Bass neck weights...

[Muzz]

Hokay, so apologies up front for anyone I'm boring to tears with my neverending search for lighter and lighter basses, but I'm also looking at the Frankenstein approach to putting something together, given how good the Squier Sonic P is sounding after I'd finished with it (replaced bridge, tuners, pickup and EQ).

 

Soooo, I've found a Paulownia-bodied P-bass for buttons (it's apparently 7lbs on the nose including 'normal' tuners, etc, so I'm thinking I can get that down a chunk with Ultra-Lites and an Aluminium bridge), and I'm thinking a replacement neck to elevate it a little - I thought this about the Sonic, but it turned out to be good enough not to bother...I doubt this one will, tho.

 

To the point (hurrah!): anyone have any guides as to what's a heavy neck and what's a light one? Or are they mostly close in weight? I'm looking at a Northwest Guitars jazz neck (amongst others), should I be paying attention to the weight, or am I overthinking the whole thing?

 

Cheers,

 

Muzz

Edited 7 hours ago by Muzz

[ikay]

Neck weights can vary quite a bit. I used to be obsessed by weight and went through a phase of weighing everything in sight! Looking at my data, I've had clean neck weights (without any hardware) ranging from 725gm ( 25oz) to 850gm (30oz). The heaviest neck I've had was a Warmoth which clocked in at 1.1kg (38oz) - but that one had stainless steel reinforcing rods.

[Beedster]

Wood is wood, they will all vary, but Jazz width, shallow, and small headstock will be lighter all other things being equal. Material of truss rod will be a factor also

[Beedster]

…and narrow frets 👍