morgano

Just seen your post cameltoe...PM'd

Few more sold - updated inventory...

Bump!

Not shown in the original listing, but the special Boss jack/jack cables are included too.

Several sold, but still plenty left.......

PM'd

Bump! Open to trades with electric basses too....

Still available...

Still available...

Still available....

Still available....

Still available....

[b]RME Hammerfall Digiface Digital Audio Recording Interface[/b] Top notch ADAT/SPDIF/MIDI interface with RME PCI interface card (Firewire) and a 5m Firewire cable. To use this to record audio you would also need preamp/s of some sort that have ADAT optical output or SPDIF output. In my setup I used two Focusrite Octopre's with ADAT I/O cards, each providing 8-channels i.e. 16-channels total, but it is possible to record up to 24 tracks simultaneously with this unit. It is working 100%, and has hardly a mark on it as it has been kept in a rack case since new. I have used it on Windows 7, 8 and 8.1. It is updated with the latest firmware. The RME system works really well - rock-solid stability and low latency. Insured delivery (Hermes) to UK would cost £8.50. [b] [size=4]Manufacturer's Information:[/size][/b] [b] [size=3][size=3][size=3][i]Connectivity[/i][/size][/size][/size][/b] [list] [*][i]3 x ADAT I/O (at 96 kHz via S/Mux)[/i] [*][i]1 x SPDIF I/O[/i] [*][i]1 x Stereo Analog Output (separate for submix/phones)[/i] [*][i]2 x MIDI I/O[/i] [*][i]Word Clock I/O[/i] [*][i]TotalMix[/i] [/list] [i]RME presents the [b]Digiface[/b], a highly extended version of the well-known PCI card Project Hammerfall (DIGI9652). Digiface offers 3 ADAT optical I/Os, ADAT-Sync In, SPDIF I/O and word clock I/O like its predecessor. On top, there are 2 MIDI I/Os and a separate analog line out. Thanks to its unique 'Zero CPU Load' technology Hammerfall DSP guarantees highest performance and lowest latency on both notebooks and desktops! [/i] [i]Digiface provides interesting features: [/i][list] [*][i]3 x ADAT digital I/O, based on RME's reliable Bitclock PLL[/i] [*][i]1 x SPDIF digital I/O, based on RME's reliable DIGI96 technology[/i] [*][i]1 x ADAT Sync In (9-pin D-type) for sample accurate transfers[/i] [*][i]1 x Word clock I/O (BNC)[/i] [*][i]1 x analog Line/headphone output, separate output for independent submix[/i] [*][i]2 x MIDI I/O, 32 channels high-speed MIDI[/i] [*][i]HDSP Meter Bridge: freely scalable level meters, peak- and RMS calculation directly in hardware[/i] [*][i]TotalMix: 1456 channel mixer with 40 bit internal resolution[/i] [*][i]S/MUX poured in hardware: 12 channels 24-Bit/96kHz for record and playback on ADAT optical[/i] [*][url="http://www.rme-audio.de/en_support_techinfo.php?page=content/support/en_support_techinfo_digicheck"][i]DIGICheck[/i][/url][i], RMEs unique metering- and analyse tool[/i] [/list] [i]... and numerous other features found already in the Hammerfall series. And all this for an unbeatable price! [/i] [i][b]Features[/b][/i] [i]The small box using half the space of a 19" rack doesn't show the included outstanding power and extensive features at first glance. The front panel hosts some useful status LEDs, like MIDI state, lock state of the digital inputs and error state of the host-bus. Additionally there's a high-quality 24-Bit/96kHz