G&L M2000 Trib fret buzz

[Johnny Reggae]

New Bass Day! Just got delivery of this beautiful looking M2000 Trib GTS edition which looks the biz with trans black flame top and white binding. It sounds great too however after trying to set up the action to match my L2000 Trib which I've been playing for 10 years now I've concluded the upper half of the neck has a slight ski jump slope. I've read a few posts about this same problem with these later Tribs. Seems the QC isn't the same as some of the earlier ones. I like the action nice and low.
So my question is, has anyone successfully flatted the upper frets with a file or stone to rectify the problem? Any advice on set up, other than 'take it to a sprofessional'?

[jay bass]

Have You Adjusted the truss rod to Approx 012m at the 7th Fret , string gauge and tension will also affect adjustment if youve changed them?

Edited 10 hours ago by jay bass

[Johnny Reggae]

I've adjusted the truss rod but not sure what you mean by 012m ?

[bloke_zero]

If you've adjusted the truss rod then that should be ok.

 

I'd guess Jay means the standard .012” which is the fender standard: https://www.fender.com/articles/maintenance/how-to-measure-neck-relief-on-guitar-or-bass

 

I'd take it to a pro personally.

 

That is a beautiful bass!

Edited 4 hours ago by bloke_zero

[Johnny Reggae]

Thank you both, that’s really helpful. I’ll get myself a feeler gauge and if it persists I’ll take your advice and take it for a decent set up. Any recos for one in west London?

[Lozz196]

Could just be a tall fret.

[BassAdder60]

Great looking bass and as mentioned perhaps one or two high frets 

 

I would get a luthier to work on it if you want a flatter neck and don’t attempt it yourself unless you’ve done it before 

 

 

Edited 1 hour ago by BassAdder60

[Sean]

What a looker.

If you lived in this shire I'd offer to have a look but take it to a decent tech.