Jump to content
Why become a member? ×

Painting a headstock


waynepunkdude
 Share

Recommended Posts

Easy job - I have refin'd a few headstocks & it's dead easy to get a pro-level finish, even using cheap rattle can paint. If you're going for natural, black or white I recommend Screwfix own brand spray paint / lacquer.

First, I roughen/flatten the original surface with light sandpaper, say 600 grit, then mask off the edges & nut/fretboard. Next I build up successive light coats of my base colour until it's completely opaque. I dry each coat with a hairdryer, which means the process is quite quick. This would be the point to apply a decal if you're using one. Then build up successive coats of lacquer in the same way, hairdryering between each coat. I tend to spray about 10 - 15 coats, because it's going to need some cutting back to get a good finish. The boring bit's next - put your neck in a safe place and leave it there for 10 days or so.

You'll have a fairly rough, orange-peely surface to your lacquer, so next, gently sand it with very light paper - I use 1200 grit for this. Once it looks smooth & even all over, break out the T-Cut until you can see your face in it.

This is my old Grabber copy (which I wish I hadn't sold!) which got a refin because the original brand (whatever it was) had been sanded off, & someone had attempted to draw a Gibson logo on in marker pen - which of course had sunk deep into the grain of the wood. Everyone loves a genius!

[attachment=35744:grabberhead.jpg]

Jon.

Link to comment
Share on other sites

[quote name='rapscallion' post='645889' date='Nov 5 2009, 12:17 AM']Any tips for staining a headstock Bassassin?[/quote]

Sorry, never done that - but I'd be interested in how to replicate an age-darkened maple look if anyone else knows.

J.

Link to comment
Share on other sites

[quote name='Bassassin' post='646026' date='Nov 5 2009, 10:08 AM']Sorry, never done that - but I'd be interested in how to replicate an age-darkened maple look if anyone else knows.

J.[/quote]


I've not done it but I've been told [url="http://www.behlen.co.uk/Merchant2/merchant.mvc?Screen=PROD&Product_Code=B103-021&Category_Code=AERFINISHING"]Behlen[/url] by the fella's here that this stuff has a sort of amber, aged quality stuff to it.

The gloss less so.

Link to comment
Share on other sites

[quote name='Bassassin' post='646026' date='Nov 5 2009, 10:08 AM']Sorry, never done that - but I'd be interested in how to replicate an age-darkened maple look if anyone else knows.[/quote]
Amber tinted gloss nitro available on this page:

[url="http://www.manchesterguitartech.co.uk/lacquer.html"]http://www.manchesterguitartech.co.uk/lacquer.html[/url]

Works fine, but steady hand and multiple light passes needed to get even colour distribution. Spray item [i]slightly[/i] lighter than you eventually want it to look, as the topcoat seems to bring up the underlying colour.

And clear nitro over the top. Can't use poly over nitro, apparently.

Edited by skankdelvar
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...