analog line output, also usable with headphones, and one MIDI I/O. [/i] [i]The back of the Digiface offers real Hammerfall connectivity: 1 x MIDI I/O, 3 x ADAT I/O, SPDIF I/O, ADAT Sync In and word clock I/O. This compact multi-Channel solution has everything you need. [/i] [i]The Digiface can be used with laptops as well as desktop computers. The connection to notebooks is achieved via a [/i][url="http://www.rme-audio.de/en_products_hdsp_cardbus_interface.php"][i]CardBus card[/i][/url][i], the connection to desktops via a [/i][url="http://www.rme-audio.de/en_products_hdsp_pci_interface.php"][i]PCI card[/i][/url][i] or [/i][url="http://www.rme-audio.de/en_products_hdsp_pci_e_interface.php"][i]PCI Express card[/i][/url][i]. These interfaces are sold separately. [/i] [i][b]Settings[/b][/i] [i]Just click on the hammer symbol in the systray of the taskbar and the [/i][url="http://www.rme-audio.de/images/products/df_set.gif"][i]settings dialog[/i][/url][i] of the Digiface comes up. The clear structured, easy to understand window plus the unique informative status windows for input signal, clock mode, sample rate and time code make your work with Hammerfall DSP System to a real pleasure. With a simple mouse click you gain access to the full power of your system. [/i] [i]When working with several digital sources it is not only necessary to know if these are properly locked, but also if they are totally synchronized. RMEs exclusive [url="http://www.rme-audio.de/en_techinfo_content.php?page=content/techinfo/en_sync_check"]SyncCheck[/url] ® checks all input signals and displays their actual state, and thanks to our new [url="http://www.rme-audio.de/en_techinfo_content.php?page=content/techinfo/en_intelligent_clock_control"]Intelligent Clock Control (ICC)[/url] concept you have all clocks and states under control - with ease. [/i] [i]A display of the time code at the ADAT Sync-In port offers a quick check of the communication between external device and Hammerfall. [/i] [i][b]Tech Specs[/b][/i] [i][b]Supported sample rates[/b]: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, variable[/i] [i][b]8 buffer sizes/latencies available[/b]: 1.5 ms, 3 ms, 6 ms, 12 ms, 23 ms, 46 ms, 93 ms, 186 ms[/i] [i][b]ASIO zero CPU load technology[/b]: 0 (zero!)% CPU load when using ALL 52 channels![/i] [i]All settings changeable in real-time[/i] [i][b]Clock modes[/b]: slave and master[/i] [i]Automatic and intelligent master/slave clock control[/i] [i][b]Enhanced Mixed mode[/b]: All inputs and outputs simultaneously operational[/i] [i]Unsurpassed Bitclock PLL (audio synchronization) in ADAT mode[/i] [i][b]Enhanced Zero Latency Monitoring[/b] for latency-free submixes and perfect ASIO Direct Monitoring[/i] [url="http://www.rme-audio.de/en_support_techinfo.php?page=content/support/en_support_techinfo_digicheck"][i]DIGICheck[/i][/url][i], RMEs unique metering- and analyse tool[/i] [i][b]Input[/b] 3 x optical (TOSLINK), 1 x coaxial (RCA), 2 x MIDI, word clock (BNC)[/i] [i][b]Digital input format[/b]: SPDIF, AES/EBU (Consumer, Professional), ADAT optical[/i] [i][b]Outputs[/b]: 3 x optical (TOSLINK), coaxial (RCA), 2 x MIDI, stereo analog line (1/4" TRS), word clock (BNC)[/i] [i][b]Format output SPDIF[/b]: AES/EBU (Consumer/Professional), ADAT optical[/i]

