fender73 Posted Saturday at 13:07 Posted Saturday at 13:07 Hi all. Probably a common thing, but I am new to DB. Replaced steel strings on newly acquired bass (3/4 cheapie bought 2nd hand) with lower tension strings, and now the bridge is constantly falling forward and seems to keep leaning towards the neck. Luckily post hasn't fallen inside yet. Any easy solution? I have googled etc and have seen multiple things from putting rosin under the feet, reshaping the feet with sand paper, graphite in the nut slots etc. Ultimately will I think end up trying steel strings again as when they were on, the bridge never shifted. Is this common? Thanks in advance Quote
Happy Jack Posted Saturday at 13:19 Posted Saturday at 13:19 That could easily be a side-effect of the fitting of new strings, regardless of what type or tension they are. I assume you replaced one string at a time, rather than taking off the old ones and then installing new ones? 1 1 Quote
fender73 Posted Saturday at 14:05 Author Posted Saturday at 14:05 Hi, yes one at a time and all carefully done with tuning and tension etc. Quote
Burns-bass Posted Saturday at 14:14 Posted Saturday at 14:14 Sometimes the strings can drag the bridge forward. It’s worth checking the angle, especially if it was fine before. What lower tension strings are you using? 1 1 Quote
Beedster Posted Saturday at 19:00 Posted Saturday at 19:00 As new strings stretch the bridge can get pulled towards the neck, if so you'll need to pull it upright frequently, but once they settle down the bridge should be stable 1 Quote
fender73 Posted Saturday at 22:40 Author Posted Saturday at 22:40 The strings are Thomastik Super Flexible. Quote
Paddy Morris Posted yesterday at 00:02 Posted yesterday at 00:02 Good video by Hervé Jean here: But also if the new strings are a wider gauge than the old ones, maybe the slots in the bridge are too narrow, so the strings are tending to stick as you tune up and pull the bridge forward? A luthier won't charge very much to adjust the bridge feet and slot width for you. So if it continues then get it booked in. I went from steel to gut and my bridge was always collapsing. A luthier fixed it for £150. 1 1 Quote
fender73 Posted 17 hours ago Author Posted 17 hours ago Thank you all for your advice, must appreciated Quote
fender73 Posted 7 hours ago Author Posted 7 hours ago Carried on trying everything within my skill set and knowledge but bridge still drops. Am worried I'm going to damage it now so off to the luthier it goes. Let's see what happens. Again, thanks for the advice all. 1 Quote
Paddy Morris Posted 3 hours ago Posted 3 hours ago 4 hours ago, fender73 said: Carried on trying everything within my skill set and knowledge but bridge still drops. Am worried I'm going to damage it now so off to the luthier it goes. Let's see what happens. Again, thanks for the advice all. Good luck! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.