Jabba_the_gut

I looked on the web too but couldn't find anything either. I was looking for something like this that you get for EMG pickups - I guess the Fishman ones won't be too far different. Look forward to seeing this bass complete. Cheers

Yaay! Looking forward to this

That is looking lovely - beautiful contrasting woods. Quick technical question with regards to the pickups, what is the layout of the sensing area? Just wondering as the B string is closer to the edge of the pickup than the G. I couldn't find anything online that showed the layout and I'm curious as these pickups look interesting as an alternative to other soapbars. Cheers

The pickup is back from being sorted so will hopefully get that fitted and tried out today. I really hope it has fixed the issue of the string balance.

The plan for this one is to be B-G (can always change that later). The low B should be okay for this and it has been done by others before. I'll let you know how it goes with this particular one!! I am building a 27" 5 string as well but the plan for that is to go E-C. I do have a low B for it and will try that when it's built out of interest.

I've been accumulating bits and pieces over the past couple of years and I'm getting to a point where an idea is emerging... This build will be a bit later in the years as I've got a couple of others to do first but the plan is for the following: 5 string Headless Delano xtender pickups East/ACG EQ02 filter preamp Series/parallel switching on pickups Poplar burl top Maple or swamp ash body (tbd) Ebony fretboard Neck (tbd) To be continued.....

I've just started what will be the slowest build ever. So slow it won't be complete in my lifetime. It will have a one piece sycamore body and a neck from the same tree. Here it is so far:

That’s on the job list. I’m just sorting a logo that can be made on a slide transfer to be lacquered over.

The control cavity was shielded with copper tape so that's done. Next was the wiring. The original plan was to have two knobs that do nothing and the other two to be passive volume and tone but I thought it might be an idea to see if the original preamp would work with a magnetic pickup instead of the original piezo. I've seen some preamps whose input is suitable for use with either but I have no details of this one so it was a question of just 'giving it a go'. And it does work, surprisingly well too. I'll chat with Owen to see how he would like it but it had to be tried as it was so simple to refit!!! Recessing the bridge has worked quite nicely - the strings can now go that little bit lower which makes quite a difference to how it feels.

The strings seemed a little high with the bridge at the lowest so I decided to recess the bridge a couple of mm into the body. That should allow a little bit of adjustment. That's the woodwork done. Next job is to shield the control cavity then sort the electrics.

Looking good. Be interested to see what you think of those Fishman pickups. Cheers

After the bridge and machine heads were fitted this little bass found its way to me along with some nice Delano parts. The plan was to fit a 5 string Xtender pickup and a Sonar preamp. After a little bit of looking it become clear that this little bass was just too little for the pickup - there was no way to fit it (even if you angled it) and avoid the battery or control cavity. The bass is very small and the pickup very big!! So a new plan was hatched and Owen opted to try a Delano P pickup as this could be fitted so the mounting lug ended up between the two cavities and one was available with a suitable string spacing (according to my measurements). With the bass being so small there isn't any option regarding placement - it just has to go where it fits!! This is the back of the bass to show where the treble side pickup lug would end up. As I say, not too much room for choice!! I made a test MDF template for this and then made a proper template after adjusting it slightly. After measuring, measuring again and measuring yet again it was time to make some sawdust. First off, removing the bulk of the wood before getting the router out. I used a couple of different sized router bits - a larger profiler first to do the bulk of the work, then a small profiler to get a small radius for the pickup corners. I used a few bits of string just to confirm the positioning is okay for the pole pieces. Still got a few things to do, but it's getting there!

I'll be looking forward to see how the finish on this turns out. I've modified a standard MM style 4 string scratchplate for Owen so it will fit this 5 string using the template I'd made when I did the same thing to my own bass. Much cheaper than trying to source a 5 string one!

Had a chat with House of Tone today and they are going to sort this pickup so with a bit of luck it should be back mid next week to refit. And I'm looking forward to that!

Crikey, it's been a while since I did any work on this one. Better get on with it!!

Well, I sent the pickup off to House of Tone pickups to look at and apparently it has been assembled incorrectly so they are going to rectify that for me. I have to say, their response to emails and looking at the pickup has been very quick. Great service so far!

Very, very nice. Can’t take my eyes off the headstock and back of the neck- just lovely. Interesting to see the breakdown of costs. I’m not sure how many people realise the costs involved. Even for a more standard bass, the cost of wood and decent quality parts can be as much as a decent off the shelf bass before you’ve done anything with them! Really looking forward to your next project. Cheers, Jez

+1 Super glue and wood dust will sort this. You might want to build it up in a few layers because it will go very hard and you'll save yourself some sanding....

Cheers for all the comments. I've tried changing strings - made no difference, I tried changing the pole piece heights to extreme positions but made no difference. I'll take the pickup out and have a look at the magnets to see if there is anything going on there if not then I'll replace it with something else. Thanks again

That's the limiting factor though isn't it - the shiny chrome bit!! That was something I was after as it suited this bass but I might have to change that. Cheers

Cheers both. I've tried adjusting the pole piece screw but doesn't seem to have enough impact. I have the E and G screws wound out so the whole screw head is showing and the A and D wound in with the heads a mm or so below the cover and it sill isn't balanced!! I'll keep adjusting but I'm already looking for a replacement to this pickup only problem is that there isn't much choice of what fits into that shape hole!! Might drop Retrovibe a mail to see if this is a common issue.

I'm nearing the end of building a bass with a mudbucker pickup. I've just installed and wired everything to try it out prior to finishing a few other bits and bobs. But.....I'm not entirely convinced by the pickup at the moment. I haven't used one before so don't have anything to compare it to as a benchmark. The pickup is a Retrovibe one and the pole pieces are pretty well aligned with the strings. The issue is that, to my ears, the A and D strings are louder and better defined than the E and G which sound quieter and a bit fluffy by comparison. This is the same no matter which coil combination I use (series, single coil or parallel). I have tried adjusting the pole piece screws to make them closer/further away from the strings but that seemed to make little difference. Anyone got much experience with these types of pickups that could point me in the right direction - any guidance would be much appreciated!! Cheers Jez

Still got a few things to do before but put this together to make sure everything lines up and works. I've wired the mudbucker to a 4 way tele switch that gives options of coil 1, coil 2, series and parallel. Quite pleased with how this looks (I still have to get a logo sorted for the headstock) and it plays nicely. But.....I'm not entirely convinced by the mudbucker at the moment. I haven't used one before so don't have anything to compare it to as a benchmark. The pickup is a Retrovibe one and the pole pieces are pretty well aligned with the strings. The issue is that, to my ears, the A and D strings are louder and better defined than the E and G which sound quieter and a bit fluffy by comparison. This is the same no matter which coil combination I use. Anyone got much experience with these types of pickups that could point me in the right direction - any guidance would be much appreciated!! Cheers

That will be absolutely fine. Most veneers come as 0.6mm thick (you can get constructional veneers that tend to be more like 1.5 to 3mm thick). I think I've only ever used 0.6mm veneers and I've always been happy with the result. These were done with 0.6mm veneers: Don't forget that when you round the corner you will be cutting across the veneer at an angle and the line will be more than 0.6mm thck.

Absolutely - lots of fantastic and varied builds going on.