[b]Audio Technica Pro29HE high SPL dynamic microphone[/b] Typically used on snare drums, but works well in many other applications. Owned by myself from new, it has had very little use, and has been stored in a foam-lined case. Also included is a padded zipper case. Shipping by Hermes to UK would cost £3. [b]Specs.[/b][list] [*]ELEMENT Moving Coil Dynamic [*]POLAR PATTERN Hypercardioid [*]FREQUENCY RESPONSE 70-16,000 Hz [*]OPEN CIRCUIT SENSITIVITY -56 dB (1.5 mV) re 1 V at 1 Pa* [*]IMPEDANCE 200 ohms [*]WEIGHT (LESS ACCESSORIES) 290 grams [*]DIMENSIONS 171.7 mm long, 41.5 mm head diameter, 33.8 mm to 22.5 mm tapered body diameter [*]OUTPUT CONNECTOR Integral 3-pin XLR male ACCESSORIES FURNISHED AT8406 tapered clamp for standard 5/8” -27 threaded stands; foam windscreen; soft protective pouch [/list]

[b]Audio Technica Pro 37 R Small diaphragm condenser microphone[/b] Often used as overheads for drum, but has many other applications. Owned by myself from new, it has had very little use, and has been stored in a foam-lined case. UK shipping would be £3. [b]Specs[/b]:[list] [*]ELEMENT Fixed-charge back plate, permanently polarized condenser [*]POLAR PATTERN Cardioid [*]FREQUENCY RESPONSE 30-15,000 Hz [*]OPEN CIRCUIT SENSITIVITY -42 dB (7.9 mV) re 1V at 1 Pa [*]IMPEDANCE 200 ohms [*]MAXIMUM INPUT SOUND LEVEL 141 dB SPL, 1 kHz at 1% T.H.D. [*]DYNAMIC RANGE (typical) 112 dB, 1 kHz at Max SPL [*]SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa [*]PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical [*]WEIGHT 1.7 oz (49 g) [*]DIMENSIONS 3.9" (99.0 mm) long, 0.83" (21.0 mm) maximum body diameter [*]OUTPUT CONNECTOR Integral 3-pin XLRM-type [*]ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8159 windscreen; [*]AUDIO-TECHNICA CASE STYLE S1 [/list]

Barefaced Midget T (Series II) with Roqsolid cover (all black). I'm the original owner from new of this cabinet, and it has had fairly light use since I bought it (mainly rehearsals & musical theatre gigs). There is hardly a mark on it (thanks to the Roqsolid cover!), and there is no wear on the handle etc. It's all in perfect working order. This is the version with the tweeter and steel grillle. It has two Speakon sockets. There is an adjustment for the tweeter inside the front port, and you can turn the tweeter off completely if desired. An incredibly light 12" cabinet, with a tone that belies its size! Buyer is welcome to collect from Trowbridge, Wiltshire (near Bath/Bristol) or I can ship to mainland UK for £15.

I'm having a bit of a clear out, and this Boss BCB-6 Pedal case is up for grabs. It has space for 6 Boss effects pedals. There are also two other spaces where a power supply or tuner could be fitted. The lid has two sliding catches, and removes completely when in use. It hasn't had much use, so it hardly has a mark on it (most of the time my BCB-3 had enough capacity so got used instead). Dimensions: 64 x 30 x 8.5 cm. Weight 2 kg. Made in Japan Buyer is welcome to collect from Trowbridge, Wiltshire (near Bath/Bristol), or I can ship with Hermes, which would cost £5.50.

I have two of these stands, but only really need one these days, so I'm moving this one on to clear some space. They are great for raising amplifiers or cabinets off the ground. The angle is adjustable and the stand folds up fairly flat when not in use. Buyer is welcome to collect from Trowbridge, Wiltshire (near Bath/Bristol) or I could ship by Hermes for £5.50. [b]Quiklok's description:[/b] All-steel [b]double-brace[/b], low profile stand for large amps and combos. Tilt-back design adjusts for exact positioning from the floor and straight back brace will not interfere with open-back cabinets. Soft, rubber rest pads hold amps firmly in place while [b]adjustable leveling foot[/b] compensates for uneven floors. Fold flat for compact portability. [b]Dino-bite locking disc system[/b] provides secure, non-slip adjustments. Specifications Front tier height range: 21 to 28 cm (8.25" to 11") Back tier height range: 29 to 47.2 cm (11.4" to 18.6") Width: 49 cm (19.3") Folded height: 56 cm (22") Frame tube size: 20 x 15 mm Tier tube size: 28 mm Weight capacity: 45.2 kg (100 lb) Weight: 3 kg (6.6 lb) Color. Black

A Thon (Thomann) universal accessory/mixer flight case that I no longer need. It has mainly been used for storage of items at home i.e. it hasn't been out much, and hence is in very good condition. This is a good quality, well built case (I think Thomann have them made locally in Germany). One lockable catch, with hinged lid. Foam lined. Internal dimensions: 384 x 305 x 284 mm External dimensions: 412x 335 x 312 mm. Weight: 5.3 Kg Buyer is welcome to collect (Trowbridge, Wiltshire near Bath/Bristol) , or I could ship it with Hermes. It would cost £7.50 for shipping. If shipped, I would send it 'as is' with just some gaffer tape around the lid join to stop it from opening in transit.

I have a Thon (Thomann) universal accessory/mixer flight case that I no longer need. It has mainly been used for storage of items at home i.e. it hasn't been out much, and hence is in very good condition. These are good quality, well built cases (I think Thomann have them made locally in Germany). Foam lined lid and base. Two lockable catches. Internal dimensions: 650 x 450 x 105 mm. External dimensions: 680 x 150 x 480 mm. Weight: 7,6 Kg Buyer is welcome to collect (Trowbridge, Wiltshire near Bath/Bristol) , or I could ship with Hermes. It would cost £7.50 for shipping. If shipped, I would send it 'as is' with some gaffer tape around the lid join to stop it from opening in transit. Price £40 plus delivery.