have them made.