D.I. output from Bass Amplifiers

[MartinB]

20 hours ago, Downunderwonder said:

Work around round 2: install a switch to cut out the speaker.

Plugging anything into the headphone socket on the rear panel should disable the speaker - even just a dummy plug

[Downunderwonder]

12 minutes ago, MartinB said:

Plugging anything into the headphone socket on the rear panel should disable the speaker - even just a dummy plug

Given the state of the canine breakfast the accent is on the SHOULD.

 

Any bets it won't disable the DI at the same time?

[Stub Mandrel]

4 hours ago, Judo Chop said:

Version 1 is affected by the gain only but the newer versions are affected by both

 

Seems that circuit diagram is for the Terror 500 mk 1 do you have the diagram for the Terror mk2?

[ian61]

Dont think Ive ever turned the master down once setup after sound chk. Seems an odd problem to have.

[Dad3353]

3 hours ago, Downunderwonder said:

...Capiche?

 

Capiche. Thank you. It would appear that a change of amp is required; I can't recommend one, though (I'm a drummer...). 

[JoeEvans]

I think MartinB has it - if you like the tone of the DI from the amp, just stick a plug in the headphone socket, as long as that doesn't also mute the DI. A very cheap technical fix.

[Judo Chop]

3 hours ago, Stub Mandrel said:

 

Seems that circuit diagram is for the Terror 500 mk 1 do you have the diagram for the Terror mk2?

Not to hand but I recently got a mk2 and the DI out is definitely affected by the master volume 

[Stub Mandrel]

1 hour ago, Judo Chop said:

Not to hand but I recently got a mk2 and the DI out is definitely affected by the master volume 

 

I will have a play... never had any questions about varying levels from a sound guy.